DIY 36 Site Aeroponic in a HOMEbox XL under a 600W HPS
- Thread starter DubB83
- Start date
DubB83
Well-Known Member
You want the list of the Aeroponic system right?
I'll attach an excel spreadsheet for that with basic descriptions listed and it will be up to who ever downloads it to interpret it and/or find appropriate substitutes.
I had figured that price was subject to location and decided it was not relevant so will not be listed. Neither will exact part numbers or vendors.
If you have questions about where to get specific items you can ask me and I'll give you my suggestions on where to find the items.
kid cannabis
Well-Known Member
loooking good i love the system keep it up
DubB83
Well-Known Member
LOL, that is an old scrubber, years old... I had a post on overgrow about it years ago. I'll take some picture of it and detail it later tomorrow or some time. Basically it is a laundry hamper with activated carbon sandwiched between the outside cotton walls and an inside dryer vent with screening.
I need to replace the carbon in it soon and will show you all of the details.
Thanks for the +rep on the RO system, right now it is my pride and joy.
I have been trying to +rep you but I'm stingy with my +reps and have not spread around enough love I guess!
DubB83
Well-Known Member
What size box are you planning? The same size? I'm growing single stem lollipop style so my sites are relatively close together, if your growing a plant full term space them out a bit more than mine.
Post up a link, you have my attention.
lilmafia513
Well-Known Member
looking very nice Dub!
Question:
You mentioned earlier up the page, about a shopping list for making the aero system. Where is that at, or have you posted yet? I wanna try this but don't wanna spend the outrageous price on one.
Also, what is the clear tube attached to the center of the aero unit?
Question:
You mentioned earlier up the page, about a shopping list for making the aero system. Where is that at, or have you posted yet? I wanna try this but don't wanna spend the outrageous price on one.
Also, what is the clear tube attached to the center of the aero unit?
DubB83
Well-Known Member
The computer I used to design the system is crapping out on me, so I'll just make a basic list for now until I gain access to the excel file again.
6X 4"x4"x46" Vinyl fence posts
12X 4"x4" Vinyl fence post end caps
40' of 1/2" OD PVC
30x 360* Sprayers
12x 180* Sprayers
4X 1/2" ID PVC 90* Elbows
8X 1/2" ID PVC Ts
3X 1/2" ID PVC Ball Valves
1/2" ID 4 Way PVC Joint
1/2" ID Clear Vynil flexible tubing
2X 1/2" OD 90* Barbed Bulkhead Fittings
2X 3/4" OD Straight Barbed Bulkhead Fitting
3/4" ID Black Vinyl Tubing
1096GPH ECO Plus Water Pump
12X 1/2" ID Rubber Grommets
Trash Can (External Res)
Large Rubbermaid Tub (Main Res/Aeroponic base)
36X 3" Net pots and foam covers
Airpump
Airstone
Air Tubing
ART-DNe timer
Power strip
GFCI Main High Amp Extension cord
Optional (depending on location, climate area, average room temperature, and preferences):
Humidifier
Heater
Dehumidifier
Carbon Scrubber
RO Filter
About the tent:
HOMEbox XL
600W HPS
200 CFM Inline Exhaust Fan
Ductstat
Air/water connection pieces (be inventive or get a plumber to help you out)
I'm sure there is something I'm missing. That is just off the top of my head.
6X 4"x4"x46" Vinyl fence posts
12X 4"x4" Vinyl fence post end caps
40' of 1/2" OD PVC
30x 360* Sprayers
12x 180* Sprayers
4X 1/2" ID PVC 90* Elbows
8X 1/2" ID PVC Ts
3X 1/2" ID PVC Ball Valves
1/2" ID 4 Way PVC Joint
1/2" ID Clear Vynil flexible tubing
2X 1/2" OD 90* Barbed Bulkhead Fittings
2X 3/4" OD Straight Barbed Bulkhead Fitting
3/4" ID Black Vinyl Tubing
1096GPH ECO Plus Water Pump
12X 1/2" ID Rubber Grommets
Trash Can (External Res)
Large Rubbermaid Tub (Main Res/Aeroponic base)
36X 3" Net pots and foam covers
Airpump
Airstone
Air Tubing
ART-DNe timer
Power strip
GFCI Main High Amp Extension cord
Optional (depending on location, climate area, average room temperature, and preferences):
Humidifier
Heater
Dehumidifier
Carbon Scrubber
RO Filter
About the tent:
HOMEbox XL
600W HPS
200 CFM Inline Exhaust Fan
Ductstat
Air/water connection pieces (be inventive or get a plumber to help you out)
I'm sure there is something I'm missing. That is just off the top of my head.
DubB83
Well-Known Member
More pictures:
Here is a plant I haven't taken many pictures of.
A very healthy plant that has been in the system from day one.
It's developing well, very compact and dense.
This is how I use the clear tubing with the ball valve to water plants, you asked what it is attached to, it is only attached to the pump manifold that supplies the sprayer lines for easy reservoir maintenance. I can pump water to anywhere I want.
Watering the soil plants with the clear tube on top
Mixing the reservoir with the clear tube on top
Here is a plant I haven't taken many pictures of.
A very healthy plant that has been in the system from day one.
It's developing well, very compact and dense.
This is how I use the clear tubing with the ball valve to water plants, you asked what it is attached to, it is only attached to the pump manifold that supplies the sprayer lines for easy reservoir maintenance. I can pump water to anywhere I want.
Watering the soil plants with the clear tube on top
Mixing the reservoir with the clear tube on top
growman3666
Well-Known Member
hello hello veeerryy nice
lilmafia513
Well-Known Member
very nice....you said all the supplies only cost $45.00?
That's a good price, but seems low for the cost of the PVC fence post alone. What do they run?
Thanks for clarifying the tube, that makes sense and looks very convienent. Wish i had easy access to water like that. Gotta walk up and steps with buckets now.
That's why i'm in soil now, you imagine luggin' 30 gallons or more for the resevoir changes? LOL!!!!
That's a good price, but seems low for the cost of the PVC fence post alone. What do they run?
Thanks for clarifying the tube, that makes sense and looks very convienent. Wish i had easy access to water like that. Gotta walk up and steps with buckets now.
That's why i'm in soil now, you imagine luggin' 30 gallons or more for the resevoir changes? LOL!!!!
DubB83
Well-Known Member
The $45 was for the RO option. I hear you on the water issue, I did it in the past and now I do this.
forgot how much the entire system cost me.
lilmafia513
Well-Known Member
that's cool, i'll be starting to price it out this weekend maybe. I'll let ya know what i come up with if i can find it all. I really want to do a grow like this, but think i need to wait to get everything setup right first.The $45 was for the RO option. I hear you on the water issue, I did it in the past and now I do this.
DubB83
Well-Known Member
I thought about posting vendors, prices and part numbers but decided it was location dependent and might give away the part of the world.
A rough estimate to complete my entire SoG setup would be a big chunk all at once, but acquired over time it is not bad, especially when you bargain shop.
growman3666
Well-Known Member
how much did the tent itself costI thought about posting vendors, prices and part numbers but decided it was location dependent and might give away the part of the world.
A rough estimate to complete my entire SoG setup would be a big chunk all at once, but acquired over time it is not bad, especially when you bargain shop.
lilmafia513
Well-Known Member
that's the only way to shop for me!LOL!!!I thought about posting vendors, prices and part numbers but decided it was location dependent and might give away the part of the world.
A rough estimate to complete my entire SoG setup would be a big chunk all at once, but acquired over time it is not bad, especially when you bargain shop.
DubB83
Well-Known Member
I got the tent from the local hydro shop for around $230.
Good investment, if I had the time I would have build a GypsyBush tent.
