Club 600

Guzias1 · Apr 13, 2013

method2mymadness said:
Did u jb weld right away or later on I think ime going to jb weld now just got.all new equipment same chamber New pump etc oil slick pads slick balls etc

hhaa, mannnnnnnnn, when i got this, i wasnt confident in the joints..

i tested one vacuum in it over night, just a test run, no material, i woke up and the thing lost half its vac..

SO, went to auto store, spent a lot of time looking at specs on all the epoxies... well, JB weld blasted all of them out of the water.. :]

plenty of heat rating, i welded up the handled fittings as you can tell, no shame in appearance :]

the part with the valve, i just reallyyy tightened up, its got taped wrapped across the threads already, and i feel the tape was good, but i sure was able to snug her up quite a bit more..

i gots a small 3cfm pump, takes about 10 minutes or so to reach a full vac to where i can close her off the chamber..

slick pads slick balls? lolll what the hell

kiss-assParchment Paper

whodatnation · Apr 13, 2013

That fucking sucks method :-(

DrKingGreen · Apr 13, 2013

Sorry about your pup man. I don't know what I would do without my boy.

As for the jar method... Would I really have to use keef with that method or could I still use trim? Also, don't you think it's a little dangerous without a hole on the other end to release pressure? Maybe I could use a diamond tip and drill the proper size hole on the bottom of the jar, then use the other side as a filter so no built up pressure would occur

jigfresh · Apr 13, 2013

Thats a real shame m2m. I'm sorry you lost your friend.

whodatnation · Apr 13, 2013

Why not just smoke the keif?

:peace:

Guzias1 · Apr 13, 2013

method2mymadness said:
Well today was fucked up had to put my rott down sick feeling going to the vet and leaving with a collar and leash no friend on the leash

im sorry to hear that method.. hope the best for you. keep that collar and a good place..

method2mymadness · Apr 13, 2013

Thanks guys he was just getting old had hip problems and got sick really swollen over night just weird talked with the vet and instead of him suffering had him put down I didn't want to but dnt want him to be in pain and uncomfortable for my.selfish reasons of just not wanting to let go they said it was the best thing and I did all I could do for him

DoobieBrother · Apr 13, 2013

jigfresh said:
Hey CC... I won't mention to anyone you are running a 1000 in there.

That's 1000w of power using the metric system, so really, it's 600w when you convert it to USA wattage.
;-)

method2mymadness · Apr 13, 2013

Guzias1 said:
hhaa, mannnnnnnnn, when i got this, i wasnt confident in the joints..

i tested one vacuum in it over night, just a test run, no material, i woke up and the thing lost half its vac..

SO, went to auto store, spent a lot of time looking at specs on all the epoxies... well, JB weld blasted all of them out of the water.. :]

plenty of heat rating, i welded up the handled fittings as you can tell, no shame in appearance :]

the part with the valve, i just reallyyy tightened up, its got taped wrapped across the threads already, and i feel the tape was good, but i sure was able to snug her up quite a bit more..

i gots a small 3cfm pump, takes about 10 minutes or so to reach a full vac to where i can close her off the chamber..

slick pads slick balls? lolll what the hell

kiss-assParchment Paper

Well ur supposed to jb weld thos rivets the company said ...and oil slick balls are non stick concentrate containers oil slick pads. Are a non stick pad that will take place of ur parchment u can even blast straight on to them for nothing is lost from scraping.dish look up oil slick pads on YouTube and oil slick balls

cannabiscult · Apr 13, 2013

lol thanks doobie i cheatedlol sorry method bud thats a bummer man, il keep you in the thoughts when im smoking brother.

dr. yes youre correct it is a tad dangerous but i burp the jar as son as i feel the pressure build up.

method2mymadness · Apr 13, 2013

I have a 6 cfm master cool pump

method2mymadness · Apr 13, 2013

cannabiscult said:
lol thanks doobie i cheatedlol sorry method bud thats a bummer man, il keep you in the thoughts when im smoking brother.

dr. yes youre correct it is a tad dangerous but i burp the jar as son as i feel the pressure build up.

Fuck I never realized ur name was cannabiscult I thought was cannabiscut not cannabis-cult

DrKingGreen · Apr 13, 2013

cannabiscult said:
lol thanks doobie i cheatedlol sorry method bud thats a bummer man, il keep you in the thoughts when im smoking brother.

dr. yes youre correct it is a tad dangerous but i burp the jar as son as i feel the pressure build up.

What do you think about the drilling idea? I guess I could just say f it and put on a mask, thick clothing, gloves, safety glasses, and go your route... I'm just a bit scared lol. I saw a nasty accident in chem 2 my sophomore year and don't want to be on the same end of the stick as that girl! Don't remember what we were working with, but she did a reaction in a sealed container and glass went flying!

DoobieBrother · Apr 13, 2013

(just catching up with all the posts)
Sorry to hear about your friend , method.
They sure do leave a big empty spot in the heart when they move on to next level.

cannabiscult · Apr 13, 2013

yes yes yes.....cannabis CULT no biscuit but i guess thats ambers nick name for me lol anyway man i wouldnt get too scared, just wear all the protective gear and take it very very slow. the drill idea will work i just havnt done it.

Guzias1 · Apr 13, 2013

method2mymadness said:
Well ur supposed to jb weld thos rivets the company said ...and oil slick balls are non stick concentrate containers oil slick pads. Are a non stick pad that will take place of ur parchment u can even blast straight on to them for nothing is lost from scraping.dish look up oil slick pads on YouTube and oil slick balls

here is my experience with blasting onto that stuff...

P.S. dont blow yourself up people! .. ok now
[video=youtube;NIqGS50k6z0]http://www.youtube.com/watch?v=NIqGS50k6z0[/video]

i looked up the oil slick pad, in the video, is see the pad doing similar things, warping and what not.. i want to know if that pad will stay to its perfect form after 50 blasts..

http://www.youtube.com/watch?v=D-vpP-0Ivbw

genuity · Apr 13, 2013

nuts..^^^that was just nuts,but looks like you got your butter?

DrKingGreen · Apr 13, 2013

Was thinking about using this guys method but with a home made tube if I don't win my ebay bid. You guys seen it? Anything he does wrong I should know about?
http://www.youtube.com/watch?v=0SHxMD2D0K4

billcollector99 · Apr 13, 2013

jigfresh said:
I use a mason jar with a hole in the lid to vaccum purge.

DUDE... you guys and your food. GRRRRRRRRRRR

Just in case you werent hungry already

cannabiscult · Apr 13, 2013

same butane i use

Club 600

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Similar threads