Search results

That 140w light is enough to flower a 2x2 tent

Loads of blue at the end of flowering could be interesting to see

How did I manage to harvest 200gr out of 70-80watts? lol

I am going to rewire everything tomorrow. It has something to do with the wiring since last run I had apparently no problems even if I never tested it: I harvested 200gr off it, I doubt that was 70-80watt. BXEB-L0560Z-35E2000-C-B3 If we look at the datasheet, page 6 figure 3 we can see that at...

Current output is 3.6A 3.6 / 8 = 0.45A per strip Looking at eb2 datasheet, at 450mA voltage is a bit over 19v Since there are 2 strip in series I should have a configuration of 8 strips in parallel with a voltage of 38+ It is a B driver so I can only use the pot to adjust the current, not the...

Need help reviewing my math: 16 eb2 strips 2ft 3500k wiring is 2s8p (voltage measured is 36.7-36.8v) driver is an HLG-150h-42b watt-meter measures only 70-80w what could be the problem? (can't measure the amperage atm)

I would do 4cobs in a 60x60 and 5 in a 80x80 but you would probably get an hotspot in the center. You have more power than you need, run 120-150w in the smaller tent

Thermal paste

You're from eu. On ebay you can find a store called export-estonia selling citizen cobs. They sell a pack of 5 clu048-1212 90cri gen6 for about 50-60eur. 4 cobs at 1.05A in a 60*60cm tent are good enough. Driver off tme.eu You don't need any reflector

I can't really understand why do you even read this section

oh lol the shitstorm begins I always thought that PPF is not weighted while YPF weights photons differently based on plant response

As long as they are cheap and do their work...

@Moflow thx, really appreciate your willingness. They just need to make them with separate channels

Oh well I thought we were talking about linear strips not boards.

No, lol no really No

Any more info about the 660nm strip? I inquired feidaming for royal blue+uva and 660+730 strips but they quoted me at 480usd for 10pcs lol

What led are you using?

99% users of LedG forum grow weed His builds are tailored for that kind of grow. Check the cannabis section btw For flowering cannabis it is suggested to aim for 30-35w/sqft to reach a good amount of PPFD. Now you have the total wattage needed, decided what kind of tech you want. Strips? Find...

??? There is no reason to make one single giant frame but I am probably missing something. With 2 frames you can adjust the height on your needs + easier to handle due to lower weight two 60x120cm frame, obviously you will mount strips parallel to the 60cm side if using 560mm version Btw I...

Hey Can't understant how a 4x4 tent should be hard to be illuminated with strips. Strips come in 1-2-4ft lenght, If you make two 2x4ft fixtures you would be rocking a 4x4 tent. Arrow now offers DDP shipping and you receive the package at your door without the customs hassle. Dunno why someone...