Search results

These are my plans after I finish this next yield.. let me know what you guys think !! Thanks 24’ x 10’ room (Sealed/ Framed/Drywall/Mud Finished/Back of drywall panels Sealed w/ Liquid Rubber and all seams filled with silicone) Reflective Mylar walls (Glued to drywall) 2x 24k BTU Mini...

You know what I mean lol couple pounds won’t cut it for me. Also this plan is just for now till I can purchase everything I really want for the big boy setup I have planned for after this run. You know this stuff costs a fortune lol

Ok so I just finished my first grow a month ago and been planning this room for a while now.. I had an 8x8 room with 4x 1000w air cooled HPS lights (could only run 3x due to heat issues) and I managed to yield 3 1/2 pounds off 11 plants (had 12x but one was just 1’ clone I threw in just because...

Room will be 24’ Long X 10’ Wide walls will be framed with 2x4’s and drywall I want to do a sealed room so I planned on getting about 5 gallons of black liquid rubber to “paint” onto either the back or front of drywall and silicone all the corners, etc, etc. and then wrap the walls with...

Is it possible to have the co2 burner hanging outside of the grow room while connecting metal duct work on to the opening of the generator and possibly run the duct work through the ceiling joints and then have it running all the way down the middle of my room with multiple downwards protruding...

Doing 3k HPS (4x installed but heat issues, till I buy a mini split) ina 8x8 right now. I’m going to start building a 24’ x 10’ next week. Plan is to eventually get 12x led lights on 12x plants

I actually plan on using most of the equipment, also knocking down two walls and extend them to make the room 3x its size but get rid of the HPS lights/ballasts and upgrade to LED.. and possibly swap over to going in hydro..

Thanks brother. Yeah I mean. I thought this site was here for help.. I didn’t know only pros are allowed to grow. Simple question should get a simple answer. It’s okay tho. I believe I’ll yield about 4 pounds minimum off my first grow ever from 3x 1000 watt HPS lights. I plan on going big...

Here’s my setup… reducer tape got hot and weak and fell off the 12” inline fan so ima take it down today and weld the reducers on so they won’t ever fall off again

I may be a first time grower. But I spent 7000 on my 8x8 room snd here my plants from about 5 days ago. But the two with my hand on the picture are from today. They’re only 31 days into flowering. So I can actually grow 12x plants under 3k watts in a 8x8 (I have 4x 1000w installed but been using...

I haven’t picked out a specific LED but I have a few in mind. Which would be… I could possibly run 800w LEDs instead. Just depends what I can afford after this yield. I know for sure I’ll spend min. Of 3-5000 on lights for my new run. I was looking at these, also the 600 watt one for $500...

I was actually thinking either that or 12x 17-27gallon totes with a 50-100 gallon main res tank with a 1 1/2 HP water chiller RDWC system. With a 12x output air pump 3600 GPH with 2x 8” circle air stones in each tote

I’m growing in a 8x8 w/ 4000w HPS with 5.5 gallon air pots & 12 plants at the moment. I’ve learned the bigger the pot, the bigger the root system hence giving you a bigger and wider tree.

It was just a simple question. I understand what you’re saying but a quicker reply of a approx number would have been sufficient but thanks Either way, You’re correct

lol you guys. I’m a first time grower but I Atleast studied all of the most basic stuff. Yes, when I purchase and upgrade from my 1k HPS hoods. I will be spending around $3200-4000+ on 4x LEDs. Because I plan on ending up with 8x 1000 watt LEDs inside the new 22’x10’ room I’m building next

Simple enough. Thanks for the info. While in veg I definitely did some experiments with some nutrients haha. Whatever I did seem to work out okay lol

1/2” pvc running through wall into growing room hooked up to 3x 8 output manifold heads.. 30 gallon water tank… height from floor to max heigh is approx 4 foot. Which one of these pumps would work best for my set up ?? Or are they overkill ? Or should I use a different type of pump ?

At the moment I’m using humboltds secret base A&B with a dash of silica and cal mag lol I was adding a little epsom salt too. Should I stop that now that they’re flowering ? I think a little liquid kool bloom and flower stacker would make them fatten up and grow a little better no?

that’s about what I had in mind and was going for. Thanks

Alright. I figured about 6-8 more weeks myself. I was talking about chopping just yet lol. Was just wondering if anybody could guess approx time or if they looked ahead or behind. Thanks tho