100% LED GROW IN PLACE!

ASMALLVOICE

Well-Known Member
Awesome Indeed :clap: :clap: :clap:

I love the automation, yes I do. :mrgreen:

Many Thanx for the update. :bigjoint:

Peace and Great Grows

Asmallvoice
 

JointOperation

Well-Known Member
beautiful man.. just beautiful..

would u say these LEDS match up to HPS ? and how much cooler is your room then if you were running all hps in those spots lol.
 

JOLLYRODGER

Active Member
beautiful man.. just beautiful..

would u say these LEDS match up to HPS ? and how much cooler is your room then if you were running all hps in those spots lol.
I would say that I am a little further ahead with the LED's., especially in the electric bill. The room temps are not bad I don't run any A/C and I balance the room with outside air intake. I did run C02 for the first 3 weeks of bloom and using the outside air I was still holding 850-900 PPM. The lights cooling fans blow directly down on the plants and they are exhausting about 78 degrees which is what I maintain as my room temps.I found that the slabs are keeping the temps at night/lights off and this seems to help the root mass. The roots are extreme and bright white inside the gro blocks/slabs. I have experienced a few high temps, with the highest ever of 83.9 so I am some what better in the radiant heat. Don't be fooled in to thinking the lights do not create heat. They very much do but as I mentioned they exhaust at around 78 degrees. All in all I am happy with their performance so far. I will be pulling down in 3 weeks or less so we will scale the harvest and know much better. Thanks!!.
 

JointOperation

Well-Known Member
thats the thing. i dont give a fuck about electric.. or heat lol. as much as i do yields.. and seeing what the buds look like.. you know?

lol but i figured id ask.. but in reality.. i dont care.. i just wana know.. LED VS Double Ended 1000w HPS.. lol which one is best for yielding.. i can ad UV to my room.. like a LED.. lol. but im thinking grabbing some double ended ASAP.
 

Mandangleow

Active Member
I would say that I am a little further ahead with the LED's., especially in the electric bill. The room temps are not bad I don't run any A/C and I balance the room with outside air intake. I did run C02 for the first 3 weeks of bloom and using the outside air I was still holding 850-900 PPM. The lights cooling fans blow directly down on the plants and they are exhausting about 78 degrees which is what I maintain as my room temps.I found that the slabs are keeping the temps at night/lights off and this seems to help the root mass. The roots are extreme and bright white inside the gro blocks/slabs. I have experienced a few high temps, with the highest ever of 83.9 so I am some what better in the radiant heat. Don't be fooled in to thinking the lights do not create heat. They very much do but as I mentioned they exhaust at around 78 degrees. All in all I am happy with their performance so far. I will be pulling down in 3 weeks or less so we will scale the harvest and know much better. Thanks!!.
I have a few more questions for you bro. May I ask what other LED brands you tried before finding a sweet spot?

With your Lumigros, what was your veg period, bloom time, average yield per plant, and total yield on the 57 plants?

If I take the plunge on a couple Lumigro 650s this spring, would you be willing to share your light ratio recipes?
 
Last edited:

JOLLYRODGER

Active Member
thats the thing. i dont give a fuck about electric.. or heat lol. as much as i do yields.. and seeing what the buds look like.. you know?

lol but i figured id ask.. but in reality.. i dont care.. i just wana know.. LED VS Double Ended 1000w HPS.. lol which one is best for yielding.. i can ad UV to my room.. like a LED.. lol. but im thinking grabbing some double ended ASAP.
Hey I posted a overall room shot and a few buds. I am loving the LED because I don't have the issues I have in my other building with only street lights. Going to enlarger the other building and going to change out to 102 LED. The electric demand is so low on LED that I am currently running 46 lights (soon to be 48) with a total amp draw of 129-133 amps total building usage. One more benefit I am finding in the LED. Vs the street lights the yield is not only bigger but the plant counts are twice the street lights which is more then double so the return yield smashes the street lights. I am not only hooked I am completely convinced after 2 years of growing I wish I started with LED first.
 

JOLLYRODGER

Active Member
Some times my math no good. I looked up those lights on Amazon and sweet Jesus man, those are up there but I guess results speak for themselves.
So is this your first led grow? Street light? Like hps?
This is my first LED grow. I started 2 years ago with street lights and I am convinced LED works. The amount of amp draw is so much less that I have twice the plants & trays that I could with the same amount of HPS amp draw. Basically it a no brainer almost twice the yield for the same electric bill. I need bigger buildings which is the only issues using the LED.
 

ASMALLVOICE

Well-Known Member
Man,

I sincerely hope you are not diabetic. Walking into that vast amount of sweetness would surely kill you on contact. :P

Stunning M8, stunning indeed. :clap: :bigjoint: :clap:

Thanx a million for the update. :weed:

Peace and Great Grows

Asmallvoice
 

Shwagbag

Well-Known Member
Sensational! Do I see some plants creeping into some lights? lol

I thought you might be pushing that veg a big :p

Great job, I'm looking forward to seeing this finish!

BTW, have you ever considered a light mover for each table? I haven't seen many commercial grows with LED's, but I'm surprised people aren't giving them a try considering it can add even more savings in operating costs for a large scale commercial grow.
 
Last edited:

JOLLYRODGER

Active Member
Man,

I sincerely hope you are not diabetic. Walking into that vast amount of sweetness would surely kill you on contact. :P

Stunning M8, stunning indeed. :clap: :bigjoint: :clap:

Thanx a million for the update. :weed:

Peace and Great Grows

Asmallvoice
Hey there, amazing you brought that up. I am a Diabetic and I have retinopathy and neuropathy caused by diabetes. I was declared legally blind in 2001. I was given 1-2 years of life remaining in the spring of 2010. I have been working at this project in hopes of helping others. My vision is a large variable and the brightness of the lights is not even a factor for me. Thanks for the interest.
 

JOLLYRODGER

Active Member
Sensational! Do I see some plants creeping into some lights? lol

I thought you might be pushing that veg a big :p

Great job, I'm looking forward to seeing this finish!

BTW, have you ever considered a light mover for each table? I haven't seen many commercial grows with LED's, but I'm surprised people aren't giving them a try considering it can add even more savings in operating costs for a large scale commercial grow.
Yes you have a very keen eye. The kryptonite is pushing out of the house. I was going to use hedge trimmers and whack them straight off. I really dislike the strain. It is one of the sought after strains in the dispensaries so I took on the challenge. I have another grow test location with 4 Lumi's on the tract type light movers and I am trying to conclude if I benefit. I have very small areas that the girls seek a little more sun so I have been testing. Thanx!!!
 

JointOperation

Well-Known Member
can I ask.. how much did you spend on that set up.. 40 lights. at what 500 or more each.. plus everything else.. dammmmmmmmmmmm money money money...

I hope it really does well.. honestly. I hear good things about LEDS.. but then I hear horror stories.

also been hearing that people keep there indoor rooms tooo cold.. compared to what they should be at.. keeping them from getting the best yield there room can produce.
 

JOLLYRODGER

Active Member
I think he said $1099 each earlier.
Shwagbag your are correct about the purchase price of the 650's. The 325's are 599. I just received a special splay 325 at the same price and I really like the different angle it produces. I am using that over a cloner and find a much better coverage.
 

Mandangleow

Active Member
JollyRodger, How did that Durban yield for you? The quality is a given and the electric savings is a major bonus but I'm primarily concerned with yield per light. Call me crazy... Lol.
 
Top