Bought new setup what u think

C

Cheeseyfeet

Member
Hi guys an gals am new to this forum so any advice given thanks in advance. Today I have bought a 2x2x2 metre tent, 4 600w hps, 16 autopot system, 10 inch exhaust fan and rhino filter with acoustic duct and a 8inch inlet fan with normal duct, fan controller and air brick for res I intend to grow in soil has anybody had a similar setup, what results they may have had and weather they think the vent system is adequate the 10 inch fan moves1020 m3ph and the inlet moves 720 m3ph I have grown previously but in a smaller setup 1 600w light etc etc.
 
Ecips

Ecips

Active Member
Well get started !!
lol. Sounds good 10'' fan is f$'$& huge !
Get er up and runnin
thumbs
 
C

Cheeseyfeet

Member
Cheers fellow tokers I thought the 10inch was a bit big ha ha but least I think it will do the job has anyone use the auto pot system as I was going to buy the iws pot system but decided to just try normal auto pots
 
dveight

dveight

Active Member
i have the same size tent with a 6'' fan and it gets neg pressure ez, a 10'' is going to be strooooooong lol
 
marc88101

marc88101

Well-Known Member
negative pressure...pulling air from a space without replacing it at the same rate, or called proper air exchange
 
dveight

dveight

Active Member
when you walk into my room the sides of my flowering tent are being pulled in ^^^ science terms!!
 
dveight

dveight

Active Member
i dont use a carbon filter but there isnt really any noise. this grow room is on the second story above the garage
 
C

Cheeseyfeet

Member
Ah I see. Good stuff well thanks for the advice dveight is there any one here who has used autopots and do they think there any good
 
dveight

dveight

Active Member
now that im thinking about it, you said you are gonna run 4 600w so thats gonna take a lot of cfm. you gonna throw any pics up?
 
C

Cheeseyfeet

Member
Yeah sure will soon as the baby's are ready to go in dveight might even do a little journal if possible. The 10 inch exhaust fan moves 1020 m3ph so I don't know what that is in cfm but my tent is 2x2x2m so my math tells me my tent is 8m3 so divide 1020 by 60 which is 17m3 per min so there for the fan is capable of pulling just more than twice the m3 of my tent if am right but I will be using a fan controller any way
 
urgod

urgod

Well-Known Member
get some fan controllers... you really dont need that much air to be moved. plus your fan will be alot quieter if its running at a slower speed.
 
C

Cheeseyfeet

Member
I have a fan controller which does intake and outtake also has a thermometer and like a probe on it but thanks for the advice Urgod.
 
You must log in or register to reply here.
Top