Best grow method for sog?

Also, don't be tempted to tap the vent stack for your drain, you could end up with drainage coming out your upper floor bathtub and sink overflows.
 
Renfro said:
Also, don't be tempted to tap the vent stack for your drain, you could end up with drainage coming out your upper floor bathtub and sink overflows.
Click to expand...

It’s a separate drain I’ve made Through the floor into room downstairs and then through wall and it goes into the drain in the ground outside
 
Just another thing to keep in mind, I am not sure how much water capacity you intend to place in a reservoir or drum up there but be sure the ceiling joists can handle the load.
 
George2324 said:
When you say flora flex do you mean these?
Click to expand...
Thats just a cap. They make the manifolds and spaghetti to go to the plants, you can buy just the parts you want and make your own larger setup with a larger pump feeding several of these 8 plant manifolds for example.

floraflex.com

6”x6”x6" FLORAFLEX® ROCKWOOL KIT - 8 PLANTS | FloraFlex®

We understand that figuring out which products are right for you and how much you need of what, can sometimes be confusing and stressful, especially for growers who are new to our products or upgrading to automation. A simple automated hand feed system will give you quality and convenience to...
floraflex.com floraflex.com
 
Depending on the setup you may want a solenoid valve on the main line thats plugged into the timer with the pump. This will prevent siphoning or gravity drainage of the reservoir when the pump is off.
 
Renfro said:
Just another thing to keep in mind, I am not sure how much water capacity you intend to place in a reservoir or drum up there but be sure the ceiling joists can handle the load.
Click to expand...

My current setup has two 1000l ibc. Got a steel beam with 2x 6 joists
 
2x6 joists, spacing and span... as long as youve done the math on the space thats holding the weight of the res. Likely will be centered on your steel beam, hopefully.
 
Renfro said:
2x6 joists, spacing and span... as long as youve done the math on the space thats holding the weight of the res. Likely will be centered on your steel beam, hopefully.
Click to expand...

Yeah I currently have a massive led setup with heat sinks wieghing 600 kilos of aluminium and two 1000l (1000kg) tanks for my nft setup so joists aren’t an issue
 
Joists are cross braced and 12 inch on center with steam beam through the middle and 22mm chipboard floor panels tongue and groove
 
George2324 said:
Yeah I currently have a massive led setup with heat sinks wieghing 600 kilos of aluminium
Click to expand...
We would love to see that! We are, for a large part, LED guys here.

Why so much heatsink? High wattage cobs? How many watts per sqft?
 
Renfro said:
We would love to see that! We are, for a large part, LED guys here.

Why so much heatsink? High wattage cobs? How many watts per sqft?
Click to expand...

60w per square foot. I’m switching up to water cooling soon. I went for 25mm wide circular heat sinks from China 13mm long fins and 10mm solid surface before the fins.

4 cobs per heat sink and 15w each. But like I say I plan on scrapping vertical growing and using a larger flat plane of grow space with lower height restrictions

Ive posted a picture of it before throughout my struggles with growing on here I’ll find it a bit later and resend
 
George2324 said:
60w per square foot.
Click to expand...
Whew! The most I have ever ran with quality LED was 40 watts per sqft (cxm-22).

What chips?

I would avoid water cooling or any sort of active cooling if at all possible. How hot do the sinks get, like est chip temp?
 
George2324 said:
60w per square foot. I’m switching up to water cooling soon. I went for 25mm wide circular heat sinks from China 13mm long fins and 10mm solid surface before the fins.

4 cobs per heat sink and 15w each. But like I say I plan on scrapping vertical growing and using a larger flat plane of grow space with lower height restrictions

Ive posted a picture of it before throughout my struggles with growing on here I’ll find it a bit later and resend
Click to expand...
4 cobs on a 1 inch heatsink?
 
Renfro said:
Whew! The most I have ever ran with quality LED was 40 watts per sqft (cxm-22).

What chips?

I would avoid water cooling or any sort of active cooling if at all possible. How hot do the sinks get, like est chip temp?
Click to expand...
George2324 said:
60w per square foot. I’m switching up to water cooling soon. I went for 25mm wide circular heat sinks from China 13mm long fins and 10mm solid surface before the fins.

4 cobs per heat sink and 15w each. But like I say I plan on scrapping vertical growing and using a larger flat plane of grow space with lower height restrictions
Click to expand...

It’s citizen 12/12 mix of 4000 and 3000 90 cri chips half and half on each sink.

They put out a shit Load of heat as they are mounted vertically.

I am thinking of running strip lights mounted on copper pipe so I can actively cool with water.
 
You must log in or register to reply here.

Similar threads

B
Help with RDWC set up
Replies
0
Views
124
bongboy8200
B
T
Water quality problem in veg phase?
Replies
2
Views
280
MickFoster
MickFoster
Psyclops
Psyclops Flood and Drain
Replies
9
Views
289
Psyclops
Psyclops
L
Rockwool F&D: Managing Roots
Replies
10
Views
735
lodaweed
L
ConnManyThings
Sealed/Hybrid? Best Stealth Intake Options?
Replies
2
Views
293
Rocket Soul
Rocket Soul
Back
Top