Search results

Easiest thing , buy a KILL-a-watt or two and run all your grow equip through it......then you will know EXACTLY what you are using and how much you should pitch in. I have roomies and this is what I do to keep everyrhing fair.

Thank you for your input/advice guys!

Hey guys! Just another newbie, trying to be self-supplying. I'm running my second grow now and am trying the SCROG method with 1 plant in a 2x4 under 5 cxb3590 LEDs. When I put my plant uinder the screen I put it a bit low and ended up cracking one of my branches at a node. I taped it up and...

it doesn't not matter how many, as long as they're even(I mentioned doubling) and the supplied voltage is adequate.

someone correct me if wrong, but you can get a 1400 and then later just double your cobs, run them in parallel with the first group and you'll get 700ma current per string. If all cobs run in series, they will all see the 1400ma. In parallel the current is divided between the two strings if...

No, just chunks of metal that I drilled holes into, then inserted cartridge heaters. Each heater is 120watts and measures 8mm x 60mm . Industrial Metal Supply is the store I bought the chunks of round stock from, them I drilled/bored holes into them with a drillpress for the heaters and...

Everything was made with parts from Amazon, metal from a supply house, and a Harbor Freight drill press ($60). Plates are 3"x1" circles. Heaters are 8mm by 60mm , 120watts (2 per plate). 1 K-type thermocouple per plate. The computers (PIDs) are MyPin TA4-RNR which have build in mechanical...

@Airwalker16 What would you like to know about my press? I think this is a better place for rosin press questions /discussion.

What would you like to know exactly? I think there is a better thread for that info, I'll tag you in it.

You're looking at a piece of 4" aluminum channel left over from my rosin press build. It's thinner than the stuff I ended up using for the press. Both pieces bought as scrap/remnants at local metal supply.

Well, since time is on my side with the heat against me, I figured I would just veg until it's full. I planned to then just prune out anything extraneous and go from there, thoughts? My 1st grow was 28 cuttings of this same plant(money maker) in a (SOG), so my thought/goal with this scrog...

Looking super happy! Must be nothing like my hot and dry setup! Haha.

Getting along pretty well with mine! Heat is a huge problem for me in the summer, even with the LEDs, so I'm just vegging and practicing my first scrog (2nd grow). I'm not too sure how much light is suggested for vegging but im dimmed all the way to 70watts from the wall. I plan to rebuild my...

Took a week to ship and 3 days to arrive.

I'm a newb and rooted my first cuttings in feb this year. my buddy hooked me up with 36 clippings and 29 rockwool cubes. Instead of getting more rockwool I decided to used some 'wet foam' after a little research and seeing it mentioned as suitable for rooting. All of my cuttings placed in...

Your amperage per cob is up to you, decided by the output of your CC (constant current) driver. Of course you must stay within the wattage rating of your chips ( volt x current). I have the Mau5 kit from cutter, so my cobs are driven at 1.4a at full power. With 5 cobs @ ~36v this is close to...

Yup, pretty sure it's all the same

You can use screens, but I just form my flower into pucks before pressing and that keeps all the plant matter together. You can use you fingers but I like to use an empty medicine container and a calibration weight.

Thank you .

Example of some Solventless I've made. This press has inspired me to finally just grow my own(one grow under my belt, feelsgood! ). ..single source SHO,can't beat it imo *1st image is rosin I pressed but I did not grow the flowers* 2nd image is all me