CX-6 vs. CX300

DynamiteBob said:

Hey guys!

I'm looking at buying either a Johnson cx-6 or Pacific Light cx300 for my 3x3 tent.

any opinions on which one is better?

Click to expand...

topcat said:

I would choose the PLC because of the 3500K temp, better PPFD number and it looks better. And now, more reasons. ^^

Click to expand...

Greengenes707 said:

PLC CX300
-Top bin CXB 3070(BB bin)
-Highest efficiency drivers available
-highest grade optics
-custom made/designed housing(21x21", with good spacing for coverage)
-Completed grow and journals from multiple users
-Assembled in the USA(in CA by a UL and ETL certified factory)

JGL cx-6
-rebranded china/go green fixture
-CXA's not new CXB's
-chinese 1.3a driver
-Small housing, limits spread
-made in china


The PLC puts out over 120PPF more from amount of chips.Then count the more efficient drivers...and you have a significantly more efficient light at every level with the PLC cx300


I urge anyone to double check and correct if wrong. There are clear and substantial differences. And the cx300 is ahead of them all.

Code: GG700 at checkout saves 50$

Click to expand...

Greengenes707 said:

PLC CX300
-Top bin CXB 3070(BB bin)
-Highest efficiency drivers available
-highest grade optics
-custom made/designed housing(21x21", with good spacing for coverage)
-Completed grow and journals from multiple users
-Assembled in the USA(in CA by a UL and ETL certified factory)

JGL cx-6
-rebranded china/go green fixture
-CXA's not new CXB's
-chinese 1.3a driver
-Small housing, limits spread
-made in china


The PLC puts out over 120PPF more from amount of chips.Then count the more efficient drivers...and you have a significantly more efficient light at every level with the PLC cx300


I urge anyone to double check and correct if wrong. There are clear and substantial differences. And the cx300 is ahead of them all.

Code: GG700 at checkout saves 50$

Click to expand...