=Butane Honey Oil= first test batch

cHiEf04grwer

cHiEf04grwer

Well-Known Member
Well i didn't have the exact piping i was looking for, but it worked extremely well. The main thing i had a problem with was after the oil got cool and harden it was alot harder to scrap off the side angles, i should of used a bigger dish.

I used high quality clippings from bud and used only about 3 grams total. You can see what I got out of it from the pics.

Very Very simple and didn't require alot of money or equipment to make either!
 

Attachments

odin92681

odin92681

Member
That oil looks good. I have some friends that make it and put it in vials. To soften it they heat it up in the vial or microwave it for 5 secs.
 
cHiEf04grwer

cHiEf04grwer

Well-Known Member
i ended up using the PVC, i bought a 2 feet of 1 1/4" and 2 end caps for like 3-4$ so i just wanted to give it a trial run. Im gonna buy the CPVC that you were talkin about, im gonna make lots more. I just gotta find a place where i can get several cans of refined butane. I was really pleased with the final product tho, I let that bong pack dry out till midnight last nite then took it, my head was spinning from caughing so hard. Definately not used to the potency. Any suggestions as to how i should collect the oil after the butane is evaporated?
 
torontoone

torontoone

Well-Known Member
I collect it into a pyrex measuring cup, then put in in a double boiler on the stove
(AFTER the bulk of butane has evaporated outside) to cure it. It can take a while for
all the tiny bubbles to dissipate.

Also, it's safer as you cannot exceed the 212 degree mark , since THC starts to degrade
at 250 deg. Since the product is heated, it's also less viscous , and easier to work with/package.



PS - make your tube out of 1" - and only 1 1/2' long. Uses less material, and the butane flows better.

PRO - TIP - Use a gold screen coffee filter for your filter- just cut the screen to fit, permanent- effective !!
 
torontoone

torontoone

Well-Known Member
I extract straight into a Pyrex Cup. (Just hold your tube down in it.)

When you put the cup into the double boiler, the heat makes all the stuff on the sides melt an run down to the bottom !
 
Supgee3

Supgee3

Well-Known Member
torontoone said:
I extract straight into a Pyrex Cup. (Just hold your tube down in it.)

When you put the cup into the double boiler, the heat makes all the stuff on the sides melt an run down to the bottom !
Click to expand...
Nice idea man, I didn't think about that and I had a problem with getting all my BHO from the sides of my pan and stuff.

+rep for that
 
cHiEf04grwer

cHiEf04grwer

Well-Known Member
Nice... do you add any water or anything to it? or the water from the double boiler is enough the temp reaches 212degrees your sayin and thats straight? im gonna go today and get CPVC at a foot and a 1/2 at 1" and try to find the cleanest butane i can.
 
torontoone

torontoone

Well-Known Member
well you put water in the double boiler, not in the BHO. Then you set your pyrex containing your oil in the pan.
Make sure you do this AFTER most of the butane has already boiled off - so there's no explosion !
 
cHiEf04grwer

cHiEf04grwer

Well-Known Member
torontoone said:
well you put water in the double boiler, not in the BHO. Then you set your pyrex containing your oil in the pan.
Make sure you do this AFTER most of the butane has already boiled off - so there's no explosion !
Click to expand...
So the pyrex containing the oil is gonna sit in the top empty pot of the double boiler. does pvc really leach into your oil?
 
R

razoredge

Well-Known Member
I like to have mine drip into water and then use a spoon and collect it out of the water so it gets a final flush
 
cHiEf04grwer

cHiEf04grwer

Well-Known Member
nikk said:
no guy,what he means is the pyrex with the BHO sits in a pan full of water...get it?
Click to expand...
yea i was a lil baked and wasnt quite getting it, as it was clearly obvious.. but yea, after u boil it down, how can you collect it from the bottom of the cup? is it liquidy enough to pour still?
 
cHiEf04grwer

cHiEf04grwer

Well-Known Member
ok so i just made 10g's worth of trim and got .5 .6 worth of oil didn't seem do work quite as well this time.
After i collected all the oil, i put it in a shot glass. Question is now how am i suppose to get it all out?
 
Corn Fed 69

Corn Fed 69

Member
cHiEf04grwer said:
ok so i just made 10g's worth of trim and got .5 .6 worth of oil didn't seem do work quite as well this time.
After i collected all the oil, i put it in a shot glass. Question is now how am i suppose to get it all out?
Click to expand...
I use a dental paddle i found at the army navy store. I just made my first batch of BHO I used 1 OZ G-13 bud, 1 OZ of Purple Cola Trinity suggar leaf [ looks like frosted flakes of green ] , ran 2 cans of vector through and got 3.7g of finished mind blowing product. this shit fucks me up no pain all day yipie hippy.:spew:bongsmilie
 
cHiEf04grwer

cHiEf04grwer

Well-Known Member
torontoone said:
I collect it into a pyrex measuring cup, then put in in a double boiler on the stove
(AFTER the bulk of butane has evaporated outside) to cure it. It can take a while for
all the tiny bubbles to dissipate.

Also, it's safer as you cannot exceed the 212 degree mark , since THC starts to degrade
at 250 deg. Since the product is heated, it's also less viscous , and easier to work with/package.



PS - make your tube out of 1" - and only 1 1/2' long. Uses less material, and the butane flows better.

PRO - TIP - Use a gold screen coffee filter for your filter- just cut the screen to fit, permanent- effective !!
Click to expand...
is 1 inch in diameter is big enough for the CPVC pipe? I went to lowes to buy it and the biggest in diameter that they carry is 1" it just doesn't seem like that is big enough.

I was also wondering about the types of butane to use, i know there are lots of types that they say not to use but I was wondering if the Zippo brand is alright.
 
erkelsgoo420

erkelsgoo420

New Member
Vector power and ronson In that order. 1 inch and 1.5 ft long u should do about 1 1/2 ounces and 10-12 oz of butane (500-600ml?) Each time. But yea 1 inch is fine
 
You must log in or register to reply here.
Top