blunt rolling

Its not easy to roll a blunt, it takes a few times to get that perfectly rolled banger.


Blunt Wraps:
By far, blunt wraps are the easiest to handle with. Just simply cut open the plastic and take it out. They should feel very moist, almost leathery in feeling. If you got a dry pack then soak it in water for a few minutes. Once its taken out you carefully un-roll it from the straw, make sure not to tear it because it is sensitive.
Take the blunt wrap and with two hands roll the paper between your thumb and your index finger. Size it up, i usually want the top of the blunt fatter then the end so i skew the paper a bit and lick the ends when im finished. Once you lick the ends and its all sized up to your liking rub the ends with your fingers (this creates heat which lets the paper fuse together). Let it dry for a bit.
Now.. the only part of the blunt that should be unlicked is the center of the wrap, use a wet q-tip of your tounge and wet under the inner flap of the blunt and press together. Now when this is done lick the top of the flap and let it dry for a few minutes.
You have choices, you can either just fold in the mouthpiece like a traditional blunt OR you can have some class and buy a mouthpiece,i prefer wooden mouthpieces.

Now for the fun part!
The blunt tube should be nice and dry, almost crispy. Prepare the ganja for some stuffing, take the sticks and seeds out and break them up nice and small. I use a sweetleaf grinder that makes the job alot easier. Take the weed and start packing, you can use your thumb as a stopper on the end of the hollow blunt (this wouldn't be necessary if you used a mouthpiece) and pack it down nice and tight you can use a pen and lightly pack it, be gentle so the wrap doesn't fall apart on you. Pack it to the top or fold it in if you wish, if you fold the tip in you should wet it and pinch with your fingers.. hold.. use your lighter and repeat until it closes.
For that slow and even burn it has to be just right. If its loose, pack some more weed in and if its tight roll it in your palms to loosen it up. I occasionally use some dry kif into the blunt, it makes an ordinary blunt more explosive!

And that my friends is all there is to it. I think all smokers should give it a try, it is a different experience.

nice blunt.

props to that i was always a joint person maybe b/c i have fears of tearing the fucker and a waste of money, Not that there expensive but enough to piss yah off if yah gotta make a second trip lol.

I swear by blunts, It's my preferred method of smoking and IMO "gets the job done" better than any method besides eating it. Don't get me wrong, I would never pass up a joint, a bowl, or a good bong rip. But blunts get me there, and the tobacco isn't as noticable as you'd think in the smoke.

They're not that hard to roll, buy a pack of swisher sweets, split them all and practice rolling with the tobacco. That's how I learned and have rolled flawless blunts ever since.

Just split it, get it nice and wet, grind/breakdown your weed and spread it evenly, fold the lower leaf over the weed compressing it into a "bar" shape, and rollitup!! Dry it, stuff it, smoke it!

It says this thread has had 27-411 views but only 4 coments, WTF, well 5 now, looks awsome i wish i was a friend of the artist who rolled that work of ''ART''

Damn that's a phat ass blunt.I can't roll that well.

Wrong forum no?

AspiringGrower said:

They're not that hard to roll, buy a pack of swisher sweets, split them all and practice rolling with the tobacco.

Click to expand...

Why do that when you can just use a gram of weed? After every roll open the blunt up and reroll, tobacco rolls different then weed, it wouldn't give you the totall affect.

For a mouthpiece something I do is take the blunt wrap wrapper piece that you tear off to open it and roll it I I^ that way. After you roll the blunt pack one end with a pen and stuff that in there, it will expand to fit the opening and you can undo the end of the blunt and relick it to fit perfectly around it. Now, as long as you got a wrap you got a mouthpiece, Yay! no resin.

Blunt wraps are simple yet effective, plus they come in a lot of crazy flavors.

In fact I just rolled one myself, grape flavored... mmm



Cyclones are pretty bad ass to as they are already pre-rolled.

mogie said:

Prepare the ganja for some stuffing, take the sticks and seeds out and break them up nice and small.

Click to expand...

you had me till you got to pickin the seeds out of the weed... just say no to regs.

now.. never seen anyone roll a blunt this way. i always open up the wrap, put some weed in it and twist it up.. just like a joint, then use part of the packaging for a mouthpiece. will give this a try next time.

book is funny as hell. def worth the $10

Rollin blunts is easy and only way to smoke if you are rolling. The tobacco wakes you up too. I can roll a perfect blunt anyday but I cant roll joints for shit. The papers are so delicate n shit fuck all that. I can't put enough in them or they dont burn right. When you joint rollers grow some balls start smokin blunts.

Ok dis is what u do to with blunt wraps to make a good, even burning blunt.

STEP 1

Prepare your green in the manner that you are most accustomed with. It is also useful to prepare it in 2 diffrent ways.
With one ground finer than the other.

This is so that we can use the bigger pieces for the bottom and top of the blunt and the rest to fill. About a 70/30 ratio with 30 percent
consisting bigger chunks.

You will need at least 1.5gm

STEP 2

Take your blunt wrap and remove all plastic wrapping. Be delicate as u can easily tear that stuff.

Then cut away the glue strip on top and also cut away as much blunt paper as u need. This is so that u do not overwrap the blunt.
(You do not need the glue to seal the blunt)

STEP 3

Now comes the rolling part. try to lightly make a crease at the bottom third of the blunt wrap.

Fill the bottom part up with the slightly coarser bud and then use the finer bud to fill it up.

Now try to flatten the bud inside so everything is nice and even or you could even have it sorta like a cone type if you want. but its slightly harder

Then u start rolling it. You would be looking to push down the stuff with the blunt in between your fingers. That is pretty much the best way i could
describe the rolling motion.

Once u got it nice and tight, lightly moisten at most 5mm of the top end and seal the blunt. do this fast as u do not want the moisture to dry out and leave
you with slightly damp leaf material. I usually lick lightly across the entire length and sealing it fast by roliing it. At this point it is still not strong enough to pack.

STEP 4

Now with the blunt sealed. Moisten the sealed line, then u dry the moistened parts with a lighter. just adjust the lighter for a pretty tall flame and run your blunt
over it. (DO NOT BURN IT!! just rotate the blunt with the flame going up and down the blunt.

This will tighten the wrapper and also seal up the part which was moistened.

When it is dry, pack the blunt by first tapping it on a flat surface (do not use excessive force) then u fill the blunt up with the remaining bud with the coarser bud
to seal the top. This is to ensure that bud wont be just falling off

With the blunt filled (hopefully to the max) roast your blunt with the lighter again in the same technique as described above.
Congratulations, you have succesfully rolled a perfect blunt =D

STEP 5

Now is time to light it up. Please by all means do not use a cheap lighter. Get a cigar lighter.
If you dont have one, use wood matches (burn of the sulphur first) or cedar strips.

This for me warrants itself as a step because if you are going to spend the time and effort to roll a good blunt,
you would not want it to taste like a BIC lighter.

Get those long wooden matches from tobacconists shops u can relight the unburned wood to relight the blunt etc.

Light the blunt by rotating in between your lips with the flame barely touching the top end of the blunt (do not engulf blunt in flames)
You would also have to inhale and exhale short puffs a couple of times to ensure it is lighted properly.

You then blow on the top to leave you a perfect ember.



This is how i usually roll blunts it leaves me with a slow, even burning blunt without any runs 99.8% of the time

I am sorry if you do not understand what I have posted. As I am not a native speaker of the English language.