MR Zulu
Well-Known Member
I may never order from them again, I'm not impressed with quality control from them.
DIY E-Nail
- Thread starter budbro18
- Start date
schonwandabs
Member
Sorry on that, not going to push them away. Just be helpful on the enail with what I know about it
MR Zulu
Well-Known Member
hey Jan , side question. If I have the Omron E5CC-RX2ASM-800 that has a output of 110v could i bypass the SSR and hook my coil up to the PID with the 110v output? instead of the Omron
E5CC-QX2ASM-800 that has a 12v output for SSR triggering.
Last edited:
schonwandabs
Member
I will give you an answer on Monday, not so clear of your writing as english is not so good. These weekends, also invite some friends to visit us. Have a good weekend
schonwandabs
Member
Brett, I am back now, I just have an Omron E5CC-QX2ASM-800 which will be connecting with an SSR while yours with RELAY.
1,2 to Relay, 5 TC-, 6 TC +, 11, 12 to L, N cord.
Possible price I guess will be 125-130USD for the whole kits on it, Do not know USA price on it
schonwandabs
Member
For QX2ASM, make sure the SSR with the right poles, otherwise, it will not heat up or working
schonwandabs
Member
hmm?
budbro18
Well-Known Member
You can pull back the sleeve of the xlr/end of coil to see that everything is. Usually you can unscrew the XLR and basically take all the side shit off except the actual plug. Not sure if this was mentioned when you guys were talking about the pin outs of the different coils.
After that you can deduce what the wires are.
There will be 2 of the same color. Usually grey or white. Those are Coil power. Either work for either +/-
A red and a black that are super thin gauge. Those will be the thermocouple leads.
And one green or yellow or "ground colored" haha. Obviously your ground.
Hope this helped!
After that you can deduce what the wires are.
There will be 2 of the same color. Usually grey or white. Those are Coil power. Either work for either +/-
A red and a black that are super thin gauge. Those will be the thermocouple leads.
And one green or yellow or "ground colored" haha. Obviously your ground.
Hope this helped!
schonwandabs
Member
That is ok to tell this coil diagram also, as red and black usually for the TC+ and TC-, Ground wire is the grounded colors
AC power wires are the same color usually
schonwandabs
Member
Brett, You got the wrong model, the model you get is not for SSR
schonwandabs
Member
SSR is the direct currency relay, So you need to tell + and -, If possible, you can buy a relay again, but remember, that is not SSR
MR Zulu
Well-Known Member
. I don't have one , it was just a question about the RX series. That's all.
schonwandabs
Member
Ok, You can not bypsss the RX service with a SSR
schonwandabs
Member
RX Ormmon to Relay while QX Ormon to SSR
schonwandabs
Member
Hey, some enails finished
Attachments
MR Zulu
Well-Known Member
schonwandabs
Member
Some of the 1.5M coil wire finished
Attachments
MR Zulu
Well-Known Member
wow those are some long cables, hook it up