bicit
Well-Known Member
I know enough to never buy one
Kind of an ignorant knowledge base, but OK. Ignore perfectly effective technology....
I know enough to never buy one
That is what its about as long as your happy with the results life is good.It makes more sense to setup shop with DE right now. This circular argument doesn't need to keep going on. DIY led is more for hobbyists and research and development. But seriously, if you looked in one of my tents, you'd be shocked at just how bright these things really are. I've actually burned holes in my floor at low setting, the same way you'd burn ants with a magnifying glass if you're at point blank. It's easy to believe the lumen values and calculated efficiency when you see how bright they are in person, or what they can produce.
Keep in mind, I'm not a salesman (i'm the one that gives away everyone's recipes)... I've used HPS all my life, experiented with COBs to see what they were all about (i ignored all the other LED shit for over 10 years.), and have been very happy with teh results. Would have I saved money using HPS? Probably.
That is what its about as long as your happy with the results life is good.
People tend to think i am totally against LED tech or cobs i am far from it
Kind of an ignorant knowledge base, but OK. Ignore perfectly effective technology....
If I had just a few lights and heat was an issue maybe. But I have great systems that kill it and I wouldn't jeopardize perfectly fine setups for technology that I have heard nothing but bad things about from other larger scale growers. Like I said before, might work ok on a small scale but there is a reason everyone isn't switching over to them. When DE hit the market, everyone switched almost instantly. Led has been around for a while and yet I don't see warehouses full of them. There is not 1 person out there that will say DE isn't as good as regular hps, but there are many who say LED doesnt compare to hps.
You know what you guys have convinced me, what is the best LED on the market that will even compare to my DE HPS? I will do a small scale test to see. I bring all my runs to sequoia labs so I will be able to see for sure.
The best LED on the market. The top bin 3000k 80cri CB bin driven at 700mA (72V version)
http://www.cree.com/~/media/Files/Cree/LED Components and Modules/XLamp/Data and Binning/ds CXB3590.pdf
It boasts a luminous efficacy of source of 168lm/W at 700mA, and an efficiency of 51.67%
![]()
Driving lower would make it run even more efficient, but be more cost prohibitive as you'd need more cobs to get the same output.
You can get slightly better actually. The 36v CXB3590 @700ma is about 58% efficient.
3 x 3 ???? or being rectangular built 3 x 4 ??? have it a 5 x 5 area i am sure outter plants would stretch just guessingAnd what foot print are these lights suppose to be put over?
But the 36V has twice as many strings of half the length as the 72V version. Running the 36V at 700V is underdriving significantly more, so the $/PARW is about the same.
3 x 3 ????
Yea what footprint are the cobs suppose to be put over. I run my ac/de over 4x4 but I know a lot of people wh run their DE over 5x5