Digital Thermostat that will run intake/exhaust fans as well as in-duct ozone.

The unit is the size of a single gang electrical box and 1 1/2" wide. You can directly plug in your intake and exhaust fans and I built the unit so that you could plug it directly into a standard 110 outlet without hard-wiring. The unit will also control an induct ozone generator with a 4min start of ozone before your exhaust fans kick on. The ozone can be run with the 4min delay/ or switched off independently from the fans. There is also an independent plug receptacle that can handle small humidifiers/dehumidifiers or other small applications up to 9 amps(1000 watts) independently from the fan side. The fan side can handle up to a maximum of 13 amps(1500watts).The ozone generator can be up to 1amp max(100watts). I have used the unit for two weeks and it works flawlessly---Plug in your fans/plug in your ozone generator/set desired temp and the unit does all the work. I want to give some credit to AL. B FUCT for his digital JAYCAR thermostat---his unit got my brain-juices going.The unit cost me less than 50.00 to build and one hour to put it all together. I will take some pics as soon as I find my camera. (hopefully tonight)

What happened to this...do you have any pics...? Itd be sick if you did

Cann said:

What happened to this...do you have any pics...? Itd be sick if you did

Click to expand...

Sorry-- my cam took a shat!!!- as soon as I get a new cam pics will be posted. I apologise for the tease and should have waited to post this thread with the pics. Very soooooooon...

Aight haha take youre time...

Peace

doc this is the first time I've seen you stink so bad at the interweb. LOL. Waiting patiently

Waiting for this too man.

Landragon said:

doc this is the first time I've seen you stink so bad at the interweb. LOL. Waiting patiently

Click to expand...

You are so right---sorrrrrrreeeeeeyyyyyy----I have been told that Santa is bringgingggggg me a camera for Christmas---maybe I will get it Early. Thanks for your patients.

damn....i was excited about this....

ITS CHRISTMAS WHERE ARE OUR PICS!

can I order one and have you install a humidistat on there for humidity control of the humidifier. If i can control that by % and the exhaust by degrees F I would be most interested in possibly just buying a unit from you and having you ship it! since you dont have pics and all

I have a tent coming that I want to be able to control everything to specs and not have to tend to it every few hours.

i want a tutorial on this!@!!!!!!!! NOW!!

It might be time to call it /fail for the docta

shit i was looking for this thread found it got my hopes up now im crushed i thought i found a thread doing this before so im going back and search more im right in the middle of the build of the room my plants want there new home

Sorry it took so long---now I just have to fig out the camera----lol... I will try to answer any questions you have but the basics are that you can run your intake/exhaust fans w/ozone in line with a 4 min start before exhaust kicks on(Great for smell build up in room)---the unit can be configured in a varitity of ways to run ----fans /humidifiers/dehumidifiers-ozone generators/ A/C units/heaters---the unit controls three separate lines----1AMP/13AMP/9AMP----with the 1amp line having a 4min pre start over the combined 13AMP or 9AMP. As you see in the first photo I hard wired a 4 plug extension with switch---the second is a single plug to run my induct ozone. You could plug both the intake and exhaust fans on the same line----I like to run extension with plugs off the units for ease of use and plug-n-play setups----set your temp and the unit will cycle your fans and keep your room within +-2deg.

Have to take a couple more pics---the pics I thought I took were movies.

Fuck Yeah! I knew you'd come through! +reps 4 U

Thanks----it gets better-----give me a few minutes with this camera and software.

DR. VonDankenstine said:

Thanks----it gets better-----give me a few minutes with this camera and software.

Click to expand...

Let me put it this way: if you can figure out the automated system you describe, there is a good chance you can operate a digi cam...Damn there in no "crossed fingers" emoticon...

pinkus said:

Let me put it this way: if you can figure out the automated system you describe, there is a good chance you can operate a digi cam...Damn there in no "crossed fingers" emoticon...

Click to expand...

I'm not going to promise pics anytime soon for the next one but I think I have figured out a system(close to hydro-hut/tent style) for perfectly drying buds that can be set by the user to dry over a one to two week period---It has vent-fans tied into the same digi-therm controller I posted but with a humidistat controlled humidifier built in. Set it and forget it.

hmm ok i have a little different thermostat then you i got at homedepot its for a house..... and im going to hook it up to pc fans.........do you have info on the wiring ?? and pcfans are dc i believe so would that work ???

Hulk Nugs said:

hmm ok i have a little different thermostat then you i got at homedepot its for a house..... and im going to hook it up to pc fans.........do you have info on the wiring ?? and pcfans are dc i believe so would that work ???

Click to expand...

Yes it can work---you will need to get the correct DC power supply(you need to find out what the unit is----I'm going to guess 24 volt dc). Try this site for wiring that rocker!!! The RiteTemp Support Site - Detailed Wiring Diagrams