Search results

  1. alexonfire

    DIY Water reservoir chiller

    I think the way a peltier works to cool is that you need to exhaust the heat outside of your grow area. Like a wall or tent divides the cold side and hot side. If they are in the same space you are using watts which is energy (heat). To help dissipate more heat you could use a heat sink with a...
  2. alexonfire

    Can I use existing duct work?

    That will work, just make sure you have it pointing the right way. If your going to use this system then it will seem like your furnace is always on no? Make sure you have a good carbon filter otherwise your whole house is going to smell like weed. I would also install a backdraft damper on your...
  3. alexonfire

    Thank you for the reply. Isn't the CXB2530 only half as powerful as the CXA370 so would I need...

    Thank you for the reply. Isn't the CXB2530 only half as powerful as the CXA370 so would I need 2 x CXB2530? And use that same driver to drive both? Should I look into a dimmeable driver so I dont risk burning the tops if they get too close?
  4. alexonfire

    Hey Supra! Lots of great info. I am a micro grower and I want to switch to some Cree CXB's. I...

    Hey Supra! Lots of great info. I am a micro grower and I want to switch to some Cree CXB's. I know these only have a viewing angle of 115 degrees but do you think you could recommend a Cree setup for ONE plant in a box of 1'x1.5'x with one foot of growing height, scrog setup? I realize its not...
  5. alexonfire

    IF you are new to LED and want help choosing what to buy, POST HERE!

    Cool setup, however there are bad reviews for those LEDs online. @JimmyIndica My perpetual dresser setup in 40" wide x 18" long and 30" high with CFLs. I am not using it at the moment. I am just interested in LEDs to minimize as much heat as possible. I need to go more stealth so I need to go...
  6. alexonfire

    IF you are new to LED and want help choosing what to buy, POST HERE!

    Sorry maybe you misread. 12x16x30 is the size of cabinet I want to build, currently 30"x18"x30
  7. alexonfire

    IF you are new to LED and want help choosing what to buy, POST HERE!

    Im glad I found this discussion board, lots of useful info. I have a flowering dresser that I am going to build about 12" wide by 16" long and 30" height inside. Minus the carbon filter and pot I'm looking at about 16-18" of plant height. I currently grow with 6 x 36w PLL CFLs in a 30"x18"x30...
  8. alexonfire

    Micro-grow box configuration

    And how far would you have to keep the LEDs from the canopy?
  9. alexonfire

    Micro-grow box configuration

    How many Vero LEDs would you get for that space and what kind of driver?
  10. alexonfire

    how often do you flush in DWC???

    I like to put straight water into the buckets 10 days before harvest to flush them. At this time I pour a gallon of water through the hydroton from the top to try and wash out any salt buildup. Also scrub your buckets at this time to get out any salt and grudge so your roots are just getting...
  11. alexonfire

    Finishing indoor plants already flowering off outside?

    Experiment complete! I ended up putting out 2 sour kush clones after vegging inside for one month and then on 12/12 for 3 weeks before I put them outside. I ended up with 3oz dried after 10 weeks of total flowering time, I could have got more if I left them indoors but I would have had a...
  12. alexonfire

    Finishing indoor plants already flowering off outside?

    My lights are already at 12/12 for 2 weeks so they are starting to bud. I know what you mean with vegging for a long time you will see a couple pistils too in the upper branches. I also live in Canada so there is no way if I put them out Sept 21 they will get hit by frost and bad rain in...
  13. alexonfire

    Finishing indoor plants already flowering off outside?

    Thanks for the replies. I dont think they will re-veg if I throw them outside first week of August because other years Ive grown they are already starting to show pistils by then if I plant outdoors in June. I am trying to minimize stress by leaving them in the 3 gallon buckets and I will...
  14. alexonfire

    Finishing indoor plants already flowering off outside?

    I have 2 Sour Kush Clones that are in soil and I have them vegged for 2 weeks and am now finished week 1 of flowering. Will I be able to flower to 3 1/2 weeks indoors and then put them outside the first week of August and will they be okay to finish up theoretically in 10 weeks which would be...
  15. alexonfire

    DIY - Micro/Stealth, 150w Cool Tube with Pictures

    Sick setup Where did you get that 150w ballast, cooltube, reflector combo?
  16. alexonfire

    what would you say the earliest you can flower to check male/fem?

    Even if you have a plant 12/12 from seed you wont see sex for 4 weeks from germination. Thats the males first, females might not show until week 5. Also thats why it never makes sense to have a shorter veg for regular plants from seed because you are just stunting the plants and they wont finish...
  17. alexonfire

    PL-L WH7 3x55W + 1x36W possible?

    Bump... maybe I put this in the wrong thread
  18. alexonfire

    PL-L WH7 3x55W + 1x36W possible?

    My question; Can I run different watt bulbs off the same electronic ballast? For example the Fulham Workhorse 7 (220w total) has 4 positive leads. I know it is possible to run 4x55w PL-Ls on there but it is not recommended. I was wondering if you could run 3x55w and one 36w bulb for a total of...
  19. alexonfire

    How long can a clone live in rockwool?

    I just found my old post. I went through with the experiment last year for my outdoor grow. I was able to keep plants from seed in 1.5" rockwool cubes for 35 days at 12/12 until they showed sex. They were also about 8" tall. Mind you the roots grew out and tried to attach themselves to other...
Top