ATTENTION All Led Growers!: I need your opinions customizing Led panels

Hey all, I have just received my custom led panel, they made this just for my liking (plants best interest at heart of-course) from one of my Asian suppliers. I've pick my own wave lengths and ratio's, details as follows: 288pc*3wchip 60degree optics ( 10% 410nm, 15% 430nm, 15% 453nm, 40% 642nm, 20% 662nm) 864w only consuming 300w. This light is extremely bright with 3w 60degree LEDs, I chose these wavelengths and ratio's from the graph of peak absorption rates in chlorophyll. Now I want every one to give some insight on these ratios and suggestions are welcome, but please no negative comments this isnt a HID thread just

*Edit

Sorry for all the editing don't post much, but I have been learning from the forum for a while now. I read some good info on cartenoids and their rolls in the plants life. My understanding is that they are vitamins like antioxidants they protect against disease ,uv damage and so on, now they have their peak absorption rates aswell, I want to include them along with the ones above to create the perfect led panels. Will the LED Pros share some info on what type of wavelength and ratios their using and they yields they produce. I seen some damn good grows with leds in the wrong wave length i can only imagine them at peak absorption. I need some advice on ratios I should use with the 2 graphs of wave lengths ( the lights can isolate colors for different stages tho, a timer can be added too, I didn't get these on mine money$$)> the wattage wont be a huge issue either because Hps is only like 30% usable light (if i recall) 1000w=300w. 300wled @ 100% absorption has to be equal if not more efficient..

Sorry I cut myself short, all in all I want this to contribute to the community and bountiful yields we all love getting.

(P.S I can also customize any light for anyone's specs. shoot me a pm if interested)

Where do you get it? The only thing I don't like is that it seems a bit under powered, I'd prefer over 50% at least.

OKkk, imma give you and everyone the whole spill. I have been doing business with Asian suppliers for years but mostly apparel and I was just talking to one of my suppliers one night we just stumpbled upon leds from talking about apparel, I asked him about some manufacturers he told me he had a relative at the led factory giving me the chance to customize and the earned business is already there because I have been doing business over seas for about 5years now with that supplier.The quality is excellent, manufacturing of the lights takes 2-7days(not business just days in general ) + 3-4day shipping express via DHL with 11 days total with the light customized is Bananas thats not even 2wks package to your door . The range if I'm not mistaken is 380nm - 680nm(not 100% sure tho, have to ask)The light is fucking badass and hellabright im not just saying it because I want you to buy it, to be honest I could care less, I know i smoke good and I do well with my other businesses, Im here to contribute to the community not make money. This is my first led attempt i have successfully grow meds with cfl just mimicking buds for less(shout out). The light uses 3w chip leds u can physically see them if you look in daylight at a sharp angle like3 little chips at 60 degrees making a very intense light and 3ft distance you can feel the light energy on your skin from the light, and with my cheap light meter the dial is still maxed @ 3ft out and its measuring lumens from peak absorption that might not be a big thing for your but for me it is because I was only cfl until this point pulling off 6-8oz off 3 plants( once again Bud for less is the shit!). Now im not exactly sure if the consumption is right because I told the manufacturer to rate the light at 300w watts and declare it as a gift to get it to clear customs( understand i have a business and constantly have my name and address to be ran thru the system) so Im going to ask the supplier and get back to you on the consumption. The light was made in Hong Kong , Bluesea is the company name. if you want too look into getting something let me know, plus you'll get a refund if your unsatisfied, im so confident you wont with 100% absorption despite the consumption no other light ive seen have the exact peaks in nanometers, and if there are pls tell me because I want to maximize this design I have im sure we have room for improvement/

RoloTomassi said:

Where do you get it? The only thing I don't like is that it seems a bit under powered, I'd prefer over 50% at least.

Click to expand...

I double checked with the supplier and yes the light is 864w and I Quote "

Hello Aaron,

Yes is 864w, I have asked my merchandiser after I read your email. She said that the clerk type a wrong label. The clerk has been in our company not so long, so she doesn't
know the difference between 1W and 3w leds. I am really sorry about this. I should told her be more careful.

The light is absolutely 288*3w leds. There is a way to check: When the light is turned off, you can look the leds carefully, if there are 3 small chips in
a led, say they are 3 chips 3 watts leds. If there is only one, say they are 1w leds.

Aaron, I do apologize to you again. Hope you can forgive my carelessness.

Yours sincerely,

Terry

RoloTomassi said:

Where do you get it? The only thing I don't like is that it seems a bit under powered, I'd prefer over 50% at least.

Click to expand...