A proper full melt dry sift tutorial. This time the right way.

M

MnH

Well-Known Member
Frenchy Cannoli said:
You actually made me laugh on that one. You have a wonderful and unique technique that I really do not care to to replicate, I just want to lab test different techniques which is something that has not been done, nothing more!
You really do not get it so can we keep it at that and would you just forget about me.
Click to expand...
Are you ever going to explain to everyone on the internet why all was good a few days ago, and then after the weekend you decided to go slightly insane and claim that I cut in line and was causing a disturbance at your booth, which of course couldn't be any further from the truth?

Sounds to me like you made up some bs story so you could back out without looking like a scared little kid who is afraid to have his ass handed to him.. you made the challenge and set it up, told me the timeline was on me, then offered to bring trim and product, then for no reason whatsoever you back out and start claiming you want nothing to do with me?? LOL.

Makes sense.

You've also claimed that myself, Sam, Ester, and others *could not* tell the difference between dry sift and ice wax blind testing.. which is of course, absolutely hysterical lol..

You claim "only a lab can tell the difference".. have you done said testing? Or is this just another one of your scientific bits you have not tested yet claim as facts?

Is this the same as you being able to make dry sift just as clean as me, but can't prove it? Not one single picture? Never used a loupe? A scope? NEVER in all your years have you checked out the microscopic contaminant content in your sift, yet you are making claims like you've done it hundreds and thousands of times?

You preach 'science' over on ICM and you have done the LEAST amount of actual science of just about anyone on that site. You clearly have become angry because you got slapped around at every turn when Sam had to straighten you out on multiple subjects which have been covered over there dozens of times.

What about claiming I cut in line at your booth, but on another forum claiming you didn't recognize me and had no idea who I was? Is this just another in a long list of Frenchyisms that you say yet have absolutely zero proof or evidence of, and are even making things up because you've clearly run into a road block you don't wanna jump over? Easier to turn around instead of going through with all the shit you talked about challenging me.. now you don't care haha.

I get it though, easier to work with other hash makers who you haven't challenged/backed out on. I can't imagine with an ego the size of yours, you'd enjoy having to admit that a kid blew your shit out of the water and did it in a fraction of the time without carding or refining. B.man certainly is out there telling people about some 'magical' method that uses quarters (lol) to separate the screens and you don't have to card etc.. guess whose method that is, turbo?

It's getting ridiculous and if you're laughing i'm glad, because if I came off looking that stupid on multiple internet forums i'd have to laugh a bit at myself too.
 
Last edited:
Frenchy Cannoli

Frenchy Cannoli

Well-Known Member
The reasons why I do not want anymore to have anything to do with you are simple, you are delusional on a grand scale.
Let me be please!
 
M

MnH

Well-Known Member
Delusional like setting up a challenge then backing out from being skurred?

Or delusional like claiming I cut in line and caused an issue, yet you said you didn't recognize me?

Delusional like that? Making things up in your head to justify your asinine behavior lately?

Or delusional like claiming you can tell purity having never used a microscope or loupe in your life?

These types of things you got called out for on ICM have been happening for weeks since you showed up there.. and it's not a big shocker, lol. Hell, somebody else just echoed my sentiments exactly not 5 mins ago over there.

You ask everyone else for 'proof' yet cannot provide any yourself. Typical egomaniac who thinks his time spent 30 years ago in some 3rd world country has anything to do with what's being produced currently in the USA.

USB scopes are 40 bucks.. but you claim you have never looked through one or even through a $10 loupe.. but still preach science.. lol. You haven't even done the most basic of the basic and sit there talking like some professional.

Now I see why you preach the 16 week or whatever rolling to purify the hash.. yours is dirty to begin with. Makes sense now.
 
Last edited:
Frenchy Cannoli

Frenchy Cannoli

Well-Known Member
Delusional like it is a challenge. I am not challenging you see I just want to lab test different techniques but I prefer to work with people I respect. I have none for you.
Would you just forget I ever asked you to do a session with me. Please!!!
 
M

MnH

Well-Known Member
You absolutely did challenge me, you even claimed "i never said we'd do this at the cup!" when in fact.. whoops.. yeah you did and it was quoted on ICM.

It's like you get so baked you completely forget what you already said. Newsflash.. it's still posted for everyone to see.

But i'm glad you lost respect for me because you have no idea what you are talking about?

Didn't cut in line, didn't do anything of the sort but you are all butthurt like I did. You gonna cry because I didn't bring you any sift to the cup like you did on ICM? I didn't bring ANYONE any sift to the cup you knob. I didn't even smoke but about twice or 3x as I was only there for 4 ish hours on Saturday.

Glad you are up to snuff on what's going on though in that insane head of yours.

People respect truth and evidence. Neither of which you have to offer as you've never done the science behind it, simply your personal experiences.

You claim all these things about quality, purity, terpene content, etc. yet have not done ONE SINGLE ANYTHING to prove any of it, but still preach it as pure fact.

You have not done the most basic item in the list, use a simple microscope to check contaminant at a microscopic level.. lol even my first time sifters have done that.

Some hashishin. It'll be fun to watch you and b.man do a side by side sifting session, nothing like free advertising from you guys carding back and forth out in the snow or something. Maybe this video will come in under 2 hours? Doubt it though.

And for the record, you keep telling me 'i'm not doing anything new' well.. actually, I am. You telling us you saw my method in Morocco back in the day? Or in Nepal? Why weren't you using it then? You just enjoy making inferior hash while taking longer to do so?

You are the one doing the old school stuff, YOU are not doing anything new.

You have this twisted.

And further.. you respect him? So you're saying you RESPECT people who lie/cheat/steal from others just because? I didn't take his method, did I? Did he take mine? Oh yeah he did..

Thanks for showing us exactly what kinda person you really are, Frenchy. You'd rather hang out and kick it with liars and thieves you 'respect' than someone actually bringing new and pertinent information to the industry.

Nice. Even funnier is I had to tell Loren how piss-poor and amateur you came off at ICM in those sifting threads.. you didn't even know where the fucking terpenes were produced lmfao.

You know nothing of high end dry sifting mr. card it back over another screen 'if it's not clean enough'.. and i think we all know it's not.

lolol
 
Last edited:
M

MnH

Well-Known Member
Do you want me to post your replies leading up to yesterday even? You claiming you never offered to do it at the cup (but you did) then claiming you wanted to see me at the cup (but didn't) but then were offended I didn't bring anything to show you and do the method (but you claimed you never said that) but i've got proof of all this? What about you saying this the other day

Frenchy Cannoli;6426859 said:
DSW has my email and phone number. It's up to him.
Click to expand...
There is a dozen posts over there that make no sense from one to the other. You said you 'were working during the cup and had no time' then in another thread bitched that I didn't show up and show you my method?? Which is it, you crazy fucker?

You even said the date was up to me and I knew how to contact you etc.. this was 2 days ago lol.. you forget already?

It's already been pointed out over on ICM that you are backpeddling like crazy and are just twisting everything I say around because you finally realized you were gonna get punked in a sift shootout.

You were more than adamant about this being some type of challenge to put my shit to the test.. you even got on me about 'having all these pictures and such' like it's a bad thing.. ?? Where are yours hash master?

At least I can back up what I say with proof, unlike somebody else I know right now.....

My BHO is fyah. But no I don't have lab tests.

PLEASE BELIEVE MEEEEE /nooBcake hash maker

Also, your English is just fine, you're just a fucking liar.

Frenchy Cannoli;6427898 said:
Never offered to do it at the Cup since I work during those events, let's be real. On the other hand the fact that you didn't even bring some of your sieve to show and smoke is weird for a better word.
You were extremely rude, jumped a long line without introducing yourselves and did not offer any of your dry sieve. Strange to say the least!
I did not recognize you, I see thousands of dude looking just like you at every events.
Your approach was totally lame, you are supposed to be interested in comparing and showing the advantage of your technique or did I lost something in translation
Click to expand...
So let's be clear... this above was posted AFTER these, prior to the cup obviously, or how could it make sense? Well, you don't make much sense anyways, so who knows.

Originally Posted by Frenchy Cannoli
You want to show that what you do is the best, you are welcome to come and put it to test. I will bring the trims, the camera, the macro lenses, the photographer (TC) and anything you would need. Then we can talk!

Originally Posted by Frenchy Cannoli
DSW was invited and accepted the invitation on ICMag, invitation(s) are open to a degree and you can meet me at the Cup this week-end if you want to share the experience.

If you are going to say things, you better make sure it's not still available for everyone to readily figure you for a liar.

You also stated I was rude and such, yet in multiple posts admitted you didn't know who I was.

That's... impossible.

To quote one of my favorite bands, "does the word DUH, mean anything to you?"

This has ZERO to do with anything other than you talking shit and ultimately realizing you were gonna get slaughtered and embarrassed on a world scale by some new kid and his stupid dry sift trick, as you so eloquently pointed out to the people in front of me during Saturday.

But yeah you're right, go work with the guy who rips all his shit off of other people, that'll punch you up a notch in the world.
 
Last edited:
M

MnH

Well-Known Member
Stop lying to people and making things up and maybe people will be polite to you?

Shocker I know coming from somebody who clearly has no respect for himself, let alone the industry.

We are all glad to know you support ripoff artists instead of actual hash makers.

Cheers.

BTW, is this still a translation issue? Or are you going to ignore it now that I posted proof you are in fact insane?
 
G

god1

Well-Known Member
MnH said:
Stop lying to people and making things up and maybe people will be polite to you?

Shocker I know coming from somebody who clearly has no respect for himself, let alone the industry.

We are all glad to know you support ripoff artists instead of actual hash makers.

Cheers.

BTW, is this still a translation issue? Or are you going to ignore it now that I posted proof you are in fact insane?
Click to expand...

Hey,

The dude smokes a lot'a dope, and he's old, maybe he just got a little confused.

Sounds like you guys had a good idea, to demo three methods.

Why not just start from there and let this go.

You've already made your point.
 
M

MnH

Well-Known Member
I am still trying to figure out what set him off. As of 2 days ago everything was going fine and it was up to me to get in touch with him to set it up/etc..

All of a sudden it's like I shot his dog or something and he hates me for no reason.. made up the story about coming to his booth and being rude out of the blue and shit.. I have absolutely zero clue what's happening..

Only thing I figure is like I said, he'd rather show his true colors and lump himself in with b.man and the others instead of real hash makers? Hell if I know lol.
 
G

god1

Well-Known Member
MnH said:
I am still trying to figure out what set him off. As of 2 days ago everything was going fine and it was up to me to get in touch with him to set it up/etc..

All of a sudden it's like I shot his dog or something and he hates me for no reason.. made up the story about coming to his booth and being rude out of the blue and shit.. I have absolutely zero clue what's happening..

Only thing I figure is like I said, he'd rather show his true colors and lump himself in with b.man and the others instead of real hash makers? Hell if I know lol.
Click to expand...

I don't know either of you guys, but have observed French via weed nerd. He seems pretty cool. He also gets pretty fried.

Sometimes ego's get in the way of rational thinking --- and the fact is, whatever happened really doesn't matter if you guys can work it out going forward.

I'm being real selfish here, I just want the opportunity to learn something.

That proposed experiment seemed pretty cool.

Good luck to both of you.
 
M

MnH

Well-Known Member
If smoking hash makes you like that then i'm going to stop.

The guy is highly confused and calling me out and slandering me over a mistake, which isn't something i'd ever do online, especially when i'm on other forums talking to the very same person and asking when we are going to do said session lol.

Dafuq
 
Daub Marley

Daub Marley

Active Member
god1 said:
Sometimes ego's get in the way of rational thinking --- and the fact is, whatever happened really doesn't matter if you guys can work it out going forward.

I'm being real selfish here, I just want the opportunity to learn something.
Click to expand...
Thank you! I completely agree.
I don't even get why they are backing "their" methods like they'll die if their method isn't the best. Who cares? The way I think about it is that if you show me your method and it's better then I'll start using your method, and thank you for showing me. Instead of proving "your" method is the best you should be attempting to learn something from the other even if you feel it has very little value.
On a side note I would say that IMO unless you really start to learn and put your nose to the grindstone you will fail. The industry has been secluded for a very long time and that has sheltered the scientists and engineers from pursuing a lot of things within it. As more and more smart and talented people enter this field its going to be much harder to compete against them.
 
M

MnH

Well-Known Member
It's never been about whose method is better. I have simply asked for basic pictures from him and he cannot produce them.

He is on other forums blasting people for not having 'hard science' to back up their claims but it's him who is tossing his opinions around as such, and has been called out over on icm for it multiple times in the past few weeks.

Bottom line is he is on one forum saying one thing, and on another forum saying another thing, getting confused and making things up in order to hurt others business ventures.

Surely he wouldn't mind then if I go to a couple forums and explain how Frenchy was harrassing my customers at a gtg during the cup and such? I doubt it, can only be good for his business i'm sure.

If any mods see this nonsense and feel like deleting all the comments feel free. Shame I have to get put on blast in my own thread by somebody making shit up.
 
Last edited:
D

DarthBlazeAnthony

Well-Known Member
MnH said:
Are you ever going to explain to everyone on the internet why all was good a few days ago, and then after the weekend you decided to go slightly insane and claim that I cut in line and was causing a disturbance at your booth, which of course couldn't be any further from the truth?

Sounds to me like you made up some bs story so you could back out without looking like a scared little kid who is afraid to have his ass handed to him.. you made the challenge and set it up, told me the timeline was on me, then offered to bring trim and product, then for no reason whatsoever you back out and start claiming you want nothing to do with me?? LOL.

Makes sense.

You've also claimed that myself, Sam, Ester, and others *could not* tell the difference between dry sift and ice wax blind testing.. which is of course, absolutely hysterical lol..

You claim "only a lab can tell the difference".. have you done said testing? Or is this just another one of your scientific bits you have not tested yet claim as facts?

Is this the same as you being able to make dry sift just as clean as me, but can't prove it? Not one single picture? Never used a loupe? A scope? NEVER in all your years have you checked out the microscopic contaminant content in your sift, yet you are making claims like you've done it hundreds and thousands of times?

You preach 'science' over on ICM and you have done the LEAST amount of actual science of just about anyone on that site. You clearly have become angry because you got slapped around at every turn when Sam had to straighten you out on multiple subjects which have been covered over there dozens of times.

What about claiming I cut in line at your booth, but on another forum claiming you didn't recognize me and had no idea who I was? Is this just another in a long list of Frenchyisms that you say yet have absolutely zero proof or evidence of, and are even making things up because you've clearly run into a road block you don't wanna jump over? Easier to turn around instead of going through with all the shit you talked about challenging me.. now you don't care haha.

I get it though, easier to work with other hash makers who you haven't challenged/backed out on. I can't imagine with an ego the size of yours, you'd enjoy having to admit that a kid blew your shit out of the water and did it in a fraction of the time without carding or refining. B.man certainly is out there telling people about some 'magical' method that uses quarters (lol) to separate the screens and you don't have to card etc.. guess whose method that is, turbo?

It's getting ridiculous and if you're laughing i'm glad, because if I came off looking that stupid on multiple internet forums i'd have to laugh a bit at myself too.
Click to expand...
Can ya link your method please. Very curious especially because we can tell you mean what you say. I like the fact you are standing up for yourself and prepared to explore new methods. Cheers brada!
 
M

MnH

Well-Known Member
Word thanks Texas.. I wasn't really sure if posting that was allowed or not haha.. other forums have a hissy fit..

DBAnthony.. thank you man. I truly do believe in what i'm saying and there isn't a chance in hell I am going to back down off of that. I have been doing this method the same way for about 12 years now and there isn't any way possible I am going to 'concede' this has been done before.

If it had been done before, this thread wouldn't exist, other forums would not have gone nuts over it as well, and I wouldn't own and operate a legal business right now. I hear all these claims of 'you aren't doing anything new' .. so then why everytime I ask for a link or proof to the same thing, I get empty nothingness? Hmm.

Makes ya think. Cheers.
 
D_Urbmon

D_Urbmon

Well-Known Member
I just read this whole thread. While I love my full melt 90m bubble hash I really really want to try this.

Any rough estimate on shipping to Canada?
 
M

MnH

Well-Known Member
D urbmon right about 60 bucks either size kit. I'll eat a few bucks if it goes over that, but i've sent a few up there and that's about right.

Cheers man.
 
You must log in or register to reply here.
Top