CLU058 vs CXB35900
- Thread starter PCXV
- Start date
PCXV
Well-Known Member
Explain?
PCXV
Well-Known Member
Ok will do, thanks. Ive slowly been building up my nute regimem every grow. Last grow I was feeding 1.2-1.4 EC (every 3 days or so in soil) in the peak of bloom. It still seemed a little shy of full nutrition, thinking of bumping it up slightly next grow. Currently I have 4 seedlings under t5s.
sleepless_canuck
Well-Known Member
I just fired up my 4 x 1825s in a 3x3.
They started eating themselves fast.
Had to up my nutes.
They started eating themselves fast.
Had to up my nutes.
PCXV
Well-Known Member
Forgot to ask if I needed any of these before placing my order: http://cobkits.com/product-category/wiring/
Also, I am in soil using DG Foliage Pro, Protekt, and add 1/4-1/2 DG Bloom nutes in the peak of bloom. All added to tap water and phd to 6.4-6.8 and an EC from 0.8-1.4. My tap water has an EC of 0.2-0.4. With these cobs, do you think I will need to add calcium (cal/mag or similar)?
Last edited:
PCXV
Well-Known Member
Can you add 4x 5-pole wagos to my order if it's not too late?
bassman999
Well-Known Member
Wagos are the way to go.
PCXV
Well-Known Member
You rock thanks!
Godfather420
Well-Known Member
Curious, why 10"? It would seem on a 3x3 layout that you would get better spread on something closer to 14-16" would help with the center hot spot.. The reason why i ask is I'm working on a similar build... Only I'm doing multiple lights that will overlap beams...
have question
i want to to upgrade my plant area from 2 plants/60w 200+ led's 4 type led bulb (red/blu uv ir)
to cca 1meter by 1 meter
how many cxm 22 i need ?
and what else ?
mean well hlg-185h-48v for power (how many i need)?
drivers ? which one is good for that light ?
how to connect ?
is this one for plants (3000k) for full grow circle ??
http://www.digikey.be/product-detail/en/luminus-devices-inc/CXM-22-30-95-36-AC00-F2-3/1214-1262-ND/4988721
or to pick some of
http://www.digikey.de/products/en?keywords=CLU058
but which one i need for full grow circle ?
sorry for too many questions ,but more i read i know less ..
and this post is very nice with explanations
so thanks if someone can help
i want to to upgrade my plant area from 2 plants/60w 200+ led's 4 type led bulb (red/blu uv ir)
to cca 1meter by 1 meter
how many cxm 22 i need ?
and what else ?
mean well hlg-185h-48v for power (how many i need)?
drivers ? which one is good for that light ?
how to connect ?
is this one for plants (3000k) for full grow circle ??
http://www.digikey.be/product-detail/en/luminus-devices-inc/CXM-22-30-95-36-AC00-F2-3/1214-1262-ND/4988721
or to pick some of
http://www.digikey.de/products/en?keywords=CLU058
but which one i need for full grow circle ?
sorry for too many questions ,but more i read i know less ..
and this post is very nice with explanations
so thanks if someone can help
Kaneh_bosm
Well-Known Member
Can I run (3) of your cxm 22 light engines in my 3x1.5 with hlg 185 48a? 2 plants I have 5' of height. How would I cool them?
CobKits
Well-Known Member
yes youd want (3) 133 mm heatsinks
i almost didnt see this, this isnt my thread, i hang out over here
https://www.rollitup.org/t/introducing-cobkits-com-specializing-in-diy-and-citizen-cobs.916763/
Kaneh_bosm
Well-Known Member
Good looking out! This can be so confusing! OK the decision is made.
The 90 CRI 1818 seems to have the most "red" for the $ - or am I reading these charts wrong?
What about Luminus CXM 22 ?
Below 100w for the price, definitely.