ok from your pic this is kinda what i figured (look down below)....... if thats is not the same as in your pic then check out this link
http://www.icmag.com/ic/showthread.php?t=11688 and just keep going down the page!
Problems with Copper being Locked out by Ph Troubles
High ph along with highly compacted soil that has a lack of nitrogen.
Soil
Copper gets locked out of soil growing at ph levels of 2.0- 4.5
Copper is absorbed best in soil at a ph level of 5.0-7.5 (Wouldn’t recommend having a soil ph of over 7.0 in soil) anything out of the ranges listed will contribute to a Copper deficiency.
Hydro and Soil less Mediums
Copper gets locked out of Hydro and Soil less Mediums at ph levels of 6.5-9.0
Copper is absorbed best in Hydro and Soil less Mediums at ph levels of 2.0-6.0 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a copper deficiency.
Solution to fixing a Copper deficiency
One way to treat a copper deficiency is by foliar feeding with Copper Sulphate, Cu sulfate, Cu chelates, Those 3 can also be used in soil. Any Chemical/Organic nutrients that have copper in them will fix a copper deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!)
Other nutrients that have copper in them are: Granular, Garden Manure, Greensand.
Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good
enough to get rid of excessive nutrients. Damaged leaves will NOT recover.
Picture 1 is a copper deficiency, (it may look like a over fertilization ( nitrogen) but look at the bottom of the leaves, notice how they are yellow and a bit of white, also some of the fan leave tips are brown and dying off.)