Bublonichronic
Well-Known Member
couple pics of the finished product
Amber Glass BHO
- Thread starter Bublonichronic
- Start date
Dan Kone
Well-Known Member
I've tried it. It purges a little. But nothing like a real vacuum purge.
Dan Kone
Well-Known Member
yep. That sounds about right.
Dan Kone
Well-Known Member
It's cheap, it's only like $10. Can only find it online.
jcdws602
Well-Known Member
Have you guys tried these?? http://www.amazon.com/gp/offer-listing/B00005Q4OD/ref=dp_olp_used?ie=UTF8&condition=used
washedmothafuka
Well-Known Member
Bubblechronic...I wouldn't call that finished. You need to heat the jar to get the erll liquid. That looks like it's still got quite a bit of tane. You could probably scrape it off, and double boil on 130 into some nice shatter oil.
Buddy Hemphill
Active Member
tip o the day..
stirring hotplate.
Oh yeah baby.
Wanna make the purge easy greasy? Drop a pellet in, set the temp, set the spin speed, and walk off....
On top of that...if you aren't agitating larger runs...chances are you aren't getting the purge you think you are.
And if you DO "swirl" it enough to get a good clean med...you probly stood there a few days.
There's a little further to go than heat and vac...
stirring hotplate.
Oh yeah baby.
Wanna make the purge easy greasy? Drop a pellet in, set the temp, set the spin speed, and walk off....
On top of that...if you aren't agitating larger runs...chances are you aren't getting the purge you think you are.
And if you DO "swirl" it enough to get a good clean med...you probly stood there a few days.
There's a little further to go than heat and vac...
Dan Kone
Well-Known Member
boooo!tip o the day..
stirring hotplate.
Oh yeah baby.
Wanna make the purge easy greasy? Drop a pellet in, set the temp, set the spin speed, and walk off....
On top of that...if you aren't agitating larger runs...chances are you aren't getting the purge you think you are.
And if you DO "swirl" it enough to get a good clean med...you probly stood there a few days.
There's a little further to go than heat and vac...
but thanks for the tip.
Buddy Hemphill
Active Member
Are you a no-taner?....lol...
It will make you a no-brainer...
yoMTVraps...here I come!!!
I hate to say it...but the truth is you can purge any solvent out of oil with the proper knowledge.'
But that is a HUGE disclaimer...because 99% of the people blasting tane dont have a clue other than internet banter.
http://youtu.be/waXUxhDCg3U
Dan Kone
Well-Known Member
yeah. I was just hoping my new vac purge was an instant magic trick to get instant clean oil. Then you had to go crush my hopes and dreams with all that reality stuff. I needed to hear it, just didn't want to.
Bublonichronic
Well-Known Member
i did heat it, on "warm" setting on my skillit..but you are right, unfortunately i didnt purge it long enough
Bublonichronic
Well-Known Member
couldnt help myself, i like to edit vids, ahha [youtube]Gmd96kEX5XM[/youtube]
Bublonichronic
Well-Known Member
ok so after a second low heat vac purge i realize its not going to be so easy gettin the butane residue out, lol...so im gonna pick up one of these things http://www.amazon.com/Actron-CP7835-Vacuum-Brake-Bleed/dp/B0007VT4RC/ref=sr_1_sc_3?ie=UTF8&qid=1326836991&sr=8-3-spell and if that dont work, i guess it is nessicary for a expensive pump and chamber, but to be honest, im kinda starting to wonder if that will even get it all out...i dont think i have ever seen anyone "flame test" some supposedly clean stuff...only do "dabs" which wont expose the butane residue on camera... but i mean this stuff has to be cleaner than half the shit out there and is STILL full of butane, maybe matt rize had the right idea all along, ahha
Buddy Hemphill
Active Member
you in Cali homie?
Here's the sure fire test...
take it to a lab and spend the $150-$200 it takes to know fur shure.
Why fuck around?....Think about it this way...how much money have you spent on retail sax of weed in your life?
How much money have you spent on JUST cans of tane?
Tane blasting gear?
Perhaps do your best...purge it as best you possibly can ...and get it sampled for petroleum distillates.
You will know if the best job you can do with the gear you have is up to snuff, or not.
Moreover you wont get cancer on your ballsack. : )
Here's the sure fire test...
take it to a lab and spend the $150-$200 it takes to know fur shure.
Why fuck around?....Think about it this way...how much money have you spent on retail sax of weed in your life?
How much money have you spent on JUST cans of tane?
Tane blasting gear?
Perhaps do your best...purge it as best you possibly can ...and get it sampled for petroleum distillates.
You will know if the best job you can do with the gear you have is up to snuff, or not.
Moreover you wont get cancer on your ballsack. : )
jcdws602
Well-Known Member
This one is a little cheaper......it's the one I use****and did you purge when your oil was in a molten state,it didn't look like it in the vid,heat first then purge..............http://www.amazon.com/Mityvac-MV8000-Automotive-Brake-Bleeding/dp/B00265M9SS/ref=sr_1_2?ie=UTF8&qid=1326838077&sr=8-2
Bublonichronic
Well-Known Member
ahha, nah im in nevada bro, but as far as testing it, this is my "ghetto lab test" i assume the sparks are butane residue right? sorry cant embed this vid
http://www.youtube.com/watch?v=cC9ei2WnfiI
http://www.youtube.com/watch?v=cC9ei2WnfiI
Bublonichronic
Well-Known Member
just got home with my mightyvac, it says it will only creat and hold a vacuum of 25, you get clean stuff with this? hope it pulls a better vac than foodsaver
Buddy Hemphill
Active Member
Try stirring it vigorously between purges. Especially after the final purge...stir it GOOD and hit it with another purge and see if all the tiny bubbles stop