Skizzle
Member
Hello everyone!
I converted a 22 cubic ft upright freezer into a grow box. It's not super stealth but I can lock it and as long as no one pokes around too much, it appears to just be a freezer. Anyway, my whole setup is mounted vertcally, and I'm exhausting it through the bottom via a 6" 435 cfm valuline inline fan and out through my apartment chimney. My cooltube is positioned directly above the inline fan and directly above that I will mount a charcoal filter if I ever get the heat issue licked. I know a 1000w cooltube is a bit much but I got a smoking deal on it and couldn't pass it up, guess it's not such a good deal if I can't use it lol. I would much rather go with a smaller light setup now, because the heat it produces is unreal (which if I manage to beat, I will be using as a heating source in the winter). Not quite ready to give up just yet, so I was wondering if anyone had any ideas as to how I might cool this mofo. If you think this is waaaay overkill, I'll submit.. Intake is coming through a 6" hole on the lower left hand side of the freezer (wall side so it's not immediately visible) and it pulls really hard but the inside temp is still over 100 degrees. I should mention that I live on the 3rd floor and I keep my apt set at 80 degrees because my ac runs nonstop if I set it any lower..would buying a portable ac unit and positioning near the intake work? Or should I directly pipe ac through the cooltube? If it can't be done, then I'll just fill the box with cfls or try and trade this for a smaller light system which is probably the best idea.....
Thanks in advance!
I converted a 22 cubic ft upright freezer into a grow box. It's not super stealth but I can lock it and as long as no one pokes around too much, it appears to just be a freezer. Anyway, my whole setup is mounted vertcally, and I'm exhausting it through the bottom via a 6" 435 cfm valuline inline fan and out through my apartment chimney. My cooltube is positioned directly above the inline fan and directly above that I will mount a charcoal filter if I ever get the heat issue licked. I know a 1000w cooltube is a bit much but I got a smoking deal on it and couldn't pass it up, guess it's not such a good deal if I can't use it lol. I would much rather go with a smaller light setup now, because the heat it produces is unreal (which if I manage to beat, I will be using as a heating source in the winter). Not quite ready to give up just yet, so I was wondering if anyone had any ideas as to how I might cool this mofo. If you think this is waaaay overkill, I'll submit.. Intake is coming through a 6" hole on the lower left hand side of the freezer (wall side so it's not immediately visible) and it pulls really hard but the inside temp is still over 100 degrees. I should mention that I live on the 3rd floor and I keep my apt set at 80 degrees because my ac runs nonstop if I set it any lower..would buying a portable ac unit and positioning near the intake work? Or should I directly pipe ac through the cooltube? If it can't be done, then I'll just fill the box with cfls or try and trade this for a smaller light system which is probably the best idea.....
Thanks in advance!