2 strings of 4 strips per 150 driver, each at 700mA, but since theres 2 channels per strip it works out as 4 strings when you have both channels on at the same time. That should give approx 2.6-7ish ppf per w, 2.4 if only one spectrum activated. Refer to vesta test thread for the tests
Thanks those drivers for the Vestas got me confused this is the Vestas I'm gonna with 20 of them to almost the same amount of lumens as the slims actually more2 strings of 4 strips per 150 driver, each at 700mA, but since theres 2 channels per strip it works out as 4 strings when you have both channels on at the same time. That should give approx 2.6-7ish ppf per w, 2.4 if only one spectrum activated. Refer to vesta test thread for the tests
This means that when the channel current on each light strip is adjusted to 350mA, it provides a photosynthetic photon flux within the range of approximately 2.6 to 7 PPF/W, I would like to confirm if my understanding is correct?2 strings of 4 strips per 150 driver, each at 700mA, but since theres 2 channels per strip it works out as 4 strings when you have both channels on at the same time. That should give approx 2.6-7ish ppf per w, 2.4 if only one spectrum activated. Refer to vesta test thread for the tests
Cheers to Vesta, bro! How large of a tent do you plan to use with 20 Vesta stripsThanks those drivers for the Vestas got me confused this is the Vestas I'm gonna with 20 of them to almost the same amount of lumens as the slims actually more
BXEB-TL-2750G-3000-A-13 | DigiKey Electronics
Order today, ships today. BXEB-TL-2750G-3000-A-13 – LED Lighting COBs Engines Modules LED Module Vesta™ White, Warm / White, Cool Linear Light Strip from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.co.za
The driver I'm considering is this one
BXDR-60BT-U220P-01-A | DigiKey Electronics
Order today, ships today. BXDR-60BT-U220P-01-A – 2A 14 ~ 57V Constant Current LED Driver AC DC Converter Topology 2 Output from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
Since it's made for the Vesta series the changeable cct or can I run a normal normal meanwell driver ? Or is there a driver or drivers you would recommend with this 20 strips ?
Where can I find the vesta test thread ?
I appreciate your knowledge truly
I will be running the light in a 4x4 enclosure. The strips is 56cm so I'm thinking of putting 2 on a sink to make 112cm to get a better coverage
Found the post thanks brother
For gen 3 tests go check the other thread mentioned, id expect the 4k 80cri to be about 10% more efficient in ppf/photons than 2700k 90cri tested.Bridgelux Vesta strips tuning?
Has anyone tuned their 27K - 5K Bridgelux strips & how do you tune your Vesta strips? I want to use BXEB-TL-2750G-3000-A-13 strips, but I want to be able to tune the strip to 4000K for a clone veg light. The only way I can find to do this is use the Bridgelux BXCS-1224B-N2A-01-A Bluetooth...www.rollitup.org
Lol all my questions answered by you thanks brother I appreciate it and thank you for sharing your knowledge
It was easy for me to get them here in the US. Shipping was expensive but they have discounts for overseas buyers. There is also a RIU discount code and significant discount for quantities over 1 or 2 strips.Thank you for your recommendation. It's a pity that purchasing GLA from Australia is difficult for me because I am not in Australia.
If there's an opportunity, I would try to purchase some
And this is additional information as a follow-up to my previous response
Vesta™ Tunable Linear Gen 3, 80CRI ： https://www.digikey.com/en/products/detail/bridgelux/BXEB-TL-L0560Z-2750E2000-A-C3/13181796?s=N4IgTCBcDaIEIA0CicC0AVAMqzAGArAGy4BaqYA7PrkmLvagIKoDCAzCALoC+QA
Vesta Gen1：https://www.digikey.com/en/products/detail/bridgelux/BXEB-TL-2750G-3000-A-13/7899252
Thank you again
Not to mention that most people see the price and think its USD when its the relatively light weight Ozzie-g'day-mate dollar.
Estimated and at board level. And to 2.7 not 7 but assuming its a typo. And remember this would be at full power, drop down to 200w it would be 250mA per channel with both channels on. Now i cant remember if its 12 or 14 parallel strings per side but that means each diode is getting 20 or less mA, making reasonable assumptions on diode voltage. If something different then we would still be along those power levels in watts, about 0.06w per diode. Which is really really low.This means that when the channel current on each light strip is adjusted to 350mA, it provides a photosynthetic photon flux within the range of approximately 2.6 to 7 PPF/W, I would like to confirm if my understanding is correct?
Thank you for your response. I apologize for the mistake in my input; it should be 2.7.
Yeah but how would you lay out all those strips i cant see them fitting in or any good driver solutions. Remember im doing 4 strips in series, youd need to go down to 24 but then how would you lay that out in a sensible way with 6 string of 4?
