peoples
Well-Known Member
Hello y'all!
I have been pondering this setup for quite some time, and is starting to puzzle the pieces.
After reading up on ventilation I found myself a little short of expertise, so to speak.
If anyone out there want to come to my humble setup rescue and look over the number, I would be much obliged!
This is where I'm at:
Growroom!-!
2.5m * 4m * 2m
10m2
20m3
Starting with 4* Gavita PRO 1000 DE EU
http://www.gavita-holland.com/index.php/products/gavita-power-line-high-performance-lighting/item/gavita-pro-1000-de-eu.html
" * room for upgrades = 2 extra PRO 1000 and 2 Gavita PRO LEP EU
( http://www.gavita-holland.com/index.php/products/gavita-power-line-high-performance-lighting/item/gavita-pro-300-lep-eu.html ) "
Correct me if I am mistaken, but could my ventilation calculation be something like this:
20m3 * 60min = 1200m3/hr <- this is what I need to replentish the room completely every minute without any filters or other
interferrences.
I have read that it's "recommended" to replentish the room every 2-3 minutes or so.
If so I take in to calculation of
8 1000w with a boost capasity up to 1200w (15% for each 1000W)
1 filter (20%)
10% for extra juice
0% for ambient temperature = aircon
I found this guide for ventilation, which is in cfm, so I was not sure if the calculation would work with m3, prolly not.
http://www.bghydro.com/bgh/static/articles/0606_vent.asp
After converting my m3 to cf and adding the % I arrive at 587cfm minimum exhaust fan needed.
Does this make sense ?
If so, I was thinking of running this fan:
Manrose MAN280M
http://www.manrose.co.uk/specifications/maninlinecentrifugalfans.pdf
with this filter:
Phresh 1000m3
http://www.tienda.2odd.es/index.php?id_product=52&controller=product <- cm/m3
http://www.phreshfilter.com/about/size-selector.aspx <- inch/cfm
I know that the fan is a tad over the recommended "maximum" from Phresh side, but I could always trim it down.
I would love to get your two cents on the matter!
I have been pondering this setup for quite some time, and is starting to puzzle the pieces.
After reading up on ventilation I found myself a little short of expertise, so to speak.
If anyone out there want to come to my humble setup rescue and look over the number, I would be much obliged!
This is where I'm at:
Growroom!-!
2.5m * 4m * 2m
10m2
20m3
Starting with 4* Gavita PRO 1000 DE EU
http://www.gavita-holland.com/index.php/products/gavita-power-line-high-performance-lighting/item/gavita-pro-1000-de-eu.html
" * room for upgrades = 2 extra PRO 1000 and 2 Gavita PRO LEP EU
( http://www.gavita-holland.com/index.php/products/gavita-power-line-high-performance-lighting/item/gavita-pro-300-lep-eu.html ) "
Correct me if I am mistaken, but could my ventilation calculation be something like this:
20m3 * 60min = 1200m3/hr <- this is what I need to replentish the room completely every minute without any filters or other
interferrences.
I have read that it's "recommended" to replentish the room every 2-3 minutes or so.
If so I take in to calculation of
8 1000w with a boost capasity up to 1200w (15% for each 1000W)
1 filter (20%)
10% for extra juice
0% for ambient temperature = aircon
I found this guide for ventilation, which is in cfm, so I was not sure if the calculation would work with m3, prolly not.
http://www.bghydro.com/bgh/static/articles/0606_vent.asp
After converting my m3 to cf and adding the % I arrive at 587cfm minimum exhaust fan needed.
Does this make sense ?
If so, I was thinking of running this fan:
Manrose MAN280M
http://www.manrose.co.uk/specifications/maninlinecentrifugalfans.pdf
with this filter:
Phresh 1000m3
http://www.tienda.2odd.es/index.php?id_product=52&controller=product <- cm/m3
http://www.phreshfilter.com/about/size-selector.aspx <- inch/cfm
I know that the fan is a tad over the recommended "maximum" from Phresh side, but I could always trim it down.
I would love to get your two cents on the matter!