I accidentally was trying to lst one, but the stock snapped near the root.. I stinted it and stopped there. The leaves are all perky. As you may see I fim'd 2 of them, instead of lst, to level out those axi-o-thingamajiggers. the one that snapped is perrky n workin. I think as the root zone expands the heat stress is diminishing. Now That I changed the res idk if you can tell, but hella green. way greener then they were.Now when to flip the switches? I got another 1k and a 600 in there and a dimmable 600 for veg. Idk if the 250 or 440 or 600, the dimmable watts in veg tent, will pop the breaker tho. I have not been able to test it yet. one of the ballasts I bought was bad. Id hate to run an extension cord through the attic, but can. The air dynamics is another issue. The vent in the room should probably not be enclosed in panda film veg area. Right now I have it outside the flower room so there is negative air pressure and the carbon filter is on the opposite side of the incoming air port to draw the cool air across the plants in flower. its 108f outside here today where I am from. I am thinking that I'll run the filter in the flower area still. But to hook all the lights up to a 400 somthing cfm inline fan, is that okay for 3 lights? IS there a limit to the amount of ft to use for that fan? It may get hot in there? Do you think the veg tent needs crazy ventilation? I dont think its as important and I could let the humidity spike if it totally inclosed, is that a good idea? Would there be an issue with the light reflecting into the flower hoods form the veg. All things I am prolly ganna test it anyway, but any advice would be AWESOME!!!!!!!!! thanks y'all.