Advice needed

GDub26!

New Member
Hello,

I am a newer grower with about 6 harvests under my belt. I have gone from 1 and 2 plants to a bigger set up with a tent and 7 plants. I have 2 2000W led lights. Exhaust vents. Humidifier and track temperature control. I screwed up and numbered my plants. All different genetics. Garila Glue,Big Bud,skunk #1, Cali Kish and final Bruce Banner. The plants are almost 7 weeks old and I noticed they would burn with the smallest amount of “Garden Rich root and grow” so I stopped using it. The plants look great. About 2 weeks ago I started seeing burn on the ends of Leif’s. I cleared the damage and raised the lights. Over the past 3 days I have been seeing the same thing happening. The tent stays between 68 and 70% f and humidity between 45 and 50. I only use rain water and find myself watering about everyday. The death I am seeing is on the top nodes. The canopy is right between 625-690 umLu’s which is low from what I’ve read. Here are the pictures.Looking for help from experienced growers. Also I did a Ph test a week ago and was right at 6.0.
Also my Skunk #1 has 2 main nodes that almost look like completely different plants. The one side really healthy and the other a lot of Leif damage. 8A33C615-B7F0-4FC8-BA17-9E57B2DF0A82.jpeg4BAD6963-C648-4AAA-8276-4282A0C5A6F8.jpeg45D58054-8C17-4DE8-B6FD-C3207DE1CAB9.jpeg5ECCC061-4590-4753-95E0-B007F38E4B2F.jpeg41161585-CC26-440E-856C-5DE193B20EC7.jpeg70E2F6BE-9EAD-4E07-91C2-77E836676E72.jpeg5CB216C4-2310-47AB-BBAF-F157AB054B81.jpeg86DC463F-72D1-4196-808D-D06C352B4D25.jpeg09F8D89C-B822-43BE-BFAA-A2EC2446A28B.jpeg
 

Attachments

calvin.m16

Well-Known Member
Leaves are "tacoing" from too much heat and possibly too much direct wind. Your numbers are off on your thread, looks like your temps are ranging from 69-108 °F 20-94% RH.

Keep humidity around 50% marker and try getting temps between 70-80 °F. Once you've completed that you can move onto trying new things or changing other stuff.
1658287898859.png

There should be a reset button on the top/back of that device, I'd reset and try to improve the numbers.
 

GDub26!

New Member
Thank you I didn’t know wind could cause that. I did just add a fan pointing downward. Should I move the fan to ground level?
 
Top