DIY 30 plant Flood And Drain system

So I have been on these forums for a while now just reading but decided to start my own project. I currently am in no situation to be growing weed, however i love smoking and also growing all kinds of edible plants in general. I decided to build a hydro system. I wanted to copy the more expensive ones and build a low pressure aero system but after reading some stuff about them decided not to. In reality they are just more complex NFT systems because the mist produced by a low pressure pump does not break up the water/nutrient solution enough. So i decided to go with a flood and drain system. Using 4" vinyl fence post, endcaps, 3/4" pvc pipe, and 12 uniseal bulkheads i came up with this.

You might want a way to clean the drains of the tubes?

looks good man...

clean the drains off the tubes? right now the drains do come out they do not need glue to be sealed not shure if i understand your question

So you did it just to do it?

looks great man!

get growing some tomatoes or something now haha


only one thing that i might have done differently is the way the tubes drain, i feel like there would be a small puddle at the end of the tube since the pvc drain is not all the way to the end. Very minor however