60 Plant Grow Setup
- Thread starter trenton
- Start date
vespa17
Well-Known Member
trenton, hopefully some of the more experienced growers will back me up on this but I can speak from experience and say the following: I had a similar experience in my tiny 6 plant grow with the humidity going way too high and powdery mildew forming very quickly. I read some posts on here and prepared a hydrogen peroxide/water mix by mixing about 2 tablespoons 3% H2O2 with a gallon of water and I sprayed it all over the leaves and roots. My intent was to use that as a quick fix and then head to the hydro store the next day for some stronger stuff. However the spray did the trick in less than 24 hours and I never needed to buy anything else. I wasn't in flower but I think H2O2 has gotta be relatively safe during flower in low doses - safer than a pesticide or mold spray anyway. Like I said, I hope some of the big guns on here back me up.
Keep up the good work on the grow and good luck!
Keep up the good work on the grow and good luck!
i've been saying this for 2 months and no one will listen. HYDROGEN PEROXIDE. i killed mildew on buds the day before harvest. it works immediately. it even kills bugs. but what do i know?
abudsmoker
Well-Known Member
i havent had mold myself other than bud rot, however i do know that sulfer kills by changing the leaf ph so the mold cant survive. that is a devistating set back, what is the result of ignoring this, Bud rot? how many more weeks are the plants needing still ? ????
dankforall
New Member
I would try this if you have not already fixed the problem. Also the drain for the dehumidfiers is a good idea!i've been saying this for 2 months and no one will listen. HYDROGEN PEROXIDE. i killed mildew on buds the day before harvest. it works immediately. it even kills bugs. but what do i know?
User24
Well-Known Member
i think in future grows of this scale, you will want to invest in some automation, I have read of grows that are run with a growtronix system, which monitors pretty much all your variables, and can react to situations (like high humidity, or de-humidifiers with full tanks) by automating pumping, ventilation, and even alerting you on your cell phone when things arent within parameters.
seems like with that many plants it is a real hassle to keep conditions optimal, without someone or something monitoring it all the time.
growtronix.com will have all the info you need.
seems like with that many plants it is a real hassle to keep conditions optimal, without someone or something monitoring it all the time.
growtronix.com will have all the info you need.
vespa17
Well-Known Member
I listened, Fdd! I should have said in my previous post that I read about using H2O2 from one of your posts. Now I just sound like I am sucking up.i've been saying this for 2 months and no one will listen. HYDROGEN PEROXIDE. i killed mildew on buds the day before harvest. it works immediately. it even kills bugs. but what do i know?
Give it a try Trenton, the big gun has spoken!
trenton
Well-Known Member
Thanks for all the advice guys. I owe you all a ton of pics and they will come soon. I am busy putting 5 foot bamboo sticks into the pots and tyeing all the colas up towards it so they wont droop. They wont damage the roots will they? Also does anyone have a link to the bio soy product.
User24
Well-Known Member
His original goal was 6lbs, but that was with only 4 lights, he will probably yield more than that since he is now running 6 lights, as long as he keeps the pest and mold away for the next 4-5 weeks.
several growers here at riu have reported outputs from 2-5oz per plant of course the 2-3oz range is the most common.
6 lbs would only be 1.8oz per plant on the 60 ladies, its a nice conservative estimate imo.
several growers here at riu have reported outputs from 2-5oz per plant of course the 2-3oz range is the most common.
6 lbs would only be 1.8oz per plant on the 60 ladies, its a nice conservative estimate imo.
abudsmoker
Well-Known Member
i dont have this crap, i think most of these systems are a waste of money.
please dont list hardware i dont have or use. thanks.....
i have the best when it comes to cameras and security, when it comes to automation, there is no substitute for the human element
philli007
Active Member
Haven't checked in for a while and just catching up... great to hear the good news!
P007
trenton
Well-Known Member
I ran the sulfur burner today for another 3.5 hours. I have noticed that the majority of the mold is on the plants in the corner closest to the intake fan which draws cold air in from the outside. I have a hepa filter on the intake however it appears that it could use a new one. The weather here is currently crappy and rainy so I am sure the humidity is way high outside. The light are off in the room now. Current temp is at 68/F and humidity is at 47% with 2 50 pint dehumidifiers running at full speed. Do you think that turning the intake fan off suring dark hours is a good idea and will keep the room less humid??? I have a 12 exhaust fan and 4 oscallating fans in the room. Thanks.
Similar threads
