rkymtnman
Well-Known Member
hire an electrician.I just don't know the technical way of splitting the power
hire an electrician.I just don't know the technical way of splitting the power
Thank god for googleOr maybe I overthinking it and something like this would work? https://www.homedepot.com/p/Champio...240-Volt-Generator-Power-Cord-48033/204359147
Yes that cord splits to 110 outlets. It would work fine. A shorter one will be cheaperOr maybe I overthinking it and something like this would work? https://www.homedepot.com/p/Champio...240-Volt-Generator-Power-Cord-48033/204359147
At 240v 25' is a short distance, and not subject to very much voltage drop.Ohm's law. Voltage = current x resistance.
You'll suffer noticeable voltage drop after 200 foot of extension cord!
Way too long unless its very heavy gauge. 20 amp lead?
He said 200 feetAt 240v 25' is a short distance, and not subject to very much voltage drop.
Yes, and you usually pay by the amp, so half the cost. I meant efficient in dollars, yes the wattage is the same.
We actually pay by the Kwh so the price will be the same whether its 240 or 120v
220/240 is more efficient for most ballast and LED drivers. But the difference is 1-2%.
watt= volts x amps
@240V
1000W= 240x amps
Amps= 4.16a
@120
1000W= 120 x amps
Amps= 8.333amps
in both cases 1000W were used and electrical companies charge by the kilowatt hour not by the amps. The only benefit you get is that lights run slightly more efficient on 240V and that you can run smaller wiring at 240V because of running half the amps.
My veg room is all 120V.
my Flower room is 220V for all lights. And 120V for fans and dehumidifier. 120 and 220 alternating outlets. All the 220 outlets are switched from a relay for timing.
View attachment 5073106