Toohighmf
Well-Known Member
Yooooooo
Just got everything to run passive for now to get my feet wet. I have a 450g spool and 6x12 collection pot. No dewax.
I aquired some older dry super blue cookie trim, and some older frozen Skywalker OG live stuff
1st batch of the dry netted me a nice yield of some very dark thick bubbly stuff that didn't get introduced to heat for 12 hours. Since then, it has been burped a few times at a constant 90f, but at full vac for the last 3 days, And has stayed 1/4'' thick and full of micro bubbles.
When it came out of the platter, it was already very thick and "dry" like cotton candy or caramel, and started turning very light color with every whip around the platter. After sitting under full vac for 12 hours (because I left the vac pump and heat pad at the lab) it got darker and stayed a muffin the whole time til I could get back to the shop to drop it and raise periodically. I think I pulled too much tane in recovery, as I waited until it was almost completely not bubbling anymore.
The next batch, was the live resin run, and it was super hot outside, and my bro was lagging hard. We melted through most of our dry ice way too fast. I feel like we didn't run cold enough at all, but recovered with a lil more tane left in the pot, as it bubbled when I opened it, but still couldn't get it to "pour" and had to scrape. I got less than half of what I did the previous run.
Based on what you see and read.
Am I correct to say that I recovered too much tane, and that the live resin batch yielded less because of the temps lot being subzero?
Is it my purging technique of accidentally leaving at full vac without heat overnight what caused the microbubbling and darkness?
Someone please help me make good shatter!!
Just got everything to run passive for now to get my feet wet. I have a 450g spool and 6x12 collection pot. No dewax.
I aquired some older dry super blue cookie trim, and some older frozen Skywalker OG live stuff
1st batch of the dry netted me a nice yield of some very dark thick bubbly stuff that didn't get introduced to heat for 12 hours. Since then, it has been burped a few times at a constant 90f, but at full vac for the last 3 days, And has stayed 1/4'' thick and full of micro bubbles.
When it came out of the platter, it was already very thick and "dry" like cotton candy or caramel, and started turning very light color with every whip around the platter. After sitting under full vac for 12 hours (because I left the vac pump and heat pad at the lab) it got darker and stayed a muffin the whole time til I could get back to the shop to drop it and raise periodically. I think I pulled too much tane in recovery, as I waited until it was almost completely not bubbling anymore.
The next batch, was the live resin run, and it was super hot outside, and my bro was lagging hard. We melted through most of our dry ice way too fast. I feel like we didn't run cold enough at all, but recovered with a lil more tane left in the pot, as it bubbled when I opened it, but still couldn't get it to "pour" and had to scrape. I got less than half of what I did the previous run.
Based on what you see and read.
Am I correct to say that I recovered too much tane, and that the live resin batch yielded less because of the temps lot being subzero?
Is it my purging technique of accidentally leaving at full vac without heat overnight what caused the microbubbling and darkness?
Someone please help me make good shatter!!