Search results

All the above items listed, how did you all miss the step before the drying? You know... Flushing. Every item listed will not repair itself but "may" improve slightly. Read up on flushing and I promise you'll fix the problem on your next time & Good Luck

My personal method is to use as much air inside as you wish but don't create a storm. In my world the only way to lower lamp heat is air exchange. Don't let the air sit and get hot and then try to cool it. Move less air into the room and more out the exhaust. Example would be a 130 cfm in & 150...

I've a room with 6.5 Sq ft of floor space with a height of 6". I'm using 3 x 400 watt ceramic metal halide bulbs. Room temp 80 at highest. So I'm OK with it as is. Question: My lights are 36400 lumen's X 3 = 109,200 divided by 6.5 = 16800 lumen's per square foot. Is that too much ? Let it be...

I recently started with 24 W Widow beans and it's turned crazy. The pheno's are all over the place and a type of growth pattern I've never seen before & it's every bean too so it's genetic. Here it is a small grow space but the height / 400 CMH / great set up. My personal experience it very...

I only wish it were as simple as light leak or UV. I came home last evening to find two plants at the door step of death. I have at present 3 plants 2 in Perlite and one that was in Perlite until it showed bad signs so a repot to soiless was in order. The 2 other seemed fine. Well last night was...

I think we're pretty much on the same page. One thing though as I looked very close the Pistols in lesser light have less of an issue. Everything will get a good flush/ water/ light nutes. Just because! Plus I'll lift the light to 18". I do appreicate you both in answering. As they say on the...

I discovered a small light leak at about the same time I see a plant issue. MY temps are high 70* 35/40 RH. 400 Watt CMH going barefoot.The plants have a light spacing of about 12/14 inches. Also my first grow with CMH. Proper PH & PPM. 4 weeks into flower with 3 WW with many smallish buds but...

I've already made that move. I've never seen this issue before but I may not have been paying that much attention. I forgot to mention that I've done some foliar spray with Hygrozyme and House & Garden Magic Green. Both of which are recommended to use in this manner. H&G is spaced at every...

Daniel & all Else that know anything about CMH. Help!!! I discovered a small light leak at about the same time I see a plant issue. MY temps are high 70* 35/40 RH. 400 Watt CMH going barefoot.The plants have a light spacing of about 12/14 inches. Also my first grow with CMH. Proper PH & PPM...

I've read a couple time's of late that the old green light does well with the herb but the Trichs don't like it..

I'm following your journals like a little puppy but I don't pee on the floor. Well at my age I may be and just don't know it. Great Idea!! I've had this one running around my head sense the early 70's. One thing and it's the issue that stumped me and that is how to figure the rotation of the...

In my reading it sounds as though you've had to raise your light due to heat? I'll have to do a rerun on your new journal. But with my 400W my plants grow to within mear inches of the light. I will say I've made use of air movement. My space is 48 cu. ft.my room in never more than 7 degrees from...

This is getting good now. I'm glad there will be folks to bounce ?'s off of. I started my 400 a few weeks back and haven't looked back in any degree. I MHO two of these will do you better job than a 1000 HPS/MH I know the light is for my plants but as the care taker I like it too. It's color is...

http://www.growlightexpress.com/pages/ceramic-metal-halide-pv-c0-2.html I saw you question the Ceramic Metal Halide. My grow room is 20"X 48"x 5.5". I use a CMH but it's 1000W with 2 120 x 120 PC fans top & bottom. Plus two inside fans for air movement. I've hung a digi terminator 4" inches...

I grew for many years. I'm back and in my frist grow (again) at 67 yo. I had to do some research and sold myselt on the 400W. I actually started with HSP. It came with a used unit. Now after my purchase I can clearly see better growth and even lower temps than dreamed of. This CMR club should...

Tell me are you using the CMH in your refer project? Haven't been to check up in some time. Maybe right now is a good time. Thanks for the link.

I really don't understand all the mess about temp. Save all expense of further experimenting on how to cure. As I once mentioned try using a "Ceramic Metal Halide 400W. I've 1 in my grow space my heat issue has gone. Reading temp from 8" below my bulb is 80* even , my plants are with in a 10"...

You can clone any part as long as it has leafs. Read up on cloning first and find the one you think will bring you best results. I keep trying just keep killing . It's not the method I'm using that's the problem. I would wait too long as then you have too much veg and have to cut it into...

JSGamber, I see you've many friends here and I too have followed this from time to time. In my humble opinion someone (including me) should have given you this below advice. Please do your self a favor. Stop the heat issues and also use a MUCH better light. One with more wattage or the same and...

Here is a quick explanation. http://www.hygrozyme.net/ I use it every time I feed which is about every other time they receive water. That is from the third node to chop. Reality is people grew great bud long before the product and are still doing it without the product. I perfer to look at it...