the seedman
Active Member
ok, cool scary hell demon, i'll send em some dosh
Aussie Growers Thread
- Thread starter jats
- Start date
ok, cool scary hell demon, i'll send em some dosh
Yeah oops, I don't smoke the stuff either, always been interested in plants and this is more profitable then propogating succulents.
Furthermore anyone wanna buy some compost worms I breed them too.
jimmy130380
Well-Known Member
For clones no nutes just a little supperthrive
spray 3 times a day and keep the ood closed to lift rh
in a bubble cloner temp of water is really importaint and Lacey ran a set up and had problems but worked it out
she would be a good info person
how is every doing this Friday pumped for the weekend?
spray 3 times a day and keep the ood closed to lift rh
in a bubble cloner temp of water is really importaint and Lacey ran a set up and had problems but worked it out
she would be a good info person
how is every doing this Friday pumped for the weekend?
the seedman
Active Member
far out thats a hard site to get on and find stuff at?????
dpmymrs
Active Member
sweet thanks man. i wasnt sure cos ive seen different threads explaining their DWC setup and never seen or noticed a mention of a hood required. i spose ill research a bit more into ideal temp and yea
as for the weekend, fuck all apart from prepare for a fuckin real estate inspection on tuesday
conepuller2299
Well-Known Member
hey guys, i live in nsw *newcastle*
when is the earliest you can plant outdoor plants?
i know were smack bang in the middle of winter, but how early can i plant them without them going to flower and re-vegging?
when is the earliest you can plant outdoor plants?
i know were smack bang in the middle of winter, but how early can i plant them without them going to flower and re-vegging?
Go onto the BOM and check your daylight hours (over 12) (sunrise sunset) I know in Brissy it's around 16th sept so you'd likely be a few days later.
smallclosetgrowr
Well-Known Member
around 2 n half months
you could always start off with some fluros and then transplant out doors later?
hazewaiter
Member
Wonder if anyone can help me out here....Im looking to vent my cabinet with an inline fan. i want the fan to run all the time (day and night) at a low speed but kick in to full power when the light is on. I cant find any one product that will perform this function for sale in Australia. Jaycar sell a fan speed controller kit for $100.00 but I reckon that too pricey. then I'd still have to wire in a thermostat somehow. anyone have any ideas on how to solve this problem? Im open to any reasonable suggestions. cheers
if you havnt already bought the fan, you could always run two smaller ones?....Run one of them on lights out and run both with lights on?
hazewaiter
Member
thanks skiz yeah id thought of running 2 fans but due to noise and cost i dont really want to go that route. centrifugal fans are about 200 bucks. I'd rather just have the one and control it. I have a bit of electrical knowledge but I want to see if anyone knows any products that could solve my problem (and save me getting electrocuted) or have wired up their own control systems. Just seems weird that this problems so difficult to solve, i thought i'd be more common?
hazewaiter
Member
thanks odlaw thats true. I tend to shy away from buying second hand stuff though, especially where motors are concerned. you just never know how much life is left in them. I know the fans dont use much power but im also concerned about energy consumption (bit of a greenie) so running 2 fans would have to be a last resort solution. Im aiming to reduce energy consumption wherever possible. Im sort of specifically looking for thermostat/fan speed control solutions if possible. thanks for the suggestions though
the seedman
Active Member
i,ve always got a head,,,,start,,, buy using floros, on 18/6 and got a HEAD start on the season this way, my thought exactly
Attachments
Yeah thats what I do I got 7 twin flouro battens I use, only cost me $120.
XxNinjaxX
Well-Known Member
If it were me I'd have 2 fans & 2 fan speed controllers. Run one on a timer for lights off @ 1/2 speed and get it to cut out as the other 1 comes on with ur lights (& it can be wired to full speed with or without the additional controller). Cost ya more $$ but u will only have 1 fan runnin at any 1 time. Seems unneccesary that you wish to do it this way anyhow.. During the night with low air movement is how mould breeds.
MasterHemp
Well-Known Member
where do you guys get your light bulb socket adaptors and splitters? i tried bunnings and some lighting store next to my place but nothing, any places out there?
dpmymrs
Active Member
I bought my lights off discount hydro on eBay, but if ur in Melbourne I checked the trading post the other day for some fluoros and there's a light store with a shit load off used lights for cheap as fuck. so long as u don't mind second hand. also on the net, check gumtree.com.au. one guy in melb was getting rid of a big setup for $700. if I had the money it woulda bn mine
MasterHemp
Well-Known Member
i checked them out, doesnt look like they got splitters but they do have some other stuff im interested in 
ive attached an image of what im looking for
ive attached an image of what im looking for