Search results

Notice most of you said to hang whole plant but will the results still be similar if I buck it freshly cut then put to dry on a net? Should I remove large fan leaves before putting them on the net? Usually 5 days it'll be ready to cure if I were to do a wet trim so with more leaf on maybe a...

Personally I would do 2.5 gallons of the organic compost, 2.5 gallon peat moss, 2.5 gallon of pumice, and 2.5 gallon of the soil conditioner(keep in mind I do not know the consistency of this product, if it feels like a light fluffy aerated producted you should be okay, if its thick like compost...

He needs more media not to recharge soil I believe.

How much pumice is in the bag? And by Bumper Crop are you using this product? https://coastofmaine.com/product/bumpercrop/

will take better pictures on lights off thanks for the replies.

Pictures below. Thoughts? Only affected growth is the lower portion of the plant. Plant height about 4-5 foot. Bottom foot of the plants in the room seem to be doing the same thing. Upper 2-5 foot luscious green.

Can I buck freshly harvested buds, put onto drying rack brought to proper moisture levels for cure, then store them into a container until it can be properly hand trimmed? Trying to avoid using auto trimmers since these are exotic indoor buds but I don't have the space to do a full plant hang...

Got a bunch of these lights and the room will be using co2. 6 feet max height. Should I keep them high for light overlap(2 ft) or keep them close(1/2-1 ft)? Aiming for 1000 ppf across the canopy.

YOU ARE THE MAN! This only reinforced my mindset. As I was a bit wary because the company did tell me that the lights are very comparable but I thought there is no way. Then I took a look at the chip and it showed higher wattage and I read somewhere online that the lower you run it the more...

Looking at buying a fixture with a 800 watt LM281b fixture as opposed to same fixture with LM301b. What is the difference between the two and is it significant? Almost a 50% price difference.

Some of my plants caught some mold and as I went in to cut off all the infected areas I found these tiny black bugs that look a lot like thrips crawl out of it. The surrounding area of where the mold was, was surrounded by black specks and I even noticed some translucent smaller offspring of the...

I have an early mold infection due to electric turning off the past 2 days which resulted in my dehumidifier and fans turning off. I know the general consensus is not to use any oil foliar sprays which will burn the leaves, to ventilate the room for 3-4 hours prior to the lights turning on and...

It's starting to show early signs on my Gelato #33 which makes up about 33% of my room. And I'd say from visual inspection about 30% of the buds are infected with very early signs of mold growth. Im looking into a sulfur burner.. I believe it may be best!

What about sulfur burning??? Anyone with experience in late flower with this? I heard it affects bud taste. At this point Im thinking of harvesting early for an 8 week strain. Currently 17 days away from the 8 week mark..

Is there any home remedies I can do a complete spray that won’t leave residue on the buds that isn’t an oil? Something I can do as I wait for the bicarbonate to come in. 6 days is too long.... I heard baking soda works and milk. Im thinking of spot spraying with some baking soda will that work...

Here it is. ☹️

So my power went out during lights off and the dehumidifier and fans weren't on for about 12+ hours and the next day same thing happened. I feared for mold as the humidity can reach past 70% if the dehumidifiers aren't running + no air circulation. So the next few days I looked around the garden...

I made a home-made Clear Rez with Calcium Hypochlorite and have been dosing every 3 days with it. The water is clear, no gunk. I'm just trying to figure out why the stems are rotting. I was under the impression that 80* F with the Clear Rez was optimal for quick root growth. But It's been about...

Can alkaline ph of 8+ prohibit clones from rooting?

I cleaned it with bleach prior. Soaked the manifold, rinsed and changed the water. Washed all my inserts with heavy bleach in the washing machine. Can't scrub inside the manifold but I did my best to shake it around to get all the gunk out and bleach inside of it. I just used some PH down to...