Search results

i have found you multiply the weight times .22 and you will be very close 623 x.22=137.06 . i do not leave on stems so i am usually with in 5 % if i take the time to wet weigh the crop with this formula.i did not come up with the formula i read it online some where but have used it for years now.

623 wet should be around 137 grams dry.that is a nice harvest.if your wet weight included stems my numbers are wrong.

i am using the phat filters by hydrofarm now.i have used can, active air by hydrofarm,a generic from htg and phresh.i like phat better then everything.if your humidity is high none will do a great job long.my presh isnt a year old and is starting to fail.my active air filters have lasted up to 2...

my 3500k are on their way and my heat sinks are on the way.i already have my drivers.cant wait to try the new experiment!

for some ideas google marlos wall of weed or google vertical first attempt .lots of pics and good advice in those threads

google krusty method.5 1k bulbs in a 10 foot by 10 foot room.1 in each corner and 1 in the middle.4 plants o x o x o x o x o x is plants o is bulb alot of people have done it this way and get 10lbs per room using ebb and flow.

@Supra there is a wait for for the cxb 3590 3500.the 3000k cxb is not as efficient is it?is it worth it to wait for the 3500 or will the 3k or 4k be as efficient.i had pretty good results with 4k pll bulbs along time ago from start to finish.thank you for all the help you give everyone on here...

i am talking about a 4 foot tall by 4 foot wide plant tied to a wall 1 layer thick(maybe 6 to 8 inches deep ) using efficient 1 or 3 watt leds or even the vero 10's in a light just as big as the screen within inches of the plant.instead of using 16 cxb chips why not a whole bunch of low wattage...

depth is not zero but my vero 10 veg light penetrates more then 6 inches.the cobs penetrate more then a couple of feet.my screens are usually only 6 to 8 inches deep.i keep everything pretty much 1 layer.even my 5 year old commercially built 1 and 3 watt leds could have handled a 1 layer scrog...

if i use the 10.0 inch profile at 5 inches it is a few cents cheaper then the 10 inch 5.88 profile.

@Supra after seeing how there is no depth on ttystikk's plant,is there a lower power option to get the same ppfd as efficiently on the screen since that style of growing doe not need the penetration of the cxb and use alot more low power ones directly in front of said trellis?that is another of...

i will be cleaning out the inside of the plant.i might try one from the top only and 1 surrounded by the same number of lights. i think even though there wont be the same ppfd with the lights spread around,the light from one side should penetrate to contribute on the other side and vs versa...

i am planning on putting the same fencing you use on your trellis but wrap it around the plant.i am not sure what size the plant will end up.i have not tried this style of grow before. i want to try so i dont have to shape and and tie the plant up and just let it grow.it should veg faster...

@Supra ,i ordered the ebay driver you recommended a few posts up.50 watt 1500 ma i am planning on buying cxb3590 3500 chips. i plan on using the ideal holders and the 80 degree lens. i am planning on buying the 5.88 profile from hsusa in 10 inch length unless you recommend something else for...

my temps usually dont go over 83 in the summer .the bare bulbs with a slow fan underneath blowing up to the carbon filter and fan works great. summer time i usually run top bulb at 600 and bottom at 450.in a bad heat wave i might have to run both at 450.

i usually pull around 900 grams in 12 week cycle.i have pulled 1200+ grams a few times.i have been growing this way maybe 5 years now. i start shaping the plant like a candelabra after it is 8 inches high and trim the front and back off so it is one layer thick

it is a scrog.the plant is tied to the wall usually one layer thick.i have 4 plants in a 6 foot high cabinet 4 foot wide and 4 foot deep. i have 1 plant tied to netting on each wall and 1 removable rack in the door way with another plant tied to that.i run two digital 600 hps bulbs in there with...

i am not sure if i will need to light from the top.i originally planned to light from the top also i am not sure if i need to use lens. that was the point of my asking what others thought. i only have 3 50 watt cobs laying around. all my plants are tied up one to a wall and shaped for a...

you are planning on lighting a 4 foot by 6 foot trellis with 800 watts spread evenly over the trellis.i grow this way now like you do but with hps. i am planning to light a 4 foot tall by 4 foot wide area with the light being applied from all sides towards each other.i am not sure on how to...

how many lights to surround a 4 foot high well vegged bush say 4 foot wide. it is a plant so there is not a finite size.everything i read on here is based on flat grows. if i run 200 watts per side but the light from all sides can penetrate through that would be total over kill. the height is...