4"AC Infinity

B

BrianBuds

Member
Upgraded to AC Infinity 4" and I gotta say I'm very impressed with the noise reduction.
Temp control Module is very easy to use and spot on.
Anyone have one and if so what's your thoughts?
 

Attachments

  • 20210927_183424.jpg
    20210927_183424.jpg
    2.2 MB · Views: 22
  • 20210927_170904.jpg
    20210927_170904.jpg
    1.5 MB · Views: 23
  • 20210929_085754.jpg
    20210929_085754.jpg
    3.2 MB · Views: 22
Bought one recently. I love the temp/RH meter and the speed settings. At night I just set it on 1 so I can sleep and it works perfectly
 
I have a T6 and also an S6. I only wish they'd make a controller that you can plug two fans into and have different fan speeds for each. Would be way easier if you have a setup with both intake and exhaust. Currently the controller allows two fans but they both have the same speed setting.
 
LeastExpectedGrower said:
I have a T6 and also an S6. I only wish they'd make a controller that you can plug two fans into and have different fan speeds for each. Would be way easier if you have a setup with both intake and exhaust. Currently the controller allows two fans but they both have the same speed setting.
Click to expand...
I'd just restrict one a little.
 
1212ham said:
I'd just restrict one a little.
Click to expand...

Honestly needs more than 'a little' to match correctly. My exhaust already has ducting & a filter the intake probably needs to be run at less than 50% of what the exhaust is doing. For instance, the correct balance with filter on the outtake is outtake set for 8, intake set for 3, outtake set for 10, intake set for 4, etc.

Of course a better fit might be the exhaust fan being a 6" and the intake being 4" or less.
 
LeastExpectedGrower said:
Honestly needs more than 'a little' to match correctly. My exhaust already has ducting & a filter the intake probably needs to be run at less than 50% of what the exhaust is doing. For instance, the correct balance with filter on the outtake is outtake set for 8, intake set for 3, outtake set for 10, intake set for 4, etc.

Of course a better fit might be the exhaust fan being a 6" and the intake being 4" or less.
Click to expand...
Silly me, I overlooked the exhaust being restricted by the filter. :roll:
The 6" is 402 CFM and the 4" is 205 CFM. Staic pressure for the 6" is 503 pa and the 4" is 22.7 MM-H2O, converts to 222.6 Pa.
 
You must log in or register to reply here.
Back
Top