rkymtnman
Well-Known Member
i prefer simple, cheap and sterile. 0.10 grams of HTH pool shock per 10 gallons water=1ppm chlorine=done!
if you move the chiller out of your closet, it will help keeps temps down (if needed)
18 gallon DWC
- Thread starter ARMY_OF_ONE_92Y
- Start date
-
- Tags
- army_of_one_92y
i prefer simple, cheap and sterile. 0.10 grams of HTH pool shock per 10 gallons water=1ppm chlorine=done!
if you move the chiller out of your closet, it will help keeps temps down (if needed)
ARMY_OF_ONE_92Y
Active Member
I don't have a scale to measure out weight. I also don't know how to just add 1 ppm and when I do add it do I have to add more Every other day or only on Rez change? I was looking up on chlorine and i found out about CLEAR REZ... should I just use that recipe?
ARMY_OF_ONE_92Y
Active Member
Sorry for the late post bro but no I've never been to Korea ... I was stuck in Washington where it rains 24/7 1-23INF 3-2sbct 10-13
rkymtnman
Well-Known Member
i used to use a RCBS reloading scale but then i bought a decent pocket digi accurate to 0.01 for like 35 bucks. it's even more accurate than my reloading one was. the 1 ppm is what you get after you add 0.1g to 10 gallons. chlorine is safe for MMJ up to 3ppm so you could triple it to 0.3 g per 10gal. that is what ppm i run at only because i do hempy buckets where the res temp is the grow room temp.
that recipe for clear rez is just to make a stronger stock solution that you add at a certain mL/gal.
i use it at every res change.
rkymtnman
Well-Known Member
all those "reloading" ones are shite. got 10 years out of it though before it quit on me.
noob12345
Well-Known Member
i have a hornady scale but really like their dies and their Customer service is awesome, lifetime guarantee etc, i got a case stuck in one of my dies (not enough lube) and used a Hammer on threaded bar bit to Hammer out the case and bent the rod, called them up and they sent me new one no probs with a load of spare primer pins. Soz i have gone off topic a bit here 
ARMY_OF_ONE_92Y
Active Member
Ok I'll try to add under 3 ppms so I can get the Rez right ... if you measure it how much would it be ? I read that about 1/4 tsp was around the right amount
ARMY_OF_ONE_92Y
Active Member
I have about 12 seed sprouts in rock wool already rooted on stand by if they do die
ARMY_OF_ONE_92Y
Active Member
ARMY_OF_ONE_92Y
Active Member
Ok so I didn't want to keep light blasting my seedling with 600w. So in the mean time this little cfl will help them out...
things I want to get or do
1. Commercial air pump & stones
2. Veg lamp/light (under $150)
3. Convert to RDWC (3x totes or 6x buckets)
4. Grow tent
Here's a quick pic
things I want to get or do
1. Commercial air pump & stones
2. Veg lamp/light (under $150)
3. Convert to RDWC (3x totes or 6x buckets)
4. Grow tent
Here's a quick pic
Attachments
ARMY_OF_ONE_92Y
Active Member
ARMY_OF_ONE_92Y
Active Member
So here we are on our first week... the seedling stage is over and week 1 is live. I've noticed some sort of build up on my net pots and not sure what it is or why it keeps appearing.
ARMY_OF_ONE_92Y
Active Member
ARMY_OF_ONE_92Y
Active Member
ARMY_OF_ONE_92Y
Active Member
I have no idea what it is but i don't want it lol is it residue from the GH 3 part
ARMY_OF_ONE_92Y
Active Member
Don't have a scope and can't really smell it either. I think it's some sort of slime or bacteria
