stofmonster
Active Member
This system is the bomb I am only 1week into my first set in the flowerroom but I actully get giggly when I walk in there my scraggly dirt plants are hiding there faces lol
Nice lookin Girls
DirtHawkers first indoor aero/nft "stinkbud design" medical grow
- Thread starter DIRTHAWKER
- Start date
Nice lookin Girls
DIRTHAWKER
Well-Known Member
my plant spacing is 7 inches on center or there abouts..(i just eyeballed it)wow you got some big girls there. lookin good
what kinda spacing are you doing between pots?
Im planning on running 8' long fence post and am thinking of 8" spacing center to center on the net pots. I just dont want them super crowded, but I dont want to waste space either. 9'x10' about room just for flowering.
thanks for your time
I really like your contactor relay,, i just am lost on how to build it...If i went to an electrical shop and asked them to build one for me what should i say?
andyman
Well-Known Member
I plan on making a cleaner/more visable set of plans for the relay, when my boss isnt at work so I can use the scanner again.
Since you have got this up and running is 7" good enough spacing? or are they crowded a little?
Im thinking 8" or 10"spacing but if 7" works good enough than I will use it. Since Im doing long runs I figured I could give em more room. Just looking for feedback from peeps that made master stinkbuds plans so I can adapt them for my room.
thanks
DIRTHAWKER
Well-Known Member
Thanks for the compliments all.
andy,, Thanks for taking the time to get those plans, it will be great to have the peace of mind. My setup is pretty crowded , but i couldnt go any further apart without sacrificing the number of holes...48 inch post divided by 7 gives me just about 7 inch spacing.....mine are very crowded beacuse i used 24/7 lighting in veg and they grew very big. If i could start over i would sacrifice a hole or two in each post and just grow bigger plants.
Revpip.. im constantly topping of the reservoirs,, those bitches drink alot of water,,on average i fill them every other day (like 4-5 gallons each)
The nutes stay pretty constant, i check the ppm after each refill and most of the time its right up around 2000,,, if it has dropped i just add some leftover nutes to bring it back up. Then i check the ph and most of the time i need to use ph down.
good luck to you all.
andy,, Thanks for taking the time to get those plans, it will be great to have the peace of mind. My setup is pretty crowded , but i couldnt go any further apart without sacrificing the number of holes...48 inch post divided by 7 gives me just about 7 inch spacing.....mine are very crowded beacuse i used 24/7 lighting in veg and they grew very big. If i could start over i would sacrifice a hole or two in each post and just grow bigger plants.
Revpip.. im constantly topping of the reservoirs,, those bitches drink alot of water,,on average i fill them every other day (like 4-5 gallons each)
The nutes stay pretty constant, i check the ppm after each refill and most of the time its right up around 2000,,, if it has dropped i just add some leftover nutes to bring it back up. Then i check the ph and most of the time i need to use ph down.
good luck to you all.
420weedman
Well-Known Member
beautiful! im tuned in for the harvest 
StinkBud
Well-Known Member
Remember when you were worried about the PVC pipe blocking the light?
I remember thinking how funny that was at the time. I think you get the joke now.
Your stoked with that 4th light bro! It's going to be way better than my 2-1K lights.
I can hardly wait to see your harvest. I just picked most of mine Saturday. I left the Elvy and Skunk to finish up a few more days.
One more thing. Two weeks is a long time in the flower system. Even though the plants may not look ready to start the flush they probably are.
As soon as you start your flush the pistols will start to turn within just a few days. You will also notice that the new growth stops and the buds will start to ripen.
It's kind of like a signal to the plants to wake the fuck up and finish.
You're making me look good! Keep up the great work bro!
DIRTHAWKER
Well-Known Member
LMAO!! THATS F,IN HILARIOUS!!
Its funny about the pvc pipe blocking light...how did you resist laughing at me..lol
anyhow heres a pic of a bunny who smoked a little to much redgrape. I told that bunny to stay outta the marijuana patch!!!
Attachments
justinsbigbuds
Active Member
hey dirth how many watts you have going and what do you think grams is one of your setup going put out
StinkBud
Well-Known Member
WTF that's the biggest hawk I've ever seen! Is that yours?
That looks as big as the bald eagles we have around here!
Hide the cats and dogs!
Gotta a problem with the neighbors barking poodle? Call Dirt...
DIRTHAWKER
Well-Known Member
Gotta a problem with the neighbors barking poodle? Call Dirt...
more like gotta problem with rodents...
call the dirthawker...ill leave it to your imagination.hey stink how did the garbage bag liner work out for ya?
also..my dehumi fills up so much im starting to think its sucking water from my waterfalls..lol what do you think?
DIRTHAWKER
Well-Known Member
Im getting close to flush time!!!
andyman
Well-Known Member
wow
super nice, I cant wait till mine are going
potpimp
Sector 5 Moderator
I got "Welcome to the Jungle" stuck in my head while looking at your pix, LOL. SUPER JOB!!
i know i am a pain i want to build cloner veg unit and flower station i need 18 gal rubbermaids tughneck i just can't find dimentions on any of the designs i pretty much know the part list do you do about or is it exact measurments thanks i will post some more pics of my systems todat i never did aeroponics yet just top feed drip ebb and flo
grodrowithme
Well-Known Member
wow dude i love how you took his design and made it your own custom one and the plants look really good just thought i drop by and check you out bro good drowing
DIRTHAWKER
Well-Known Member
Thanks for stopping by guys..
My flush was started and am in the process of installing a RO machine to clean up my 600ppm tap water.
It wont be long now...the smell of my room is so awesome if i could i would live in there..lol
My flush was started and am in the process of installing a RO machine to clean up my 600ppm tap water.
It wont be long now...the smell of my room is so awesome if i could i would live in there..lol
repvip
Well-Known Member
These final weeks are killing me!
What's the good word on the dehumidifier? Does it pull water out of the reservoirs? What is your setpoint?
Just got mine installed last night--up early to check it out--60% setpoint with 3/4gal water after 8 hours and temp 84
Have to admit... that's way more water than I expected for 60% setpoint!
Good luck on the RO! 600 ppm is some nasy tapwater, hehe. It's around 300-400 here, usually smack dab in the middle.
What's the good word on the dehumidifier? Does it pull water out of the reservoirs? What is your setpoint?
Just got mine installed last night--up early to check it out--60% setpoint with 3/4gal water after 8 hours and temp 84
Have to admit... that's way more water than I expected for 60% setpoint!Good luck on the RO! 600 ppm is some nasy tapwater, hehe. It's around 300-400 here, usually smack dab in the middle.