Clones ??!?

W

WaterDog

Well-Known Member
I'm taking rooted clones from mister into hydroton under HLG550 Any advise on light distance and maybe something to help with initial shock to give plants a little help until established into ebb and flow buckets?

Thanks guys
 
Delztronics

Delztronics

Well-Known Member
WaterDog said:
I'm taking rooted clones from mister into hydroton under HLG550 Any advise on light distance and maybe something to help with initial shock to give plants a little help until established into ebb and flow buckets?

Thanks guys
Click to expand...
Start at 36" inches with your lamp dialled way back. Keep a close eye on them for the first little while (3 days or so for hardening off) dial up and change the lamp distance when necessary.
 
W

WaterDog

Well-Known Member
Delztronics said:
Start at 36" inches with your lamp dialled way back. Keep a close eye on them for the first little while (3 days or so for hardening off) dial up and change the lamp distance when necessary.
Click to expand...

Ah cool, I started there I didn't realize I could turn down the lights. I'll take a closer look. Thanks
 
coreywebster

coreywebster

Well-Known Member
As a precaution you can hand water the hydroton from your res for a few days too. Just to ensure there is no drying of roots.
What system is it? Does it fill bottom up then drain?
 
W

WaterDog

Well-Known Member
coreywebster said:
As a precaution you can hand water the hydroton from your res for a few days too. Just to ensure there is no drying of roots.
What system is it? Does it fill bottom up then drain?
Click to expand...
Im using 1 gallon ebb and flow and a 55 gallon res. Yes I'll be hand watering for at least a week. My clones are looking pretty shitty not sure how to give them a boost other than time to strengthen up a bit.

Thanks
 
coreywebster

coreywebster

Well-Known Member
WaterDog said:
Im using 1 gallon ebb and flow and a 55 gallon res. Yes I'll be hand watering for at least a week. My clones are looking pretty shitty not sure how to give them a boost other than time to strengthen up a bit.

Thanks
Click to expand...
A bit of kelp might help. Nothing that is fert and kelp though, sometimes its hard to tell if your buying kelp of a fert with added kelp.
I would re-sterilise your res at a later date.
 
Last edited:
W

WaterDog

Well-Known Member
coreywebster said:
A bit of kelp might help. Nothing that is fert and kelp though, sometimes its hard to tell if your buying kelp of a fert with added kelp.
I would re-sterilise your res at a later date.
Click to expand...

Kelp? Recommend a brand? I gotta do something asap maybe throw away and start over from cloner. They look great there.

Any advise is greatly appreciated.
 

Attachments

coreywebster

coreywebster

Well-Known Member
WaterDog said:
Kelp? Recommend a brand? I gotta do something asap maybe throw away and start over from cloner. They look great there.

Any advise is greatly appreciated.
Click to expand...
Any brand from local garden store, kelp is kelp is kelp. Im English so brands will be different to yours.
But I think you got some issues there dude.
What you feeding them? What EC?
With my limited experience with ebb and flow pods hydroton can dry out real quick.
Are you sure the roots are getting wet? Res is right temp and lots of o2? Ph correct?
How often are they filling up?
 
W

WaterDog

Well-Known Member
I'm thinking my res is a little hot 80. ph is 5.9 ppm is 480 I'm watering every few hours currently until roots establish enough for roots to get wet. I'm wondering if shock from cloner under T-5s in this system under the 550 is stressing them as well I have them almost 4 feet about plants. I have tons of great looking clones so I may start over once mini split installed

Thanks
 
You must log in or register to reply here.
Top