Club 315w lec

gr865 said:
Can the ballast be separated from the lamp?
Click to expand...
PJ Diaz said:
That looks sweet, but not sure I like the idea of ballasts built into the hood, I prefer remote. Also are the ballasts themselves any good?
Click to expand...
Yes. But it requires a complete disassembly - removing inner reflector to gain access.
Can't speak for reliability or quality of ballast. Not a huge risk when a 315cmh ballast alone cost is $100+.
The biggest draw for me was the 18x18 opening, and vertical bulb. They run really cool.
 
I always look at the heat of the ballast, being able to separate the ballast from the lamp is critical especially in a vertical grow, which is my major type of grow.
 
gr865 said:
I always look at the heat of the ballast, being able to separate the ballast from the lamp is critical especially in a vertical grow, which is my major type of grow.
Click to expand...
Neat. When growing vertical, do you also use these vertical sockets?
hydrobuilder.com

Phantom 315 Watt CMH Vertical Hanging Grow Light Kit

Buy the Phantom 315 Watt CMH Vertical Hanging Grow Light Kit at Hydrobuilder.com. Shop the entire line of Phantom products along with thousands of hydroponics supplies on sale now.
hydrobuilder.com hydrobuilder.com


CMH Socket Set - PGZ18 Base | HTG Supply

The HYL CMH socket set – a quick, clean, and cost-effective solution for retrofitting existing grow light reflectors / hoods with CMH. Get it now at HTG Supply, the #1 grow shop online!
www.htgsupply.com www.htgsupply.com
 
I used these bulbs (or the rebranded equivalent), IME they seem more prone to failure than Philips bulbs over time. I haven't had a philips bulb burn out and become unusable. I'm sure it happens, but with these it happened twice to me. maybe it was just bad luck. One of them burnt out after only 3600 hours of use :/
Anyway, I'm not trying to sound like a party pooper. My experience is just anecdotal. Maybe someone else can chime in. 315 bulbs from different manufacturers all performed quite similarly in the tests I've seen.
 
TintEastwood said:
Neat. When growing vertical, do you also use these vertical sockets?
hydrobuilder.com

Phantom 315 Watt CMH Vertical Hanging Grow Light Kit

Buy the Phantom 315 Watt CMH Vertical Hanging Grow Light Kit at Hydrobuilder.com. Shop the entire line of Phantom products along with thousands of hydroponics supplies on sale now.
hydrobuilder.com hydrobuilder.com


CMH Socket Set - PGZ18 Base | HTG Supply

The HYL CMH socket set – a quick, clean, and cost-effective solution for retrofitting existing grow light reflectors / hoods with CMH. Get it now at HTG Supply, the #1 grow shop online!
www.htgsupply.com www.htgsupply.com
Click to expand...

I just take the Nanolux lamp apart and use it, I bought two of the cables like the ones in the Phantom Kit, but just the cable for my assistant.
 
I just picked up a 4x8x6.5 tent for flower only and need to grab some lighting. Also, I need to keep heat down as I don't want to run AC.
Right now, running 620w of Aglex lighting and tent is getting up to 81 with exhaust running full blast. Problem is....thats only lighting one half of the tent. Once I have the tent full on both sides...I'd never be able to cool it down.
So, I've been considering all options and am leaning to CMH because they seem to work well and cheaper than quality LEDs. I'm trying to keep my costs down to keep the wife off my case lol.
I was looking at the SilberStar 315 vertical hood with the separate ballast and Philips 3100 bulb for about $400 delivered.
www.growlights.ca

Square Wave 315W CMH SilverStar Fusion Bright Ballast System

The Silverstar CMH 315W reflector is the latest innovation in the Silverstar line and is designed for Ceramic Metal Halide technology. Like all the Silverstar products, this reflector is made from highly reflective German textured aluminum for excellent light uniformity and diffusion. It has a...
www.growlights.ca www.growlights.ca

Figured I would get two and watch the heat. If it's manageable...get a third one and have a decent light overlap. Or I could throw in a one of my LEDs in between them with only the bloom switch running.
I'm running a 6" AC infinity fan and 6" carbon for exhaust. Also have a 6" fan for intake when it gets too hot.
Any idea of how much heat buildup I can expect with 2 or 3 in a tent this size?
 
Never had a 4 x 8, only 4 x 4's.......But I'd think with a few variable speed fans in there you would be fine. Ummm.....negative pressure is best, if using a 6" exhaust (I use one in a 4 x 4) Id use a 4" intake fan.....you want more exhausting, ideally. For a 4 x 8 tent Id want bigger then a 6" Exhaust.....

8" exhaust and then utilize the 6" intake. Another config
 
Couch_Lock said:
Never had a 4 x 8, only 4 x 4's.......But I'd think with a few variable speed fans in there you would be fine. Ummm.....negative pressure is best, if using a 6" exhaust (I use one in a 4 x 4) Id use a 4" intake fan.....you want more exhausting, ideally. For a 4 x 8 tent Id want bigger then a 6" Exhaust.....

8" exhaust and then utilize the 6" intake. Another config
Click to expand...
Thanks Couchlock. Exactly another issue I'm having. I'm getting positive pressure because even with the 6in intake dialed down to the lowest speed...it's pushing more than the 6" with carbon filter can exhaust. I have a 4" that I can try in place...or one of those 6" duct fans.
I'll probably have to switch up to an 8" but it'll have to wait until spring so I can do the venting work at the wall.
 
Ive had a rough start myself this winter.....had used my CMH's previously last Jan, bought an HLG 550 V2 Rspec last summer and that 2nd 2019 run was pretty good.

So I started my Jan 2020 grow (I live almost as far north as Canada) with the LED......in a 63 degree cellar Ive seen average temp highs at 71....thats not enough, the stems are spindly AF so far. So, I unplugged the LED light and tossed in a CMH.....my humidity rose 10% in 3-4 minutes......temp rose 4 degrees in that time frame also (keeping the ballast IN the tent for warmth).

Plants are about 9-10 days old.
 
Make sure you can separate the Ballast from the lamp.
I run 2 Nanolux 315's, have the ballast outside my 4 x 4.
This makes any heat issues mute.
 
Couch_Lock said:
Ive had a rough start myself this winter.....had used my CMH's previously last Jan, bought an HLG 550 V2 Rspec last summer and that 2nd 2019 run was pretty good.

So I started my Jan 2020 grow (I live almost as far north as Canada) with the LED......in a 63 degree cellar Ive seen average temp highs at 71....thats not enough, the stems are spindly AF so far. So, I unplugged the LED light and tossed in a CMH.....my humidity rose 10% in 3-4 minutes......temp rose 4 degrees in that time frame also (keeping the ballast IN the tent for warmth).

Plants are about 9-10 days old.
Click to expand...
I've got mine in a basement bedroom but I have a furnace duct that I can open if needed to warm room in winter. But I've got it right closed now.
In the summer I have central air which helps but if I turn up the air too high then other in the house are complaining it's too cold. Lol
 
You must log in or register to reply here.

Similar threads

T
SCROG Royal Queen seeds, Honey Cream, Special Queen, Cheese in Coco with DIY GLA strips and 315w LEC
Replies
2
Views
454
The Bodgeineers
T
shotnva777
New 5x5x7ft Tent and 315w CMH
2 3
Replies
56
Views
4K
shotnva777
shotnva777
N
Legalization - I can grow again!
2 3
Replies
46
Views
4K
FmSwayze
FmSwayze
M
HELP - 1st time growing in DWC = Multiple mixed signals issues.
Replies
1
Views
192
HydoDan
HydoDan
botanybandit
First Perpetual grow questions.
Replies
18
Views
3K
Jonny Jetson
Jonny Jetson
Back
Top