!

Kingrow1

Well-Known Member
Nitrogen (N)


Why do plants need Nitrogen?
Protein is essential for all living organisms, and is required for growth and development. Nitrogen is one of
the main elements in protein. Nitrogen is also a component of nucleic acid, DNA, RNA, genes,
chromosomes, enzymes, chlorophyll, secondary metabolites (alkaloids), and amino acids. Nitrogen
accounts for about 1 to 6 % of plant dry matter, depending on the species.
What happens when Nitrogen is not available to plants?
Nitrogen deficiency slows down the growth and development of plants. The plants appear stunted with
light green lower leaves, while the upper leaves remain green. With prolonged N deficiency, yellowing
(chlorosis) of older or lower leaves occurs. This is followed by leaf tip death and leaf margins developing a
brown discoloration (necrosis). In some instances the leaves fall off. The plant stems become woody.
Source of Nitrogen Fertilizers
NAME RATE COMMENTS


Ammonium Nitrate
200 – 300 ppm Single N (33%) source; lowers substrate pH
Ammonium Sulfate


200 – 300 ppm Excellent source of N (21%) and S (24%)
Ammonium Chloride


200 – 300 ppm Source of N (25 %) and Cl-(66%);
high concentration may cause foliar injury
Potassium Nitrate


200 – 300 ppm Source of N (13%) and K (44%)
Monoammonium Phosphate


200 – 300 ppm Source of N (10%) and P (50-52%)
Diammonium Phosphate


200 – 300 ppm Source of N (19%) and P (46-53%)
Urea


200 – 300 ppm Single source of N (45%);
cheap, but will lower substrate pH
Calcium Nitrate


200 – 300 ppm Source of N (15%) and Ca (22%);
will increase the substrate pH

Phosphorous (P)


Why do plants need Phosphorous?
Phosphorus provides energy in the form of ATP and NADPH for plant metabolism (photosynthesis and
respiration). Additionally, it is a component of DNA, RNA, nucleotides and cell membrane.
What happens when Phosphorous is not available to plants?
Initially, plants appear darker green with reduced growth affecting the leaf size and stem thickness. As the
deficiency continues, the older, lower leaves develop irregular spots of brown to dark brown dead tissue. In
some plants, reddish to purple pigmentation may appear on the under or upper surface of leaf margins,
lower leaves, and stems. Eventually, leaf death of older leaves may occur. In most cases, lack of
phosphorus delays flowering in plants.
Source of Phosphorous Fertilizers
NAME RATE COMMENTS
Monoammonium Phosphate


30 ppm Source of N (10%) and P (50-52%)
Diammonium Phospate


30 ppm Source of N (19%) and P (46-53%)
Monobasicpotassium phosphate


30 ppm P (23%) K (28%)
Dibasicpotassium phosphate


30 ppm P (18%) K (45%)
Phosphoric acid 10 ppm Single P source (P2O5 -54%)

Potassium (K)


Why do plants need Potassium?
Unlike nitrogen and phosphorus, potassium is not a component of plant organic matter. Potassium is
important for movement of sugars, starch formation, pH stabilization, drought tolerance, cell turgor,
enzyme activation, and regulation of stomata opening and closing.
What happens when Potassium is not available to plants?
The leaves of potassium deficient plants are small and dark green. The plants have short internodes
resulting in compact plant appearance. These symptoms are followed by a sudden development of irregular
necrotic tissues along the leaf margins and tips of lower, older leaves and eventually covering whole
leaves, making the leaves appear scorched. Also, leaves curl downwards.
Source of Potassium Fertilizers
NAME RATE COMMENTS
Potassium chloride


200 ppm Source of K (60%) and Cl
Potassium nitrate


200 ppm Source of K (44%) and N (13%)
Potassium sulfate


100 ppm Source of K (50%) and S (18%)
Potassium hydroxide


50 ppm Single source of K (75%)
Potassium thiosulfate


200 ppm Source of K (25%) and S (17%)
Monobasic potassium phosphate


200 ppm Source of K (28%) and P (23%)
Dibasic potassium phosphate 100 ppm Source of K (45%) and P (18%)

Calcium (Ca)


Why do plants need Calcium?
Calcium is required for cell wall structure and cellular signaling. Calcium is important in cell division, cell
expansion, building of cell walls, stomatal regulation, and cold tolerance.
What happens when Calcium is not available to plants?
Unlike other nutrients, lack of calcium generally affects the growing points and young leaves of the plants.
The young leaves are often twisted or wrinkled. The growth is reduced with tiny black spots appearing
around the mid-leaf area of young leaves and on the tips of very young leaves. In some cases, these black
spots appear on the growing points. Abortion of flowers or flower buds is common if calcium is unavailable
during flowering. During fruiting, lack of calcium can result in fruit cracking, water soaked tissues or
blossom end rot (tomato).
Source of Calcium Fertilizers
NAME RATE COMMENTS
Calcium nitrate


200 ppm Calcium source 22%
Calcium chloride


200 ppm Calcium source 36%
Calcitic limestone


3 g per liter
of substrate Calcium source 32%
Dolomitic limestone


3 g per liter
of substrate Calcium source 22%
Hydrated lime


1.5 g per liter
of substrate Calcium source 46%
Gypsum


3 g per liter
of substrate Calcium source 23%

Magnesium (Mg)


Why do plants need magnesium?
Magnesium is a core component of chlorophyll (pigment of photosynthesis). Magnesium is also important
in enzyme and cofactor reactions. It is involved in the metabolism and movement of carbohydrates and
stabilizing cell membranes.
What happens when magnesium is not available to plants?
Normally magnesium deficiency symptoms appear in lower, older leaves with chlorosis of greenish yellow
to yellowish green developing along the leaf margins and tips, which progresses inward between the leaf
veins. As the deficiency prolongs, necrosis develops between the veins and the leaves curl downwards.
Eventually, leaf and plant death may occur if the magnesium deficiency continues.
Source of magnesium Fertilizers
NAME RATE COMMENTS
Magnesium nitrate


50 ppm Magnesium source 9%
Magnesium sulfate


50 ppm Magnesium source 10%
Magnesium chloride


50 ppm Magnesium source 25%
Potassium magnesium sulfate


25ppm Magnesium source 11%
Dolomite


3 g per liter Magnesium source 8-20%
Magnesium oxide 1 g per liter Magnesium source 50-55%



 

Kingrow1

Well-Known Member
Sulfur (S)


Why do plants need sulfur?
Sulfur is essential in protein synthesis since it is a constituent of some essential amino acids such as cystine
and methionine. Sulfur is also involved in plant photosynthesis and respiration.
What happens when sulfur is not available to plants?
Initially, uniform chlorosis of light greenish yellow pigmentation develops anywhere between the young
and mature leaves, but rarely on lower, older leaves. As the symptoms advance, uniform chlorosis spreads
to the rest of the leaf area.
Source of sulfur Fertilizers
NAME RATE COMMENTS


Ammonium sulfate
60 ppm Sulfur source 24%
Potassium sulfate


60 ppm Sulfur source 18%
Magnesium sulfate


60ppm Sulfur source 13%
Calcium sulfate


3 g per liter
of substrate Sulfur source 18%
Sulfuric acid


30 ppm Sulfur source 33%
Elemental Sulfur


1.5 g per
of substrate Sulfur source 30-99%
Potassium thiosulfate 30 ppm Sulfur source 17%

Iron (Fe)


Why do plants need iron?
Iron is an important component of heme and sulfur proteins. DNA and RNA synthesis is restricted under
iron deficient environment. Iron is also involved in chlorophyll formation. Iron is considered an immobile
element in the plant, and as a result, iron deficiency symptoms develop on young leaves and shoots.
What happens when iron is not available to plants?
Generally young leaves develop interveinal chlorosis, from the base, but in some species from the tip. Over
time, interveinal chlorosis intensifies and the pattern becomes less interveinal. Even the stems appear
chlorotic. At this point, the chlorotic symptoms are irreversible even if correctional measures are taken.
Eventually, yellow gives way to white. The bioavailability of Fe is pH dependent; the lower the pH, the
higher the solubility and hence the availability of iron to plants.
Source of iron Fertilizers
NAME RATE COMMENTS
Fe - EDTA


4 ppm Iron source 9-12%
Fe - DTPA


4 ppm Iron source 10%
Fe - EDDHA


4 ppm Iron source 6%
Fe - HEDTA


4 ppm Iron source 5-9%
Iron sulfate


4 ppm Iron source 20%
Ferrous ammonium sulfate 4 ppm Iron source 14%



 

Kingrow1

Well-Known Member
Manganese (Mn)


Why do plants need manganese?
Manganese plays a significant role in photosynthesis. The formation of free oxygen radicals during water
splitting and ultimately the release of oxygen is not possible under Mn-free environments. Mn is the only
element that can contribute the necessary electrons for this biochemical process.
What happens when manganese is not available to plants?
The young and recently matured leaves develop chlorosis followed by stippling of necrosis on recently
matured leaves. Drastic reduction of shoot and root growth is common. Flowering is strongly inhibited.
Environmental factors such as sunny summer months, greenhouses built close to traffic areas and
ozonated water used in irrigation/fertigation may contribute to manganese deficiency.
Source of manganese Fertilizers
NAME RATE COMMENTS

Manganese chloride

10 ppm Manganese source 58%

Manganese sulfate



20 ppm Manganese source 24%

Manganese EDTA

30 ppm Manganese source 9-12%


Copper (Cu)



Why do plants need copper?


Copper plays an important role in quenching the radicals produced during biochemical processes. It is also
a component of proteins and enzymes that are critical in producing ATP the “Biological Currency’. Copper
is required for lignification, especially xylem formation, and its mobility is moderate to immobile within the
plant.
What happens when copper is not available to plants?
Initially, the young and maturing leaves appear stunted. In some species a tinge of bluish-green appears,
especially over the veins. This is followed by impaired flower development that includes reduced size,
premature abscission, or abortion. Sudden death of tissue, with symptoms similar to localized tissue
dehydration, develops on recently mature leaves as a result of poor xylem tissue development. Chlorosis is
generally not a distinguishing feature. Substrate with high pH or alkaline water may contribute to Cu
deficiency. Symptoms appear initially at the base of the leaf and spread toward the margins.
Source of copper Fertilizers
NAME RATE COMMENTS
Copper EDTA




15 ppm Copper source 9-13%

Copper HEDTA


15 ppm Copper source 9%

Copper chloride


6 ppm Copper source 47%

Copper sulfate monohydrate


7 ppm Copper source 35%

Copper sulfate pentahydrate


9 ppm Copper source 25%

Cuprous oxide

3 ppm Copper source 89%


Zinc (Zn)



Why do plants need zinc?


Zinc is an integral component of protein; so far, over 80 zinc-containing proteins have been reported. One
of them, referred to as ‘Zinc Fingers’, is actively involved in DNA transcription. This means protein synthesis
requires Zinc.
What happens when zinc is not available to plants?
Young and recently matured leaves develop puckering, veinal chlorosis, and necrosis. Some plants develop
purple pigmentation. Shoot and root growth is reduced. A high level of P in the substrate induces Zn
deficiency. Zn availability is reduced by high pH and bicarbonates (HCO
3-).

Source of zinc Fertilizers

NAME RATE COMMENTS
Zinc Sulfate monohydrate




13 ppm Zinc source 36%

Zinc Sulfate heptahydrate


10 ppm Zinc source 21%

Zinc Chloride


13 ppm Zinc source 27%

Zinc nitrate


6 ppm Zinc source 49%

Zinc EDTA


15 ppm Zinc source 9-14%

Zinc HEDTA

15 ppm Zinc source 9%


Boron (B)



Why do plants need boron?


Boron is required in plants for cell division, cell wall formation and stabilization,
lignification, xylem differentiation, membrane integrity, auxin activity, inhibition
of callose formation, nucleic acid metabolism, apical meristem function,
pollination and reproduction, and counteracting the toxic effects of Aluminum.
The critical B concentration varies among species, and B requirement during the
developmental stage is greater than vegetative stage. Almost 90% of plant B is
contained in the cell wall.
What happens when boron is not available to plants?
Like Ca, B disorders develop on the shoot and root meristem, and on young
leaves. The symptoms develop on the roots 3 to 4 days earlier than the shoot.
Overall, the roots are thick and short while primary roots develop thick swollen
root tips with numerous short secondary roots developing close to the tip giving
a “witch’s broom” symptom. Meanwhile, foliage becomes darker and glossy.
Young and recently matured leaves become thick, leathery and brittle with
severe distortions. Loss of apical dominance is a common symptom in the root
and shoots. At this point, it is too late to take any correctional measures.
Source of boron Fertilizers
NAME RATE COMMENTS
Boric acid




6 ppm Boron source 18%

Borax


6 ppm Boron source 15%

Solubor

6 ppm Boron source 15%


Molybdenum (Mo)



Why do plants need molybdenum?


The requirement of Molybdenum for healthy plant is only 0.1 ppm in the form of Mo(VI) and is available
only at high pH (> 6.0. It is involved in the initial step of inorganic nitrate (NO3) assimilation.
Therefore, Mo is critical when nitrate is supplied rather than ammoniacal (NH4- N) N. It is important in the

biosynthesis of the phytohormone abscisic acid, which is required in drought conditions.


What happens when molybdenum is not available to plants?
Generally, the symptoms appear on the middle and older leaves with interveinal mottling and marginal
chlorosis. Eventually, the symptoms progress to upward curling and necrosis of leaf margins. The


symptoms are accentuated whenever nitrate-nitrogen (NO
3-N) is the sole source of N, and under such
conditions, the symptoms of Mo deficiency are similar to N deficiency.



Source of molybdenum Fertilizers
NAME RATE COMMENTS
Ammonium molybdate




0.7 ppm Molybdenum source 54%

Sodium molybdate


0.7 ppm Molybdenum source 39%

Molybdic acid

0.7 ppm Molybdenum source 53%


 

Mr.Grønn

New Member
Nice info, thanks. (Even if similar info is all over).

However, since there are so many growers on these forums, and since so many experience problems, I wish the mods would set up a "solution-worked-for-this-problem" forum - this way we could get pictures and info on sick plants, along with a CONFIRMED solution on how to fix that problem.

This way, a big database will get available, with every problem under the sun having a solution available (eventually).

OK, I might be naive :-)
But it should be possible, as long as only fixed problems with full history are allowed posted in that forum. And it would have to be very detailed (both problem and solution) - as a lot of similar looking problems are not - and therefore have different solutions.

I mean, descriptions of defs are nice, suggestions to solutions are nice, but imagine a database with solutions to particular problems...
Just a stoner thought, ignore if it was dumb :-\
 

Kingrow1

Well-Known Member
Mr.Grønn;6123507 said:
Nice info, thanks. (Even if similar info is all over).

However, since there are so many growers on these forums, and since so many experience problems, I wish the mods would set up a "solution-worked-for-this-problem" forum - this way we could get pictures and info on sick plants, along with a CONFIRMED solution on how to fix that problem.

This way, a big database will get available, with every problem under the sun having a solution available (eventually).

OK, I might be naive :-)
But it should be possible, as long as only fixed problems with full history are allowed posted in that forum. And it would have to be very detailed (both problem and solution) - as a lot of similar looking problems are not - and therefore have different solutions.

I mean, descriptions of defs are nice, suggestions to solutions are nice, but imagine a database with solutions to particular problems...
Just a stoner thought, ignore if it was dumb :-\
Just bored so thought id copy paste a random thread, there were pics but they werent easy to copy so they got left out.

Yer dude i been calling for better stickies but no one really seems able to do a killer plant deficiency thread to identify deficiencies, cures and other situations. Mods like they aint got the time, but i seen some of their threads and plants and editing etc etc and theses guys could do it if they wanted to. Would be a good thing for Rollitup to have as all other plant deficiency charts bum me out cause there unworkable and crap, i could diagnose Nitrogen deficiency of one of them charts and im buggered if i know what the rest mean! Peace
 
Top