BHO tips and tricks

R

rioleyman6678

Member
Hello, I just ordered some tubes, a chamber and vacuum pump and am planning on making my very own BHO soon. I was wondering if anyone had tips and tricks for yield success. I have heard things like using a non stick baking sheet to speed up the process and eliminate the process of scraping pyrex plates with a razor, what are your guys' advice?
 
lio lacidem

lio lacidem

Well-Known Member
Heres the biggest tip i can give you. Do not blow bho indoors. Very big explosion risk. I dont make much bho so thats the only tip from me
 
Southerner

Southerner

Well-Known Member
Spray onto one of those silicon baking matts or even into a silicon bowl, something that will fit inside your chamber.
 
midnitetoak

midnitetoak

Active Member
Yeah I started using no goo silicone dish instead of parchment paper & it works great... I got a small 2"x3" one that fits inside my purging jar for like $9 ...so worth it & use over & over. I rather enjoy the process of scraping...some prefer to blast right onto parchment but I like using Pyrex so you can start melting it in a hot water bath right away after initial heat purge & scrape. Then I put the oil in the no goo dish while it's still warm & begin "muffin-ing" in a jar wrapped in a heat pad set on high.
 
R

rioleyman6678

Member
midnitetoak said:
Yeah I started using no goo silicone dish instead of parchment paper & it works great... I got a small 2"x3" one that fits inside my purging jar for like $9 ...so worth it & use over & over. I rather enjoy the process of scraping...some prefer to blast right onto parchment but I like using Pyrex so you can start melting it in a hot water bath right away after initial heat purge & scrape. Then I put the oil in the no goo dish while it's still warm & begin "muffin-ing" in a jar wrapped in a heat pad set on high.
Click to expand...
So what is the difference between blasting directly on to parchment in a pyrex dish vs directly blasting into a pyrex dish?
 
Twitch

Twitch

Well-Known Member
the paper in some cases will have negative effects when the butane hits the paper, people have reported waxy flakes flying off the paper
 
650baquet

650baquet

Active Member
Twitch. said:
https://www.rollitup.org/concentrates-extracts/624465-bho-vacuum-oil-wax-tutorial.html

this needs to be a sticky

everything is in there.... along with some entertaining side banter
Click to expand...
I feel rather proud I guess that I had found that tread when I started with butane. What gave me the initial confidence for solvent extractions was skunkpharmresearch.com
Lots of great info.
Guizas thread is more entertaining though ;P

I basically disappeared off RIU for a while...but I just performed my first butane extraction in nearly 5 months. Got some Stok and a couple oz...and of course used my thermos tek for extraction.

I will have results this weekend and will eventually post pics.
 
R

rioleyman6678

Member
650baquet said:
I feel rather proud I guess that I had found that tread when I started with butane. What gave me the initial confidence for solvent extractions was skunkpharmresearch.com
Lots of great info.
Guizas thread is more entertaining though ;P

I basically disappeared off RIU for a while...but I just performed my first butane extraction in nearly 5 months. Got some Stok and a couple oz...and of course used my thermos tek for extraction.

I will have results this weekend and will eventually post pics.
Click to expand...
I'm trying to make some shatter, any advice?
 
M

MISSPHOEBE

Well-Known Member
I started BHO but with no vac no pumps becoz I dont have electricity etc... but I find it too sticky to manipulate once its in the pyrex dish... is there something I put in the bowl so that it doesn't end up so infuriatingly hard to manage...?
 
U

urban1026835

Well-Known Member
i have a nogoo dish but i would think some parchment type wax paper but never tried it. You can probably find a piece of some kind of silicone something laying around to collect it on. That or if you can get it cold
 
blackforest

blackforest

Well-Known Member
If you blast into pyrex, blast into a round dish. Scrape all you can normal and transfer onto parchment. Then use a razor blade and scrape from the middle out, towards yourself, rotating the bowl...you will get every last bit. (vs a rectangle/square dish)
 
M

MISSPHOEBE

Well-Known Member
I tried parchment the last time and it stuck to the parchment and wouldnt come offfffffffffffff and I did try with a round bowl and got myself into a whole load of trouble........ eeek!
 
Twitch

Twitch

Well-Known Member
MISSPHOEBE said:
I tried parchment the last time and it stuck to the parchment and wouldnt come offfffffffffffff and I did try with a round bowl and got myself into a whole load of trouble........ eeek!
Click to expand...
that wasn't parchment paper then...
 
Guzias1

Guzias1

Well-Known Member
Its a fine art yall !!

650!! Wadddup. Share your thermos tek again on the winterizing thread

I made shatter with a blow dryer, and bho on parchment befoh
fold, blow, fold, blow.
:)
 
Grojak

Grojak

Well-Known Member
blackforest said:
If you blast into pyrex, blast into a round dish. Scrape all you can normal and transfer onto parchment. Then use a razor blade and scrape from the middle out, towards yourself, rotating the bowl...you will get every last bit. (vs a rectangle/square dish)
Click to expand...

I wouldn't recommend a round dish, but if you do use a round dish measure you vac chamber, I've blasted into a 9" bowl and moved that straight into my 3gal chamber it was the clearest shatter I ever made since there ewas no agitating.
 
You must log in or register to reply here.
Top