wishuponaweedplant
Active Member
im making a bong and i cant find what to use as a bowl... i want it to be one i never have to replace and suggestions?
bong question
- Thread starter wishuponaweedplant
- Start date
dew-b
Well-Known Member
get a spent bullit casing. then drill a small hole where the primer cap is then burn it into a wooden dowel.use a counter sink bit to burn it in. it will never burn out the bowl.
dew-b
Well-Known Member
drill aq hole through the dowel the size of a pece of metal tubing that you will use to conect to the plastic tubing that will go inthe water. about 1/4 inch it will make the burning of the casing easer you just use the counter sink bit to heat the casing till its hot enough to burn itself in the dowel gl.
SiKkiNSaNe
Active Member
this is my second.. till my mom found the first one.. i had it for a year and still was cleared. and work like a pro... friends like it better then glass ones. just add water , ice, pack the bowl.. light it.. and pull out 
i used a juice bottle in the Orange Juice section with three bubbles.. its hard plasic. and a permanent marker and a top of a high lighter. with aluminum foil.. works great. its air tight.. and jus tlike a real bong with nice bubbles and u can pull out the stem like a real bong
i just used a lighter to make it.
here's a video.
i used a juice bottle in the Orange Juice section with three bubbles.. its hard plasic. and a permanent marker and a top of a high lighter. with aluminum foil.. works great. its air tight.. and jus tlike a real bong with nice bubbles and u can pull out the stem like a real bong
i just used a lighter to make it.
here's a video.
grassroots
Well-Known Member
thats wat i used to do. I got a bic pen then took both ends off then
taped the ratchet head to one end of the pen.
might wanna use a screen if u use a big socket.
hope this helps
