Are voltage regulators necessary??

Sorry for the wait
 

Attachments

  • IMG-20181203-WA0004.jpg
    IMG-20181203-WA0004.jpg
    112.7 KB · Views: 19
  • IMG-20181203-WA0003.jpg
    IMG-20181203-WA0003.jpg
    61.6 KB · Views: 18
  • IMG-20181203-WA0002.jpg
    IMG-20181203-WA0002.jpg
    84 KB · Views: 18
  • IMG-20181203-WA0001.jpg
    IMG-20181203-WA0001.jpg
    34.5 KB · Views: 18
  • IMG-20181203-WA0000.jpg
    IMG-20181203-WA0000.jpg
    112.3 KB · Views: 20
  • IMG-20181203-WA0001.jpg
    IMG-20181203-WA0001.jpg
    34.5 KB · Views: 18
Was it the proper type and correct rated bulb? I did see you said both were 1000w, but do you have a picture of the bulb, was this the replacement bulb they sent you?
 
Sorry for the wait

nothing obvious jumps out at me with those pics.

the only thing i can think of is that some electronic ballasts will not fire up non electronic rated bulbs. that's why on the higher quality bulbs like hortilux they have a "e ballast compatible" notation.
 
nothing obvious jumps out at me with those pics.

the only thing i can think of is that some electronic ballasts will not fire up non electronic rated bulbs. that's why on the higher quality bulbs like hortilux they have a "e ballast compatible" notation.
It did burn .. It ran the hps for 2weeks.no problem.. I switched to the dual ark, after 3days,problem
 
Was it the proper type and correct rated bulb? I did see you said both were 1000w, but do you have a picture of the bulb, was this the replacement bulb they sent you?
Yes this was the replacement, because the first ones flickered and had condensation in it from a vacuum leak or something along the line
 

Attachments

  • IMG_20181202_115838.jpg
    IMG_20181202_115838.jpg
    3.8 MB · Views: 5
It did burn .. It ran the hps for 2weeks.no problem.. I switched to the dual ark, after 3days,problem

i would have to say your ballast has trouble firing the Metal halides then. didn't you say the Mh went out first? and teh dual arc has MH in it too and it went bad.

can you get your money back on the whole kit?
 
i would have to say your ballast has trouble firing the Metal halides then. didn't you say the Mh went out first? and teh dual arc has MH in it too and it went bad.

can you get your money back on the whole kit?
The MH only flickered, they gave me a new dual ark and MH.. (new mh worked fine for the 30min I tested it) then I ran the dual ark and then the MH par melted
 
i would have to say your ballast has trouble firing the Metal halides then. didn't you say the Mh went out first? and teh dual arc has MH in it too and it went bad.

can you get your money back on the whole kit?
They have given me the option for money back or stand to the warranty and sort it out... I really don't wanna change the setup as it's what I want in the end..
 
They have given me the option for money back or stand to the warranty and sort it out... I really don't wanna change the setup as it's what I want in the end..

if it were me, i'd get my money back and buy the same stuff but from a better manufacturer.


how are you planning on using the 3 bulbs for your grow?
 
But the regulator on the ballast should stop that.. And 2 tv's never broke?
TV is probably a 40 or 60W load....
1000W ballast gets hit like a mofo if they don't switch the power off nicely (they don;t cause the switches are fucked from neglect)
 
TV is probably a 40 or 60W load....
1000W ballast gets hit like a mofo if they don't switch the power off nicely (they don;t cause the switches are fucked from neglect)
It's gotta be a bad ballast then? Cause the one I got sepose to prevent this stuff.. We did get hit our recommended 2hr of load shedding, but that was during lights off anyways
 
Back
Top