Humboldt
Well-Known Member
The following is a cheap and easy way to make your own powder hash from your leaf/trim better known as keif (keef keaf ) I came up with this setup one night as I was getting high and eating some Pringles, before I was using a bulky coffee can that required two hands, this setup that I'm about to show you is much easier and preferred by me.
Note: there are several methods of doing the exact same thing, however this method is most convenient for me.
Ingredients,
What you will need is,
1. At Least Half a Brain.
2. Some Weed - leaf/trim (big time growers are able to use straight bud) this method I use trim.
3. Pringles can with lid (also able to use tennis ball tubes, basically what ever you can come up with to make work)
4. Some weight to break up the weed as you shake ( I use 4 quarters - one dollar, seems to be around the right weight and is easy to keep track)
5. Old T-shirt (cotton preferred, also able to use, silk or panty hose better known as silk screening)
6. Cutting tool - Sharp knife or razor blade (to cut out lid)
7. Rubber band (for securing the shirt to can, or you can just hold it)
8. Scraper of some sort (old phone card works great)
9. Clean smooth service (large piece of glass, or mirror works well)
10. Surgical mask (totally optional) you will notice lots of particle floating around and I'm thinking it's probably not a good idea to inhale it, if you do not have a proper mask you can always hold your breath, no really use another T-shirt, Scarf or something you can rap around your mouth and nose, if you must shake holding your breath be sure to breath in from your nose and out from your mouth when you do breath, bottom line is try not to breath so much of it.
Step 1. Take the lid of your Pringles can, or whatever you decide to use, cut out top but be sure to leave a slight rim, after you cut your lid make sure it fits back on the container snug without slipping through, it's going to have to fit over the shirt.
Note: it may take you a few attempts, so you may want to have several containers and or lids on hand.
Should look something like this,
Step 2. Take your T-shirt, or pantyhose and cut out a small square or circle approx. 10" by 10"
(New shirt Not used only example)
Should look something like this,
Step 3. Get everything ready as in your glass, bag of weed, container, lid, t-shirt, rubber band and weights.
Take your weed, approx. amount shown in image bellow, quarters and put them in container (be sure to remove big bulky stems) place the shirt over top of container, put on lid and once the lid fits snug without slipping off rap the excess of the shirt around container securing it with the rubber band. (or you can just hold it)
Should look something like this,
Start shaking down to the glass, repeat this process as many time as it takes for the amount you want, after shaking for a bit you will then see the glass covered with powder, scrape the powder into one pile with the scrapper of your choice (I use old phone card) you will want to remove the little foreign particles such as hairs/fuzz, you can do this with a magnifier or with your eye, after doing so you can store your powered in a film or pill container .
(The pile you see only took two shakes - refills)
End results, ready to smoke, you can smoke the powder by sprinkling a little over some trim to keep it from falling through wasting it, or can compact the powder by over lapping a couple of sandwich bags, placing the powder in the middle wrapping the bag around shaping it into a ball, after twisting tight place the pall into a vise of sort, or place under heavy object (washer or dryer works good) let it sit for at least 24 hours, the longer the better.
After 24 hours or so remove the now flatten ball, take off the wrapping, pinch of a chunk and enjoy!
If you are worried about waste, try the following method,
Take a five gallon bucket tie a shirt around the top making sure the shirt hangs down the bucket approx. half the bucket length, clean a bunch of weed (stems and such) put it in the shirt/bucket then start breaking up the weed by mashing, moving it around with your hands/finger, the particles will fall nicely into the bottom of the bucket.
You won't waste as much and you are able to do lots at a time. if you are lazy or don't have much time, you could always use an old rotisserie machine and a coffee can, although I've never tried this method, it's out there, if interested do a search.
.:UPDATE:.
Poor Mans Keif Compacter!
Wrap & Roll Into Ball, place under one leg/peg of washer let sit for at least 24 hours, be sure to shake enough so that you have some powder to smoke while waiting,
Before
After
Done Deal!
Im smoking that lil peice right now.
I used a little over a quarter ounce of trim for that pellet.
Note: there are several methods of doing the exact same thing, however this method is most convenient for me.
Ingredients,
What you will need is,
1. At Least Half a Brain.
2. Some Weed - leaf/trim (big time growers are able to use straight bud) this method I use trim.
3. Pringles can with lid (also able to use tennis ball tubes, basically what ever you can come up with to make work)
4. Some weight to break up the weed as you shake ( I use 4 quarters - one dollar, seems to be around the right weight and is easy to keep track)
5. Old T-shirt (cotton preferred, also able to use, silk or panty hose better known as silk screening)
6. Cutting tool - Sharp knife or razor blade (to cut out lid)
7. Rubber band (for securing the shirt to can, or you can just hold it)
8. Scraper of some sort (old phone card works great)
9. Clean smooth service (large piece of glass, or mirror works well)
10. Surgical mask (totally optional) you will notice lots of particle floating around and I'm thinking it's probably not a good idea to inhale it, if you do not have a proper mask you can always hold your breath, no really use another T-shirt, Scarf or something you can rap around your mouth and nose, if you must shake holding your breath be sure to breath in from your nose and out from your mouth when you do breath, bottom line is try not to breath so much of it.
Step 1. Take the lid of your Pringles can, or whatever you decide to use, cut out top but be sure to leave a slight rim, after you cut your lid make sure it fits back on the container snug without slipping through, it's going to have to fit over the shirt.
Note: it may take you a few attempts, so you may want to have several containers and or lids on hand.
Should look something like this,
Step 2. Take your T-shirt, or pantyhose and cut out a small square or circle approx. 10" by 10"
(New shirt Not used only example)
Should look something like this,
Step 3. Get everything ready as in your glass, bag of weed, container, lid, t-shirt, rubber band and weights.
Take your weed, approx. amount shown in image bellow, quarters and put them in container (be sure to remove big bulky stems) place the shirt over top of container, put on lid and once the lid fits snug without slipping off rap the excess of the shirt around container securing it with the rubber band. (or you can just hold it)
Should look something like this,
Start shaking down to the glass, repeat this process as many time as it takes for the amount you want, after shaking for a bit you will then see the glass covered with powder, scrape the powder into one pile with the scrapper of your choice (I use old phone card) you will want to remove the little foreign particles such as hairs/fuzz, you can do this with a magnifier or with your eye, after doing so you can store your powered in a film or pill container .
(The pile you see only took two shakes - refills)
End results, ready to smoke, you can smoke the powder by sprinkling a little over some trim to keep it from falling through wasting it, or can compact the powder by over lapping a couple of sandwich bags, placing the powder in the middle wrapping the bag around shaping it into a ball, after twisting tight place the pall into a vise of sort, or place under heavy object (washer or dryer works good) let it sit for at least 24 hours, the longer the better.
After 24 hours or so remove the now flatten ball, take off the wrapping, pinch of a chunk and enjoy!
If you are worried about waste, try the following method,
Take a five gallon bucket tie a shirt around the top making sure the shirt hangs down the bucket approx. half the bucket length, clean a bunch of weed (stems and such) put it in the shirt/bucket then start breaking up the weed by mashing, moving it around with your hands/finger, the particles will fall nicely into the bottom of the bucket.
You won't waste as much and you are able to do lots at a time. if you are lazy or don't have much time, you could always use an old rotisserie machine and a coffee can, although I've never tried this method, it's out there, if interested do a search.
.:UPDATE:.
Poor Mans Keif Compacter!
Wrap & Roll Into Ball, place under one leg/peg of washer let sit for at least 24 hours, be sure to shake enough so that you have some powder to smoke while waiting,
Before
After
Done Deal!
Im smoking that lil peice right now.
I used a little over a quarter ounce of trim for that pellet.
