Hey all!
I made my first batch of cannabutter yesterday, I'm going to go over the process that I used and I hope that you all can give me feedback on what I should change or leave the same, thnx!
1) Take an Ounce of Schwag (some pretty good schwag might I add!) and ground it up with fingers/grinders (didn't have a coffee grinder.. should i get one?)
2) Pre-heat a crockpot to high setting and melt 2 sticks of butter into the bottom of it.
3) place ground up matter into the butter and stir.
4) I poured about 2 cups of water in over top of it to help cover the pot and make sure that theres enough room for extraction.
5) I cooked this pot/butter stew together on high for 2 hours (stirring every 15-20 minutes)
6) After 2 hours on High, I turned the heat down to Low and cooked for another 4 hours (again stirring every 15-20 min)
7) After 4 complete hours, we strained the mixture back into a glass bowl (with a coffee filter.. which ended up sucking) and we put it in the freezer to coagulate.
The butter rose to the top in about an hour and was able to be scooped out. The butter took on a really dark green (almost gray) tint and was basically...butter (that smells like weed lol).
We took the 2 sticks of butter (which ended up being a little under 2 sticks after we finished) and added a little bit of filler regular butter to complete our cookie recipe.
I tried a cookie at about 4pm yesterday and by 6:30 I was planted and basically incapable of doing <i>anything</i>.
My question is:
-Should I have cooked longer? Shorter?
-Is a coffee grinder necessary? Will it make it more potent/stronger?
-Heat/Low Setting? (I read a plethora of guides the past couple of days on cooking cannabutter and pretty much everyone is different (with a few minor similarities) One guide called for using these specific heat settings (2 hours high, 2 hours low) because it was the optimum way. (he sounded convincing )
-Is it better to use cheesecloth? On realizing that it takes a very long time for the butter to filter through a coffee filter.. we realized that a lot of the butter starts to harden inside of the cooked weed (which caused us to lose quite a bit of butter at the end)
Just let me know your guys'/gals' input, thanks!!
(Oh by the way, whatever information I get from this will be going into my next batch of cannabutter which will be sometime today and I'll take pictures to show results. I hope to be able to break this down to a science.. )
I made my first batch of cannabutter yesterday, I'm going to go over the process that I used and I hope that you all can give me feedback on what I should change or leave the same, thnx!
1) Take an Ounce of Schwag (some pretty good schwag might I add!) and ground it up with fingers/grinders (didn't have a coffee grinder.. should i get one?)
2) Pre-heat a crockpot to high setting and melt 2 sticks of butter into the bottom of it.
3) place ground up matter into the butter and stir.
4) I poured about 2 cups of water in over top of it to help cover the pot and make sure that theres enough room for extraction.
5) I cooked this pot/butter stew together on high for 2 hours (stirring every 15-20 minutes)
6) After 2 hours on High, I turned the heat down to Low and cooked for another 4 hours (again stirring every 15-20 min)
7) After 4 complete hours, we strained the mixture back into a glass bowl (with a coffee filter.. which ended up sucking) and we put it in the freezer to coagulate.
The butter rose to the top in about an hour and was able to be scooped out. The butter took on a really dark green (almost gray) tint and was basically...butter (that smells like weed lol).
We took the 2 sticks of butter (which ended up being a little under 2 sticks after we finished) and added a little bit of filler regular butter to complete our cookie recipe.
I tried a cookie at about 4pm yesterday and by 6:30 I was planted and basically incapable of doing <i>anything</i>.
My question is:
-Should I have cooked longer? Shorter?
-Is a coffee grinder necessary? Will it make it more potent/stronger?
-Heat/Low Setting? (I read a plethora of guides the past couple of days on cooking cannabutter and pretty much everyone is different (with a few minor similarities) One guide called for using these specific heat settings (2 hours high, 2 hours low) because it was the optimum way. (he sounded convincing )
-Is it better to use cheesecloth? On realizing that it takes a very long time for the butter to filter through a coffee filter.. we realized that a lot of the butter starts to harden inside of the cooked weed (which caused us to lose quite a bit of butter at the end)
Just let me know your guys'/gals' input, thanks!!
(Oh by the way, whatever information I get from this will be going into my next batch of cannabutter which will be sometime today and I'll take pictures to show results. I hope to be able to break this down to a science.. )