250 Watt MH Grow with *PICS*

howak47

Well-Known Member
hey man can u use one of those 70watt hps in a reguler cfl socket(lamp) or do u need something special?
 

tom__420

Well-Known Member
They fit in a regular light socket but the bulb will not be powered on, it need a ballast to work. Go check out lowe's or home depot and you should be able to find an all in one unit
 

tom__420

Well-Known Member
Alright guys so I have been looking into ebb and flow... I have been searching the internet trying to piece together the perfect diy system for my flowering chamber. Here are the parts that I want to get:

This 23 gallon mortar tub from lowe's as the tray: http://www.lowes.com/lowes/lkn?action=productDetail&productId=19252-1569-ST3608


This water pump: http://htgsupply.com/viewproduct.asp?productID=50425


This fill and drain kit for... well you can guess: http://htgsupply.com/viewproduct.asp?productID=50633


However many of these square pots to fill the tray: http://www.wormsway.com/detail.aspx?t=prod&sku=SWP306&AC=1

I will only need the tubing and a rubbermaid tote as a rez and I should be set. Does anyone have any suggestions or input? This is a while down the road I would just like to know what I want to do and not change my design 5 times as I am building it.
 

howak47

Well-Known Member
They fit in a regular light socket but the bulb will not be powered on, it need a ballast to work. Go check out lowe's or home depot and you should be able to find an all in one unit
how much do they cost?thanks for the info!!
 

KiloBit

Well-Known Member
Alright guys so I have been looking into ebb and flow... I have been searching the internet trying to piece together the perfect diy system for my flowering chamber. Here are the parts that I want to get:

This 23 gallon mortar tub from lowe's as the tray: http://www.lowes.com/lowes/lkn?action=productDetail&productId=19252-1569-ST3608


This water pump: http://htgsupply.com/viewproduct.asp?productID=50425


This fill and drain kit for... well you can guess: http://htgsupply.com/viewproduct.asp?productID=50633


However many of these square pots to fill the tray: http://www.wormsway.com/detail.aspx?t=prod&sku=SWP306&AC=1

I will only need the tubing and a rubbermaid tote as a rez and I should be set. Does anyone have any suggestions or input? This is a while down the road I would just like to know what I want to do and not change my design 5 times as I am building it.
great detail tom me boy.....that pump is good, I've used it in my original....I'll be following along....:joint:
 

jigfresh

Well-Known Member
Tom... I've never done ebb n flow, but that looks like a good set up so far. I use 6 inch net pots in my Dwc, and am always thinking 'why would anyone need 6 inch net pots'. I guess if you use big old hunking rockwool cubes for each plant, but I don't see any purpose for anything bigger than 5 inches. I think I could have gotten away with 3 inchers.

I like the forward looing to the next setup.
 

Doobieus

Well-Known Member
Alright guys so I have been looking into ebb and flow... I have been searching the internet trying to piece together the perfect diy system for my flowering chamber. Here are the parts that I want to get:

This 23 gallon mortar tub from lowe's as the tray: http://www.lowes.com/lowes/lkn?action=productDetail&productId=19252-1569-ST3608


This water pump: http://htgsupply.com/viewproduct.asp?productID=50425


This fill and drain kit for... well you can guess: http://htgsupply.com/viewproduct.asp?productID=50633


However many of these square pots to fill the tray: http://www.wormsway.com/detail.aspx?t=prod&sku=SWP306&AC=1

I will only need the tubing and a rubbermaid tote as a rez and I should be set. Does anyone have any suggestions or input? This is a while down the road I would just like to know what I want to do and not change my design 5 times as I am building it.
Make sure the drain part, drains back to the res, but I'm sure you know that already lol.
 

tom__420

Well-Known Member
What's up everyone, been a while since I posted. Today marked 68 days flowering for the Church and she has been harvested. Couldn't get many pics kinda busy but will def get more once she dries out a little more. The T.S,S. is at 12 weeks and 7 days into flowering and she is still going strong. The buds are really adding on some weight now. I took her out from the 70 watt HPS and put her under the 250 watt for the last few weeks since the Church is gone. She is fox tailing a little bit but I am not too worried. Here's the pics of the t.s.s.-









The Church buds-





Let me know what you all think :joint::peace:
 

Attachments

lilmafia513

Well-Known Member
that church looks good tom, almost had my hands on a few clones of the church...then the op got shut down. The church seeds are on my wish list on attitude.
 
Top