CROP #2 using bubbles

nitro harley said:
Good morning dbkick........

I am into day 43 of bloom right now....we will have to see how this week goes...maybe just 4-5 days left.......nitro...
Click to expand...

hey nitro. I'm right behind you buddy by a couple weeks but this chemdawg seems to finish up pretty fast. And I'm getting better with the camera I think, got the software to control it on the laptop now so my photo skillz SHOULD improve.
 
nitro harley said:
I went out to the shop this mornning and I can smell something electrical in the air....I think it is comeing from my UFO 90w LED light....

I cleaned the dust of the screen where the fans are...but now I am nervus........I will have to baby sit the shop until I figure out whats happening.......nitro.........
Click to expand...

yeah, keep am eye on that for sure.
 
dbkick said:
yeah, keep am eye on that for sure.
Click to expand...

I can still smell something...I walked out side and my truck is white...it doesn't snow here very often...then I looked at the weather and looks like she is gonna blow...wednesday gust to 70+mph...I am going to fill my gas can for the generater.......nitro...
 
My lights came on and I could still smell something electrical....and I found my problem, my wielding plug in got hot and started melting for my 220 service...I turned my lights off and switched my ballast's over to 110 and pluged two lights back in...at least I have two lights going instead of none...I can get parts tomorrow.....I am just glad I found it while I was home..........nitro....
 
It looks like my roots had some root rot in 4 of my buckets...they were pretty full of roots...but the plants did all right...I cherry picked about what I think is going to be a pound and a half of nice bud...then I gave the rest to my card holding brother...he was happy...

I will be getting things cleaned up today and deal with my clones....

I will take better bud pic's later....
 

Attachments

  • DSC02550.jpg
    DSC02550.jpg
    81.9 KB · Views: 42
  • DSC02551.jpg
    DSC02551.jpg
    81.7 KB · Views: 40
  • DSC02552.jpg
    DSC02552.jpg
    76.4 KB · Views: 38
  • DSC02555.jpg
    DSC02555.jpg
    84.1 KB · Views: 37
  • DSC02556.jpg
    DSC02556.jpg
    54.7 KB · Views: 49
  • DSC02557.jpg
    DSC02557.jpg
    78.1 KB · Views: 36
  • DSC02558.jpg
    DSC02558.jpg
    66.1 KB · Views: 35
I just started a new thread.....for crop #6....When my buds finnish drying I will post some pic's and info here......nitro....
 
My bud is in the jar's there was 27 Oz's total....that comes to four and one half Oz's per plant....this is the worst I have ever done for volume......but we are still happy...at one point in the grow I thought they were going to die so we did alright......nitro....


Here's some bud pic's....
 

Attachments

  • DSC02725.JPG
    DSC02725.JPG
    279 KB · Views: 29
  • DSC02727.jpg
    DSC02727.jpg
    73.9 KB · Views: 22
  • DSC02729.jpg
    DSC02729.jpg
    104.9 KB · Views: 23
  • DSC02733.JPG
    DSC02733.JPG
    206.5 KB · Views: 20
  • DSC02736.jpg
    DSC02736.jpg
    125.5 KB · Views: 18
  • DSC02740.JPG
    DSC02740.JPG
    254.5 KB · Views: 16
  • DSC02741.JPG
    DSC02741.JPG
    225.8 KB · Views: 12
  • DSC02742.jpg
    DSC02742.jpg
    54.9 KB · Views: 12
  • DSC02748.jpg
    DSC02748.jpg
    43.3 KB · Views: 11
  • DSC02751.jpg
    DSC02751.jpg
    87.9 KB · Views: 11
i got 24-25oz off two 600W, that's nearly what you got off 4KW! I am a bit confused but the pics look amazing. Maybe some LST next time and keep a twice-daily accurate upkeep of water conditions: ph, ec (and don't forget water temp.:21-22). Hope the younger ones you FIMmed ridiculously early go well: contrary to a lot of info on pages earlier: FIMming is best done after 5-6 nodes and having done this for 30-35 grows with both indica and sativa dominant strains I can confirm this. Also I have done a test comparing FIMming once, twice and three time with the same pheno and twice produced the most (this test was done twice also)...i.e.: 1 main cola to 4/5/6/7/8....then LST and get 7-8 more and FIM all heads...this is the way I do it. And MOST IMPORTANTLY :) do not FIM or hst (high stress train) a week before flower because this tends to (for me) start the change while the plant is still recovering and the 'FIMmed' part will not be as well developed.

Hope this helps, good luck and you may get a shock with your next yield if you LST and/or FIM properly....no reason to get less than 100z off 4KW :) keep at it!
P
 
Hey paradigm....

We will have better production hopefully this time....but as long as I get 24 Oz's or more everything is good....That's what I am aloud to have.. anything more and I just give away....

This crop was fighting root rot right when I was going to "fim"...so I really didn't do much topping..just took some clones and that was it.......

Anyway Happy growing...........nitro.....
 
mjdudeist said:
nice buds nitro, i would +rep but i guess i already did cause it wont let me.
Click to expand...

Thanks mjdudeist.......

I am smokeing some right now....and I have to say It taste pretty good.....I wish I could share...maybe some day.........It kinda taste like hash with a skunky after taste..very strong odor..........nitro...
 
nitro harley said:
My bud is in the jar's there was 27 Oz's total....that comes to four and one half Oz's per plant....this is the worst I have ever done for volume......but we are still happy...at one point in the grow I thought they were going to die so we did alright......nitro....


Here's some bud pic's....
Click to expand...

Looks Like The Partys in Nitro Garage bongsmilie Very Nice Job Brother.And Reps For The Save.Peace And Hair Grease :peace:
 
You must log in or register to reply here.
Back
Top