Looks like a neat light Airwalker! I'll definitely take a closer look. I think my preference is for discrete diodes so I can smear the light over a larger area and not worry about point sources.
yes we will be supplying the new heatsinks with the kits ongoing, heatsinks in stock today, XPE photo reds are also in stockHi Mark, so as far as the MAU5 kits go, the awesome new black anodized HS14080P heatsinks aren't included yet is that right?
I'm assuming they haven't come in yet
Also might you have an estimate as to when these 660nm Cree XPE diodes will be back in stock?
(http://cutter.com.au/proddetail.php?prod=cut1868)
Thanks
I LOVE YOU!!!yes we will be supplying the new heatsinks with the kits ongoing, heatsinks in stock today, XPE photo reds are also in stock
Cheers
Mark
g'day Mark,Cheers
Mark
You can. You could put 5 on that one. Cobs would each run about 73-75 watts.g'day Mark,
Would this driver run 3 x 72v cxb3590 COBs @ 1050ma or do u have a suitable driver for 3 x 72v cxb3590 COBs @ 1050ma?
http://www.cutter.com.au/proddetail.php?prod=cut2999
No worries, I have added the solderless star option to the 430nm. We manufacture all the boards here so any colour, manuf led we have we can mount to any board option we have in stockI LOVE YOU!!!
Oh one more quick question, I was wondering of it possible to get this star (link below) in a solderless? I don't know how the solderless option works i.e. if that's something you do at Cutter or if you have to order them from the manufacturer like that, and if there is a minim order for something like that? Just curious because that particular one doesn't have a solderless option on the site.
Thanks for everything Mark!
Cutter-20STRC35L-UV430
yes you can, also our new 140mm x 80mm would cover 70 watts if you need a passive pin fin solutiong'day Mark,
Would this driver run 3 x 72v cxb3590 COBs @ 1050ma or do u have a suitable driver for 3 x 72v cxb3590 COBs @ 1050ma?
http://www.cutter.com.au/proddetail.php?prod=cut2999
Thanks mark,yes you can, also our new 140mm x 80mm would cover 70 watts if you need a passive pin fin solution
Cheers
Mark
Bare weight is 812 grams, these have a higher pin count and are very uniform in terms of heat distributionThanks mark,
How much do your new 140mm x 80mm heatsinks weigh?
Are these what you are shipping all the backordered kits with?Bare weight is 812 grams, these have a higher pin count and are very uniform in terms of heat distribution
Cheers
Mark
we have around 60 pcs of Mechatronix Clear anodised that will be used and then we start shipping the kits with the new 140mm blacksAre these what you are shipping all the backordered kits with?
This is why Cutter is so awesome!!No worries, I have added the solderless star option to the 430nm. We manufacture all the boards here so any colour, manuf led we have we can mount to any board option we have in stock
We have a youtube video showing how we manuf SL boards, we manufacture all LEDGROUP boards here
cheers
Mark
Hi, on the cutter site for the far red boards we have 'add 4 0ohms resistor" my question is :like airwalker said 1 x 3w diode at 700-1000ma per 4 sqft sounds about perfect. i mount mine to the ceiling now , with a tight lens like 20-45 degree.
- i ordered a bunch of stuff from Cutter to test out. 4up far red boards for cheap $11-12
cheaper, easier, and better than rapid led or steves
http://cutter.com.au/proddetail.php?prod=cut2202
$3.50 quad optic that works with their board
http://cutter.com.au/proddetail.php?prod=cut1000
driver: APC12-12 by meanwell for $6
stick it on with the Cutter die cut pressure sensitive TIM
http://www.cutter.com.au/proddetail.php?prod=cut952
You in the US?Hello cutter, question for we @welight ...im getting ready to order a mau kit along with 4 of the angelina reflectors for another diy light with cxb3590 i already have, it appears the adapters to mount the reflectors are out of stock, are the kits shipping with adapters and are they available to order separately?
YesYou in the US?
no problem, all back in stock nowHello cutter, question for we @welight ...im getting ready to order a mau kit along with 4 of the angelina reflectors for another diy light with cxb3590 i already have, it appears the adapters to mount the reflectors are out of stock, are the kits shipping with adapters and are they available to order separately?