Ballast wiring
- Thread starter rosswaa
- Start date
rosswaa
Well-Known Member
http://www.lighting.philips.co.uk/prof/electronic-control-gear/hid/hid-electronic-indoor/primavision-power-for-cdm/913700656366_EU/product
Sent from my Pixel using Rollitup mobile app
Sent from my Pixel using Rollitup mobile app
qballizhere
Well-Known Member
Its 220/240v so you have a line a hot and a ground
edit= the 2 green in the middle is the ground on each side a wire goes to each pole of the breaker
edit= the 2 green in the middle is the ground on each side a wire goes to each pole of the breaker
qballizhere
Well-Known Member
no it doesnt they both will carry 110v from the 2 pole breaker I was that you were in EU from the product page you linked.
I run my ballast here in the usa on 220
I run my ballast here in the usa on 220
qballizhere
Well-Known Member
it worrrys me when you say neutral here is why it doesnt carry a current and 2 pole breakers have current on both poles of the breaker
edit = line and hot will let people know a 2 pole 220v breaker is needed
edit = line and hot will let people know a 2 pole 220v breaker is needed
qballizhere
Well-Known Member
according to the pic the mains is on the sides it doesnt reference a difference in wich side is for hot