1mx2mx2 2x600w scrog? Best hydro system?

Designing my grow tent/room its 1m x 2m x 2m in height.
I've got 2 x 80cm parabolic reflectors with 2 x 600w sunmaster super deluxe hps bulbs and Superlume ballasts.
10inch x 1m rhino filter with combi phonic trap ducting and 10inch systemair rvk. Bit over kill?
That's on a smscom all in one controller so should run fan less than half speed to keep noise down I'm hoping except for hum? I'll box fan up?
I'm thinking 4 in 1 row or 8 in 2 rows doing a scrog with either a wilma system wide xl modded with air pots or a diy drip to waste with a flexi tank an pump and some sort of tray an pump for run off in coco in air pots.
Any input and info is much appreciated.
I'm loosing alot of head room with this big filter so thinking last resort put it outside tent with fan attached to filter pushing air into it?

Kevy19 said:

diy drip to waste with a flexi tank an pump and some sort of tray an pump for run off in coco in air pots

Click to expand...

Do you have a floor drain handy?

Kevy19 said:

I'm loosing alot of head room with this big filter so thinking last resort put it outside tent with fan attached to filter pushing air into it?

Click to expand...

Should be just fine. Remember if its a new filter to fire it up the first time outside they usually blow a lot of carbon dust.

If you push through your filter your going to be pumping heat into the same room your growing.
You should be able to manage fine having the filter in the tent and sucking through it, then you can properly duct the heat out of the room.

coreywebster said:

If you push through your filter your going to be pumping heat into the same room your growing.

Click to expand...

I did not think of that.

An inline carbon filter might be the way to go when it's replacement time.

Renfro said:

An inline carbon filter might be the way to go when it's replacement time.

Click to expand...

True. I have never tried one but they seem ideal for some situations.