Search results

Don't supplement co2. Unless you have a good sealed room, waste of money.

How many plants depends on how long / how big you want to veg the plants, also how much you want to harvest. I would do either lst or scrog. No need to tie down branches when you have the screen to keep them down. For dwc is usually air pump. The water pump will clog with roots once it gets...

I'm seeing ~$8 each. Is it so much better to put a fan on each vs lot of airflow around the cab?

I'll have to look again. The ones I saw we're just as much as bigger ones. I wonder if I could run 14 watt with a fan. Though they're fairly warm to touch as is

So threw two of the vero together for seedlings. I can put one more on each end or remake it if need be. Was just cut offs from making the cab. When making the cab I mathed wrong and my sides didn't fit so they're left off. Good thing as I needed the flex to get it into location

Just that newegg and Amazon have free shipping which skews over all cost

My bet is that it's not "true aeroponics"/high pressure aeroponics. In which case diy is simple and much less expensive.

As far as I can tell, there's no link here, ha. If I'm understanding correctly, that three way switch is running the drivers in parallel when running both of them? Have you continued to run this to know if it causes any problems?

Put a couple of seeds on paper towels for germination. Couple years old so fingers crossed. 4 Rosenthal's Super Bud x Blue Dream 4 Purple kush a Sweet Afghani Delight For flower I may put all the vero in and use my cfl rig for the mothers / clones / veg for the time. Being that there's very...

Amazon has the arctic alpine 11 plus listed as in stock October 18 for $15.99 each. Looks like for my purpose the heat sink USA would be cheaper going passive if not for shipping cost.

https://www.rollitup.org/t/voidlings-bunk-bed.886808/

So I've made a move before I got to use the little cab I was making. I really hate the panda film but will be using it again. Once the film goes on it'll be about 27" x 20.5" inside footprint and 30" tall. I currently have 7 x vero 10 with 300mA drivers for each. Would need bigger heat sinks...

Thanks for the heads up on flux's thread. I've recently made an acquaintance that had a full machine shop, unfortunately he can't exercise aluminum for heat sinks though. But can easily machine polish one down for me easily. I'd been wanting to learn to make nice cases like stardustsailor's...

I'm not expecting 50g/sqft but it's good to have a goal and a dream. I grow in coco coir. I'll start a thread and send you a link and we can pick up the conversation. I've hijacked this one plenty already :)

Expensive is relative and all, just get spoiled with Amazon free shipping. I need a replacement fan for my arctic alpine 11 plus heatsink. The fan is $3, the shipping is $14. I bought the heatsink for $12 last year with free Amazon shipping. Heatsink usa is $25-30. For a couple small light...

What would be the reason to go with these plasma over the high efficiency diy leds going on?

3 for vegging? I have 7 that are just sitting around collecting dust so no expense of buying any until flower. Which unless I can run two 50w cxa3070 in there I have to get a lot more of the vero anyway. I'm not worried about the cost of an extra couple watts either. Especially if I can get...

Well I had thought the area was smaller and was going to be just for moms and cloning. Had to planned to drop three of the vero 10 @ 8w in it for veg. Guess I need to put 4 or 5 in it. 1g per watt 50g sq ft 50w / 7w = 8 vero 10 per square foot if I do fairly well. I need new heatsink to run...

I found the stacked driver thread 2 drivers 1 cob https://www.rollitup.org/t/2-drivers-1-cob.856082/

My space turned out to be 30" x 21.5" and 30" tall. Much bigger than I was thinking. I'll probably start with it for seed, cloning, veg. When time to flower pull the clones out into a smaller cab and add extra lights